search for: syncsrc

I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting slips and ask me to update the clock source. I have my system.conf set as the following but when I run dahdi_scan only the ports on Card 1 are showing up with syncsrc=1 system.conf : span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,2,0,esf,b8zs bchan=26-48 mtp2=25 span=3,3,0,esf,b8zs bchan=49-72 span=4,4,0,esf,b8zs bchan=73-96 span=5,5,0,esf,b8zs bchan=97-120 span=6,6,0,esf,b8zs bchan=121-144 span=7,7,0,esf,b8zs bchan=145-168...

...e managed to set up the card with the Dahdi kernel, as demonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=32 totchans=31 irq=16 type=digi...

...brs-dev*CLI> dahdi show version DAHDI Version: 2.3.0 Echo Canceller: KB1 Each LED is green but dahdi_scan says : # dahdi_scan [1] active=yes alarms=OK description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca name=ztqoz/1/1 manufacturer= devicetype= location= basechan=1 totchans=3 irq=0 type=digital- syncsrc=0 lbo=399-533 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding=AMI framing=CCS 1. Is this syncsrc=0 normal (we're in TE mode) ? 2. Am I correct to hope "pri show spans" to display something ? 3. Suggestions ? Regards -------------- next part -------------- An HTML attachment wa...

...wcb4xxp+ d161:b410 Digium Wildcard B410P but ?dahdi_scan? just recognize the B410P: [1] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=...

...g: [ OK ] The dahdi_scan result is the following: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=3...

...dBRI ISDN card ------------------------------------------ root at pbx:~ $ dahdi_scan [1] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=HFC-4S Junghanns.NET quadBRI PCI location=PCI Bus 06 Slot 03 basechan=1 totchans=3 irq=78 type=digital-TE syncsrc=0 lbo=399-533 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=HFC-4S Junghanns.NET quadBRI PCI location=PCI Bus 06 Slot 03 basechan=4 totchans=3 irq=...

...use 0 - Unknown) then I can investigate those. Some details below: geriatrix ~ # dahdi_scan [1] active=yes alarms=OK description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE210P (4th Gen) location=Board ID Switch 0 basechan=1 totchans=24 irq=48 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE210P (4th Gen) location=Board ID Switch 0 basechan=25 totchans=24 irq=48 type=d...

...l goes into the bridge with spans 2, 3 or 4, I start getting clicks and the call quality goes down. Also of note is that span 1 has always worked correctly, even when bridging is between channels in the same span 1. Another thing that I find odd is the output of dadhi_scan, that indicates that syncsrc=0 for all spans. Is that correct? [1] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 1 name=TE4/0/1 manufacturer=Digium devicetype=Wildcard TE420 (4th Gen) (VPMOCT128) location=Board ID Switch 0 basechan=1 totchans=31 irq=177 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) co...

...channels available! Using Primary channel 16 as D-channel anyway! gentoo1 ~ # dahdi_scan [1] active=yes alarms=LMFA/OK description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (5th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS/CRC4 [2] active=yes alarms=LMFA/OK description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE220 (5th Gen) location=Board ID Switch 0 basechan=32 totchans=31 irq...

...TE2/0/1/22 Clear RED 23 TE2/0/1/23 Clear RED 24 TE2/0/1/24 HDLCFCS RED 5. dahdi_scan [1] active=yes alarms=BLU/RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE210P location=Board ID Switch 0 basechan=1 totchans=24 irq=22 type=digital-T1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE210P location=Board ID Switch 0 basechan=25 totchans=24 irq=22 type=digital-T1...

...| N/A | Disconnected | wanpipe3 | AFT TE1 | N/A | Disconnected | wanpipe4 | AFT TE1 | N/A | Disconnected | However: # dahdi_scan 2 [2] active=yes alarms=OK description=wanpipe2 card 1 name=WPE1/1 manufacturer= devicetype= location= basechan=1 totchans=31 irq=0 type=digital- syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Why are the dahdi tools not reflecting the values by wanrouter? Roger.

...ng fine. I put a loop plug the ports and same problem. dahdi_scan [9] active=yes alarms=RED/LFA/LMFA description=T4XXP (PCI) Card 2 Span 1 name=TE4/2/1 manufacturer=Digium devicetype=Wildcard TE410P (4th Gen) (VPMOCT128) location=PCI Bus 10 Slot 04 basechan=193 totchans=24 irq=50 type=digital-T1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [10] active=yes alarms=RED/LFA/LMFA description=T4XXP (PCI) Card 2 Span 2 name=TE4/2/2 manufacturer=Digium devicetype=Wildcard TE410P (4th Gen) (VPMOCT128) location=PCI Bus 10 Slot 04 basechan=217...

Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:

...y allows me to select "0" in the "Sync/Clock Source" field. "0" is the only option in the drop down.) dahdi_tool is showing some "IRQ Misses" and is listing "Sync Source" at the"Wildcard TE121 Card 0." But, dahdi_scan is returning "syncsrc=1" ********************************************************************************************************************* == Primary D-Channel on span 1 up == Primary D-Channel on span 1 down == Primary D-Channel on span 1 up == Primary D-Channel on span 1 down == Primary D-Channel o...

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

...euroisdn signalling = bri_cpe_ptmp ;signalling = pri_cpe channel => 1-2 dahdi_scan give me for port: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 12 basechan=1 totchans=3 irq=5 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS Asterisk and DAHDI are compiled with libpri as: # strings /usr/lib/asterisk/modules/chan_dahdi.so|grep 'DAHDI Tele' DAHDI Telephony Driver w/PRI DAHDI Telephony w/PRI I took...

Hi All, I have a TE121P card installed and since connected it to the PRI I keep getting the Current Alarm as continually changing from Blue Alarm/Recovering and Recovering. The config I have is: /etc/dahdi/system.conf bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 loadzone = cn defaultzone = cn /etc/asterisk/chan_dahdi.cfg [channels] Context=telco

...ight be of value. # dahdi_hardware pci:0000:04:00.0 wcte12xp+ d161:8001 Wildcard TE122 # dahdi_scan [1] active=yes alarms=OK description=Wildcard TE122 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE122 location=PCI Bus 04 Slot 01 basechan=1 totchans=31 irq=20 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS chan_dahdi.conf contains: echocancel=yes echocancelwhenbridged=yes echotraining=800

...nk to documentation is really appreciated. Here goes some info about what I have: # dahdi_scan [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 (VPMADT032) location=PCI Bus 37 Slot 09 basechan=1 totchans=31 irq=32 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Asterisk version: 1.8.0 Dahdi version: dahdi-linux-complete-2.4.0+2.4.0 libpri version: libpri-1.4.11.4 openr2 version: openr2-1.2.0 My location: Argentina Again, if you have any tip, I'll...

...d I'm using is a Digium TE122. I'd prefer not having to run with the echo canceler off of course... [1] active=yes alarms=OK description=Wildcard TE122 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE122 location=PCI Bus 03 Slot 03 basechan=1 totchans=24 irq=35 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF Thanks. -- James