Displaying 20 results from an estimated 23 matches for "b4xxp".
Did you mean:
t4xxp
2012 Feb 03
2
Junghanns QuadBri install help
Hi,
I have a Junghanns QuadBri installed and seems to be detected and working
correctly using the wcb4xxp driver
All ports are configured as TE
The problem is when I connect an ISDN line - the LED turns green and Dahdi
status shows Alarm OK
But when I try to make a call I get "All circuits are busy" cause 27
I have searched and web and tried numerous configs but it doesn't want to
play....
2011 Apr 06
3
BRI Configuration help me
...type=euroisdn
signalling=bri_cpe
pridialplan=unknown
prilocaldialplan=unknown
group=0
channel => 1,2,4,5,7,8,10,11
:::dahdi-channels.conf
group=0,11
context=from-pstn
switchtype =
euroisdn
signalling =
bri_cpe
channel =>
1-2
context =
default
group =
63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
RED
group=0,12
context=from-pstn
switchtype =
euroisdn
signalling =
bri_cpe
channel =>
4-5
context =
default
group =
63
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS
RED
group=0,13
context=from-pstn
switchtype =
euroisdn
signalling...
2010 Apr 17
0
B410P and DTMF
...gium B410P card.
Incoming and outgoing call are working.
I use the following version :
* libpri-1.4.10.2
* dahdi-2.2.1.1
* asterisk-1.6.2.6
On incoming calls, DTMF is not working, i can't see any logs.
Here are the main configuration files :
dahdi-channels.conf
;; Span 2: B4/0/1 "B4XXP (PCI) Card 0 Span 1"
signalling=bri_cpe
callerid=asreceived
group=5
context=trunk_5_0
language=fr
channel => 5-6
;; Span 3: B4/0/2 "B4XXP (PCI) Card 0 Span 2"
signalling=bri_cpe
callerid=asreceived
group=6
context=trunk_7_0
language=fr
channel => 8-9
;; Span 4: B4/0/3 "B...
2010 Jun 16
0
Asterisk +Dahdi does not work with BRI NT
...************
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jun 16 22:49:10 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
span=2,2,0,ccs,ami
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3&qu...
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
...=0 DL event: Q931_DL_EVENT_DL_RELEASE_IND(3)
PRI Span: 1 SAPI/TEI=0/0 Kick starting link
PRI Span: 1 TEI=0 Sending SABME
PRI Span: 1 Changing from state 4(TEI assigned) to 5(Awaiting establishment)
PRI Span: 1 TEI=0 Sending SABME
Below you can find the /etc/dahdi/system.conf
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS RED
span=1,0,0,ccs,ami
# termtype: nt
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
span=2,0,0,ccs,ami
# termtype: nt
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Span 3: B4/0/3 "B4XXP...
2009 Aug 04
1
dahdi_scan doesn't recognize an OpenVox A400E
...use it.
>lsppci:
*0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface*
11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01)
> dahdi_hardware:
pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F
pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P
As you can see, it seems that wctdm driver is not loaded (minus sign beside
wctdm) but if I restart dahdi, it loads it correctly:
Loading DAHDI hardware modules:
wctdm: [ OK ]
wcb4xxp:...
2010 Jun 17
4
Asterisk + Dahdi does not work with BRI NT mode
...************
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jun 16 22:49:10 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,ami
# termtype: te
bchan=1-2
hardhdlc=3
echocanceller=mg2,1-2
# Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
span=2,2,0,ccs,ami
# termtype: te
bchan=4-5
hardhdlc=6
echocanceller=mg2,4-5
# Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3&qu...
2010 Jan 05
1
DTMF detection on dahdi with b4xxp (again, some more details)
Hi,
I tried again getting DTMF detection on my ISDN devices with dahdi going
again. I used the channel debug to see whether asterisk sees the frames
and detects them as DTMF.
Interestingly here's what works:
1. GSM phone -> chan_dahdi g1 -> asterisk -> can_sip -> SIP phone
Both the GSM phone and the SIP phone can issue DTMF that will be
detected as features (transfer)
2.
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
...ary D-channel of span 1
[Dec 16 19:02:36] NOTICE[12786]: chan_dahdi.c:12931 pri_dchannel: PRI
got event: HDLC Abort (6) on Primary D-channel of span 2
======================================================================
Here's dmesg:
[ 2254.282352] dahdi: Version: 2.3.0.1
[ 2254.285768] wcb4xxp 0000:01:06.0: probe called for b4xx...
[ 2254.285768] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [LNKA] -> GSI
18 (level, low) -> IRQ 18
[ 2254.285768] wcb4xxp 0000:01:06.0: Identified Wildcard B410P
(controller rev 1) at 000000000001ec00, IRQ 18
[ 2254.285768] wcb4xxp 0000:01:06.0: VPM...
2008 Dec 03
0
What IRQ field from "dahdi show status" means ?
Hi,
On my system I've got :
CLI> dahdi show status
Description Alarms IRQ bpviol CRC4 Fra
Codi Options LBO
B4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS
AMI YEL 0 db (CSU)/0-133 feet (DSX-1)
B4XXP (PCI) Card 0 Span 2 OK 0 0 0 CCS
AMI YEL 0 db (CSU)/0-133 feet (DSX-1)
B4XXP (PCI) Card 0 Span 3 RED 0 0 0...
