search for: coding_opts

Displaying 20 results from an estimated 27 matches for "coding_opts".

Did you mean: bonding_opts
2012 Dec 21
2
dahdi timing source multiple cards
...dahdi_scan : [1] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 1 name=TE4/0/1 manufacturer=Digium devicetype=Wildcard TE410P (3rd Gen) (VPMOCT128) location=Board ID Switch 0 basechan=1 totchans=24 irq=225 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 2 name=TE4/0/2 manufacturer=Digium devicetype=Wildcard TE410P (3rd Gen) (VPMOCT128) location=Board ID Switch 0 basechan=25 totchans=24 irq=225 type=digital-T1 syncsrc=1...
2009 Apr 02
2
Dahdi, TE220 Device, and Asterisk Problem
...kernel, as demonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=32 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-...
2009 Aug 17
1
Problems with pstn cards
...but ?dahdi_scan? just recognize the B410P: [1] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (C...
2009 Aug 04
1
dahdi_scan doesn't recognize an OpenVox A400E
...OK ] The dahdi_scan result is the following: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=1 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 17 Slot 01 basechan=4 totchans=3 irq=66 type=digital-TE syncsrc=0 lbo=0 db (CS...
2012 Feb 03
2
Junghanns QuadBri install help
...----------------------- root at pbx:~ $ dahdi_scan [1] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=HFC-4S Junghanns.NET quadBRI PCI location=PCI Bus 06 Slot 03 basechan=1 totchans=3 irq=78 type=digital-TE syncsrc=0 lbo=399-533 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS [2] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 2 name=B4/0/2 manufacturer=Digium devicetype=HFC-4S Junghanns.NET quadBRI PCI location=PCI Bus 06 Slot 03 basechan=4 totchans=3 irq=78 type=digital-TE syncsrc=0 lbo=399-53...
2009 May 19
2
Unable to make outbound calls
...e. Some details below: geriatrix ~ # dahdi_scan [1] active=yes alarms=OK description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE210P (4th Gen) location=Board ID Switch 0 basechan=1 totchans=24 irq=48 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE210P (4th Gen) location=Board ID Switch 0 basechan=25 totchans=24 irq=48 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (D...
2012 Aug 10
0
chan_dahdi.c: No D-channels available! Using Primary channel 16 as D-channel anyway!
...as D-channel anyway! gentoo1 ~ # dahdi_scan [1] active=yes alarms=LMFA/OK description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (5th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS/CRC4 [2] active=yes alarms=LMFA/OK description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE220 (5th Gen) location=Board ID Switch 0 basechan=32 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-1...
2010 May 31
0
Dahdi PRI T1 Setup for TE210P
...ear RED 24 TE2/0/1/24 HDLCFCS RED 5. dahdi_scan [1] active=yes alarms=BLU/RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE210P location=Board ID Switch 0 basechan=1 totchans=24 irq=22 type=digital-T1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE210P location=Board ID Switch 0 basechan=25 totchans=24 irq=22 type=digital-T1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) codi...
2009 Dec 03
2
dahdi_tool shows no alarms, but no line connected
...FT TE1 | N/A | Disconnected | wanpipe4 | AFT TE1 | N/A | Disconnected | However: # dahdi_scan 2 [2] active=yes alarms=OK description=wanpipe2 card 1 name=WPE1/1 manufacturer= devicetype= location= basechan=1 totchans=31 irq=0 type=digital- syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Why are the dahdi tools not reflecting the values by wanrouter? Roger.
2010 May 08
1
JNET's qozap, dahdi and PCI-E Quad
...DAHDI Version: 2.3.0 Echo Canceller: KB1 Each LED is green but dahdi_scan says : # dahdi_scan [1] active=yes alarms=OK description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca name=ztqoz/1/1 manufacturer= devicetype= location= basechan=1 totchans=3 irq=0 type=digital- syncsrc=0 lbo=399-533 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding=AMI framing=CCS 1. Is this syncsrc=0 normal (we're in TE mode) ? 2. Am I correct to hope "pri show spans" to display something ? 3. Suggestions ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium....
2011 Aug 03
1
TE410P hardware problems
...me problem. dahdi_scan [9] active=yes alarms=RED/LFA/LMFA description=T4XXP (PCI) Card 2 Span 1 name=TE4/2/1 manufacturer=Digium devicetype=Wildcard TE410P (4th Gen) (VPMOCT128) location=PCI Bus 10 Slot 04 basechan=193 totchans=24 irq=50 type=digital-T1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF [10] active=yes alarms=RED/LFA/LMFA description=T4XXP (PCI) Card 2 Span 2 name=TE4/2/2 manufacturer=Digium devicetype=Wildcard TE410P (4th Gen) (VPMOCT128) location=PCI Bus 10 Slot 04 basechan=217 totchans=24 irq=50 type=digital-T1 syncsrc=0 lbo...
