Joan Antoni Terre
2009-Aug-04 08:40 UTC
[asterisk-users] dahdi_scan doesn't recognize an OpenVox A400E
Hi everybody, In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize the OpenVox. This card was working correctly but suddenly stopped working and I cannot make it work again. Both ?lspci? and ?dahdi_hardware? detect it but ?dahdi_scan? not and I cannot use it.>lsppci:*0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface* 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01)> dahdi_hardware:pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P As you can see, it seems that wctdm driver is not loaded (minus sign beside wctdm) but if I restart dahdi, it loads it correctly: Loading DAHDI hardware modules: wctdm: [ OK ] wcb4xxp: [ OK ] Running dahdi_cfg: [ OK ] The dahdi_scan result is the following: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [3] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 3 name=B4/0/3 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=7 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [4] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 4 name=B4/0/4 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=10 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS The lsdahdi result is the following: ### Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS 1 BRI Clear (In use) (EC: MG2) 2 BRI Clear (In use) (EC: MG2) 3 BRI Hardware-assisted HDLC (In use) ### Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS 4 BRI Clear (In use) (EC: MG2) 5 BRI Clear (In use) (EC: MG2) 6 BRI Hardware-assisted HDLC (In use) ### Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS 7 BRI Clear (In use) (EC: MG2) 8 BRI Clear (In use) (EC: MG2) 9 BRI Hardware-assisted HDLC (In use) ### Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS 10 BRI Clear (In use) (EC: MG2) 11 BRI Clear (In use) (EC: MG2) 12 BRI Hardware-assisted HDLC (In use) I?ve tried to re-install dahdi-linux and dahdi-tools but stay the same. Does anybody know what could be wrong? Many thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090804/abde4288/attachment-0001.htm
Tzafrir Cohen
2009-Aug-04 08:57 UTC
[asterisk-users] dahdi_scan doesn't recognize an OpenVox A400E
On Tue, Aug 04, 2009 at 10:40:15AM +0200, Joan Antoni Terre wrote:> Hi everybody, > > > > In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a > Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize > the OpenVox. This card was working correctly but suddenly stopped working > and I cannot make it work again. Both ?lspci? and ?dahdi_hardware? detect it > but ?dahdi_scan? not and I cannot use it. > > > > >lsppci: > > *0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN > interface* > > 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) > > > > > dahdi_hardware: > > pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F > pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P > > > > As you can see, it seems that wctdm driver is not loaded (minus sign beside > wctdm) but if I restart dahdi, it loads it correctly: > > Loading DAHDI hardware modules: > wctdm: [ OK ] > wcb4xxp: [ OK ] > > Running dahdi_cfg: [ OK ] >The module load. That does not mean it has detected any device. I suppose that the output of dahdi_hardware will be as before. As to the question of why the card was not picked up by that module: that's a good question. Maybe you need to contact the support of the vendor of the card (But what do I know about PCI cards, anyway? ;-) ) -- Tzafrir Cohen icq#16849755 jabber:tzafrir.cohen at xorcom.com +972-50-7952406 mailto:tzafrir.cohen at xorcom.com http://www.xorcom.com iax:guest at local.xorcom.com/tzafrir