search for: mg2

...0 Span 4 RED 0 0 0 (the 4th span is not live, so that seems like a good output). Another output: /etc/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource 1 PRI Clear (SWEC: MG2) 2 PRI Clear (SWEC: MG2) 3 PRI Clear (SWEC: MG2) 4 PRI Clear (SWEC: MG2) 5 PRI Clear (SWEC: MG2) 6 PRI Clear (SWEC: MG2) 7 PRI Clear (SWEC: MG2) 8 PRI Clear (SWEC: MG2) 9 PRI Cl...

...0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF -------------------------- and this is the proc output asterisk# cat /proc/dahdi/1 Span 1: WCT1/0 "Wildcard TE121 Card 0" (MASTER) B8ZS/ESF RED IRQ misses: 1 1 WCT1/0/1 Clear RED (EC: MG2) 2 WCT1/0/2 Clear RED (EC: MG2) 3 WCT1/0/3 Clear RED (EC: MG2) 4 WCT1/0/4 Clear RED (EC: MG2) 5 WCT1/0/5 Clear RED (EC: MG2) 6 WCT1/0/6 Clear RED (EC: MG2) 7 WCT1/0/7 Clear RED (EC: MG2) 8 WCT1/0/8 Clear RED (EC: MG2)...

# Span 1 span=1,1,0,esf,b8zs bchan=1-23 dchan=24 echocanceller=mg2,1-23 # Span 2 span=2,2,0,esf,b8zs bchan=25-47 dchan=48 echocanceller=mg2,25-47 # Span 3 span=3,3,0,esf,b8zs bchan=49-71 dchan=72 echocanceller=mg2,49-71 # Span 4 span=4,4,0,esf,b8zs bchan=73-95 dchan=96 echocanceller=mg2,73-95 # Global loadzone = us defaultzone = us Span 1: TE2/0/1 &quo...

Hello I just updated the kernel, dahdi-linux and dahdi-tools Im also using now asterisk 1.4.26.1 And im still with a red light (not RED/YELLOW anymore): [root at catumbela ~]# /etc/rc.d/init.d/dahdi status ### Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/ RED 1 PRI CAS RED 2 PRI CAS RED 3 PRI CAS RED 4 PRI

...Generating /etc/asterisk/dahdi-channels.conf --dahdi_cfg -vvv DAHDI Tools Version - 3.1.0 DAHDI Version: 3.1.0 Echo Canceller(s): HWEC Configuration ====================== SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05) Chann...

...cation that have done this a couple times already. Please help. I'm quite frustrated at this point. Thank you in advance for any help. /etc/dahdi/system.conf # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 # Global data loadzone = nl defaultzone = nl /etc/asterisk/chan_dahdi.conf [trunkgroups] [channels] ; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) group=1 context=frompstn switchtype = euroisdn signalling = pri_cpe channel => 1-15,17-31 context = defa...

...searched and searched on the possible problems. If anyone can help me that would be great. Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF CRC4 error count: 4750 E-bit error count: 5023 Timing slips: 72 1 TE2/0/1/1 Clear (In use) (SWEC: MG2) 2 TE2/0/1/2 Clear (In use) (SWEC: MG2) 3 TE2/0/1/3 Clear (In use) (SWEC: MG2) 4 TE2/0/1/4 Clear (In use) (SWEC: MG2) 5 TE2/0/1/5 Clear (In use) (SWEC: MG2) 6 TE2/0/1/6 Clear (In use) (SWEC: MG2) 7 TE2/0/1/7 Clear (In use) (SWEC: MG2...

...oc/dahdi/1 is following (I am afraid from the IRQ misses: 1, so if it is a problem what is the solution)? [root at CC asterisk]# cat /proc/dahdi/1 Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4 RED IRQ misses: 1 1 TE2/0/1/1 Clear (In use) RED(SWEC: MG2) 2 TE2/0/1/2 Clear (In use) RED(SWEC: MG2) 3 TE2/0/1/3 Clear (In use) RED(SWEC: MG2) 4 TE2/0/1/4 Clear (In use) RED(SWEC: MG2) 5 TE2/0/1/5 Clear (In use) RED(SWEC: MG2) 6 TE2/0/1/6 Clear (In use) RED(SWEC: MG2) 7 TE2/0/1/7 Clear (In...

Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXO Kewlstart (Default)...

....32. I am using 2.6.30 kernel and it works fine -- here is the output of dahdi_cfg -vv ++ dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r8670 DAHDI Version: SVN-trunk-r7445M Echo Canceller(s): Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 04: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 04) 2 channels to configure. Changing signalling on channel 1 from Unused to FXO Kewlstart Setting echocan for channel 1 to mg2 Changing signalling on channel 4 from Unused to FXS Kewlstart Setting echocan for channel...

...cturer=Digium devicetype=Wildcard TDM800P location=PCI Bus 04 Slot 02 basechan=1 totchans=8 irq=0 type=analog port=1,FXO port=2,FXO port=3,FXO port=4,FXO port=5,FXS port=6,FXS port=7,FXS port=8,FXS $ sudo dahdi_cfg -vvvvvvv DAHDI Tools Version - 2.7.0.1 DAHDI Version: 2.8.0-rc2 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: FXS Kewlstart (Default)...

...80 ast_module_reload: The module 'chan_dahdi.so' was not properly initialized. Before reloading the module, you must run 'module load chan_dahdi.so' and fix whatever is preventing the module from being initialized. dahdi_cfg -vvv dahdi version: 2.1.0.4 Echo Canceller(s): mg2 Configuration Channel map: channel 01: fxo kewlstart (Default) (Echo Canceler: mg2) (Slaves:01) channel 04: fxs kewlstart (Default) (Echo Canceler: mg2) (Slaves:04) 2 channels to configure. setting echocan for channel 1 to mg2 setting echocan for channel 4 to mg2 sudo...

Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 03) Channel 04: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 04) Channel 05: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 05) Chann...

Hi All, Which echo cancellation is good between OSLEC and MG2. Dahdi by default use MG2 echo cancellation on channel. If i want to use OSLEC then what should i need to do ? Do i need to recompile dahdi with OSLEC ? -S -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-u...

...g 2 Channels - 3 [ 72.510681] rcbfx 1: Starting DMA [ 72.530147] rcbfx 1: Spotted a Rhino: Rhino RCB8FXX (1 modules) root at pbx:/etc/dahdi# Dahdi also sees it: root at pbx:/etc/dahdi# lsdahdi ### Span 1: Rhino RCB8FXX/1 "Rhino RCB8FXX/1" (MASTER) 1 FXS FXOKS (SWEC: MG2) 2 FXS FXOKS (SWEC: MG2) 3 EMPTY 4 EMPTY 5 EMPTY 6 EMPTY 7 EMPTY 8 EMPTY root at pbx:/etc/dahdi# dahdi_cfg -vvv DAHDI Tools Version - 2.2.0 DAHDI Version: 2.2.1-rc2 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlsta...

..."dahdi show channels" from the CLI.. Obviously I need to make it work in a way that will be compatible with asterisknow and the web gui.. Here are the details of my cards.. [root at pbx asterisk]# dahdi_cfg -vv DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: FXO Loopstart (Default) (Echo Canceler: mg2) (Slaves: 02) 2 channels to configure. Setting echocan for channel 1 to mg2 Setting echocan for channel 2 to mg2 [r...

...ions (chan_dahdi.conf) ; ; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended ; to be #include-d by /etc/chan_dahdi.conf that will include the global settings ; ; Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) ;;; line="1 WCTDM/4/0 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 1 callerid= group= context=default ;;; line="2 WCTDM/4/1 FXSKS (SWEC: MG2)" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default ;;; line=&qu...

...* ; * ; This is not intended to be a complete chan_dahdi.conf. Rather, it is * intended * ; to be #include-d by /etc/chan_dahdi.conf that will include the global * settings * ; * * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 1 * callerid= * group= * context=default * * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)" * signalling=fxs_ks * callerid=asreceived * group=0 * context=from-pstn * channel => 2 *...

As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;