asterisk users - Feb 2012 - Junghanns QuadBri install help

Hi,

I have a Junghanns QuadBri installed and seems to be detected and working
correctly using the wcb4xxp driver
All ports are configured as TE

The problem is when I connect an ISDN line - the LED turns green and Dahdi
status shows Alarm OK
But when I try to make a call I get "All circuits are busy" cause 27

I have searched and web and tried numerous configs but it doesn't want to
play.
I can accept incoming calls but there is no Audio which would indicate an
issue with the driver wcb4xxp?

See config files below and dahdi commands - please ignore that RED alarms
there was no ISDN lines plugged in.

Thanks, Joe

Here is CLI from a call

[2012-02-03 08:54:25] VERBOSE[13586] app_dial.c: -- Called DAHDI/g0/1901
[2012-02-03 08:54:25] VERBOSE[13586] app_dial.c: -- DAHDI/3-1 is proceeding
passing it to SIP/221-00001c80
[2012-02-03 08:54:27] VERBOSE[24518] chan_dahdi.c: -- Channel 0/3, span 1
got hangup request, cause 27
[2012-02-03 08:54:27] VERBOSE[13586] app_dial.c: -- DAHDI/3-1 is
circuit-busy
[2012-02-03 08:54:27] VERBOSE[13586] chan_dahdi.c: -- Hungup 'DAHDI/3-1'
[2012-02-03 08:54:27] VERBOSE[13586] app_dial.c: == Everyone is
busy/congested at this time (1:0/1/0)

---------------------------------------

Currently Running

Running Asterisk Version = 1.8.8.0
Dahdi Source Version     = 2.6.0+2.6.0
Libpri Source Version    = 1.4.12
Operating System         = CentOS release 6.2 (Final)
Kernel Version           = 2.6.32-220.2.1.el6.i686 - 32 Bit

----------------------------------------

pbx*CLI> dahdi show status
Description                              Alarms  IRQ    bpviol CRC    Fra
Codi Options  LBO
B4XXP (PCI) Card 0 Span 1                RED     0      0      0      CCS
AMI           399-533 feet (DSX-1)
B4XXP (PCI) Card 0 Span 2                RED     0      0      0      CCS
AMI           399-533 feet (DSX-1)
B4XXP (PCI) Card 0 Span 3                RED     0      0      0      CCS
AMI           399-533 feet (DSX-1)
B4XXP (PCI) Card 0 Span 4                RED     0      0      0      CCS
AMI           399-533 feet (DSX-1)

----------------------------------------

pbx*CLI> dahdi show channels
   Chan Extension  Context         Language   MOH Interpret
Blocked    State
 pseudo            default
default                         In Service
      1            from-pstn
default                         In Service
      2            from-pstn
default                         In Service
      4            from-pstn
default                         In Service
      5            from-pstn
default                         In Service
      7            from-pstn
default                         In Service
      8            from-pstn
default                         In Service
     10            from-pstn
default                         In Service
     11            from-pstn
default                         In Service

-----------------------------------------

root at pbx:~ $ dahdi_hardware
pci:0000:06:02.0     wcb4xxp+     1397:08b4 Junghanns QuadBRI ISDN card

------------------------------------------

root at pbx:~ $ dahdi_scan
[1]
active=yes
alarms=RED
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=HFC-4S Junghanns.NET quadBRI PCI
location=PCI Bus 06 Slot 03
basechan=1
totchans=3
irq=78
type=digital-TE
syncsrc=0
lbo=399-533 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
[2]
active=yes
alarms=RED
description=B4XXP (PCI) Card 0 Span 2
name=B4/0/2
manufacturer=Digium
devicetype=HFC-4S Junghanns.NET quadBRI PCI
location=PCI Bus 06 Slot 03
basechan=4
totchans=3
irq=78
type=digital-TE
syncsrc=0
lbo=399-533 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
[3]
active=yes
alarms=RED
description=B4XXP (PCI) Card 0 Span 3
name=B4/0/3
manufacturer=Digium
devicetype=HFC-4S Junghanns.NET quadBRI PCI
location=PCI Bus 06 Slot 03
basechan=7
totchans=3
irq=78
type=digital-TE
syncsrc=0
lbo=399-533 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS
[4]
active=yes
alarms=RED
description=B4XXP (PCI) Card 0 Span 4
name=B4/0/4
manufacturer=Digium
devicetype=HFC-4S Junghanns.NET quadBRI PCI
location=PCI Bus 06 Slot 03
basechan=10
totchans=3
irq=78
type=digital-TE
syncsrc=0
lbo=399-533 feet (DSX-1)
coding_opts=B8ZS,AMI,HDB3
framing_opts=ESF,D4,CCS,CRC4
coding=AMI
framing=CCS

-------------------------------------------------------------

/etc/dahdi/system.conf

loadzone=uk
defaultzone=uk
span=1,1,3,ccs,ami
span=2,2,3,ccs,ami
span=3,3,3,ccs,ami
span=4,4,3,ccs,ami

bchan=1,2
hardhdlc=3

bchan=4,5
hardhdlc=6

bchan=7,8
hardhdlc=9

bchan=10,11
hardhdlc=12

echocanceller=oslec,1,2,4,5,7,8,10,11

----------------------------------------------------------------

/etc/asterisk/dahdi-channels.conf


; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS RED
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63

; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
context = default
group = 63

; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED
group=0,13
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 7-8
context = default
group = 63

; Span 4: B4/0/4 "B4XXP (PCI) Card 0 Span 4" AMI/CCS RED
group=0,14
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 10-11
context = default
group = 63

---------------------------------------

/etc/asterisk/chan_dahdi.conf

[general]

#include chan_dahdi_general.conf

[channels]

; include dahdi groups defined by DAHDI module of FreePBX
#include chan_dahdi_groups.conf

#include dahdi-channels.conf

; include dahdi extensions defined in FreePBX
#include chan_dahdi_additional.conf
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20120203/20dcd366/attachment.htm>

> I have a Junghanns QuadBri installed and seems to be detected and
> working correctly using the wcb4xxp driver
> All ports are configured as TE
> 
> The problem is when I connect an ISDN line - the LED turns green and
> Dahdi status shows Alarm OK
> But when I try to make a call I get "All circuits are busy" cause
27
> 
PRI_CAUSE_DESTINATION_OUT_OF_ORDER		27

The network does not think who you are calling is functional.

Richard

Thanks for that - so its the Telco or ISDN equipment causing the issue?

Here is a pic of the box the ISDN terminates: http://bit.ly/Af6jp6
(There are 3 of these units)

The boxes seem to draw some power from the connection but also accept a
power via a plug.
Maybe I should just plug them into the main power - What do you think?

The ISDN's are in use in an old Toshiba PBX so are 100% functional.
I can call the Telco but not sure what I can ask them to do.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20120203/f4aaa3ea/attachment.htm>