2009 Dec 04
1
Dahdi_genconf does not generate NT/TE configuration
Hi,
I'm using revision 6822 of Dahdi Tools.
# dahdi_hardware
pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P
# asterisk -rx "dahdi show version"
DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC
# cat /etc/dahdi/genconf_parameters
...
pri_termtype
SPAN/1 TE
SPAN/2 TE
SPAN/3 NT
SPAN/4 NT
# dahd...
2010 May 10
0
Sometimes called party answers, but callee keep hear ringing, called party hears nothing!
...d dahdi:
asterisk, 1:1.6.2.5-0ubuntu1
dahdi, 1:2.2.1-0ubuntu2
We have 4 ISDN lines, currently 3 lines connected.
Some are connected as bri_cpe (from the former input to a Siemens HiPath 3000), and some as bri_cpe_ptmp.
Span 2 currently not connected.
Span configuration:
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=0,11
context=from-zaptel
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
group=0,12
context=from-zaptel
switchtype = euroisdn
signalling =...
2009 May 26
3
Silly (??) question about chan_dahdi
Hi,
these are my first steps with DAHDI and I finally managed to get
asterisk to load chan_dahdi (after I found out, that I need libpri).
But how do I tell chan_dahdi on which isdn numbers it should react? I
haven't found a parameter like "incomingmsn" for chan_capi in the
documentation.
Thanks for your help,
Stefan
2009 Aug 17
1
Problems with pstn cards
...? output is:
0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
interface
11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01)
And ?dahdi_hardware? output is:
pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F
pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P
but ?dahdi_scan? just recognize the B410P:
[1]
active=yes
alarms=RED
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=Wildcard B410P
location=PCI Bus 17 Slot 01
basechan=1
totchans=3
irq=66
type=digital-TE
syncsrc=...
2008 Nov 12
4
test OpenVox B400P and junghans card for dahdi BRI wcb4xxp
hello:
thanks for Tzafrir Cohen for dahdi testing.
I installed dahdi-2.1-r3c svn code and asterisk1-6
for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board,
i set it as TE mode, but after start wcb4xxp, but
it show the port is NT mode. to detect the TE mode, I modefy the code in base.c
============================================
?static void hfc_init_all_st(struct b4xxp *b4)
?? 1386 {
?? 1387???????? int i, gpio, nt;
?? 1388???????? struct b4xxp_span *s;
?? 1389
?? 1390???????? gpio = b4xxp_ge...
2010 May 27
2
BRI card(B800P) doesn's work with DAHDI(wcb4xxp) in NT mode
Dear Supports,
I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked!
Could you please give me some hints? Thanks in advance!
Here are my environments:
------------------------------
CentOS-5.3
Kernel-2.6.18-164.el5
asterisk-1.6.1.6
dahdi-linux-complete-2.3.0+2.3.0
libpri-1.4.10.2
OpenVox-B800P(the first po...
2009 Nov 10
1
Questions about Dahdi's /etc/dahdi/genconf_parameters
...s unsuccessful with :
group_lines 1
pri_termtype
SPAN/1 TE
SPAN/2 TE
group_lines 2
pri_termtype
SPAN/3 TE
3. After a dahdi_genconf commande, generated
/etc/asterisk/dahdi-channels.conf is like this :
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=5,11
context=remote
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
I can see 2 "group=" and "context=" lines. What is the difference between
them ?
Shall I care to have them both ?...
2011 Apr 07
4
asterisk SIP MESSAGE method support
Hello List,
I have found that asterisk supports only forwards in-dialog MESSAGE method. That is, if the MESSAGE method is sent within an active call.
But according our requirement we need to send MESSAGE method to the other leg without being in a call (general stateless proxy forward). Is it possible to do this in asterisk using some tricks?
Regards,
Rajib Deka
SIEMENS Ltd.
Robert V Chandran
2010 May 09
1
B410P and Patton smartnode : any success ?
...tal_Subscriber_System_No._1, I
would say DSS1 and EuroISDN are the same (but that doesn't mean both
implementations are compliant to each other).
The mostly troubling thing is :
CLI> pri show spans
CLI>
Though with dmesg :
[ 3923.671739] dahdi: Version: SVN-trunk-r7640M
[ 3923.683743] wcb4xxp 0000:01:0a.0: probe called for b4xx...
[ 3923.683743] ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 3923.683743] wcb4xxp 0000:01:0a.0: Identified Wildcard B410P (controller
rev 1) at 0001dff0, IRQ 21
[ 3923.683743] wcb4xxp 0000:01:0a.0: VPM 0/1 init: chip ver 33
[ 392...
2009 Sep 04
1
1.4.26-2, DAHDI-2.2.0, B410P and BRI
...bri_cpe_ptmp is not recognized (for tests, pri_cpe is
loading well, bri_cpe or bri_net gaves also errors)?
In chan_dahdi.conf I have
[...]
switchtype = euroisdn
signalling = bri_cpe_ptmp
;signalling = pri_cpe
channel => 1-2
dahdi_scan give me for port:
[1]
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=Wildcard B410P
location=PCI Bus 00 Slot 12
basechan=1
totchans=3
irq=5
type=digital-TE
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
Asterisk and DAHDI are com...