2010 Jul 06
0
Problem with wct4xxp - cannot make calls
...rc=0 for all spans. Is that correct? [1] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 1 name=TE4/0/1 manufacturer=Digium devicetype=Wildcard TE420 (4th Gen) (VPMOCT128) location=Board ID Switch 0 basechan=1 totchans=31 irq=177 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS [2] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 2 name=TE4/0/2 manufacturer=Digium devicetype=Wildcard TE420 (4th Gen) (VPMOCT128) location=Board ID Switch 0 basechan=32 totchans=31 irq=177 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-13...
2010 Sep 29
4
Use modprobe to find E1/T1 jumper setting on PRI card
Does anyone know if I could use modprobe command to find out rather than set the jumper on a Digium PRI card? I want to find out the jumper settings on the card without opening the box which will cause down time. Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL:
2011 Feb 05
11
Callback through extensions.conf?
Hello I'd like to configure Asterisk so that... 1. I ring it from my cellphone with CID number displayed, just to notify Asterisk that I wish to make a call 2. Asterisk waits until I hang up, calls me back, and prompts me for the number I wish to call 3. Asterisk puts me on hold through Flash(), which is apparently the equivalent of hitting the R key on European handsets 4. Asterisk calls the
2009 Sep 04
1
1.4.26-2, DAHDI-2.2.0, B410P and BRI
...ng = pri_cpe channel => 1-2 dahdi_scan give me for port: [1] active=yes alarms=OK description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium devicetype=Wildcard B410P location=PCI Bus 00 Slot 12 basechan=1 totchans=3 irq=5 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI,HDB3 framing_opts=ESF,D4,CCS,CRC4 coding=AMI framing=CCS Asterisk and DAHDI are compiled with libpri as: # strings /usr/lib/asterisk/modules/chan_dahdi.so|grep 'DAHDI Tele' DAHDI Telephony Driver w/PRI DAHDI Telephony w/PRI I took a look in chan_dahdi.c and found nowhere info co...
2009 Sep 28
1
TE121P Blue Alarm/Recovering
Hi All, I have a TE121P card installed and since connected it to the PRI I keep getting the Current Alarm as continually changing from Blue Alarm/Recovering and Recovering. The config I have is: /etc/dahdi/system.conf bchan=1-15,17-31 dchan=16 echocanceller=mg2,1-15,17-31 loadzone = cn defaultzone = cn /etc/asterisk/chan_dahdi.cfg [channels] Context=telco
2010 Oct 20
1
echo on TE122
...:04:00.0 wcte12xp+ d161:8001 Wildcard TE122 # dahdi_scan [1] active=yes alarms=OK description=Wildcard TE122 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE122 location=PCI Bus 04 Slot 01 basechan=1 totchans=31 irq=20 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS chan_dahdi.conf contains: echocancel=yes echocancelwhenbridged=yes echotraining=800
2010 Nov 10
1
MFC/R2 detected as ISDN PRI
...Here goes some info about what I have: # dahdi_scan [1] active=yes alarms=OK description=Wildcard TE121 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE121 (VPMADT032) location=PCI Bus 37 Slot 09 basechan=1 totchans=31 irq=32 type=digital-E1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI,HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS Asterisk version: 1.8.0 Dahdi version: dahdi-linux-complete-2.4.0+2.4.0 libpri version: libpri-1.4.11.4 openr2 version: openr2-1.2.0 My location: Argentina Again, if you have any tip, I'll really thank you it. I've been scratching m...
2010 Nov 27
1
DAHDI 2.4.0 produces HDLC errors with echo canceler
...refer not having to run with the echo canceler off of course... [1] active=yes alarms=OK description=Wildcard TE122 Card 0 name=WCT1/0 manufacturer=Digium devicetype=Wildcard TE122 location=PCI Bus 03 Slot 03 basechan=1 totchans=24 irq=35 type=digital-T1 syncsrc=1 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=B8ZS,AMI framing_opts=ESF,D4 coding=B8ZS framing=ESF Thanks. -- James
2014 Sep 29
1
Dahdi problem with dahdi_genconf
...ns.pm line 40. Here is my dahdi_scan: [1] active=yes alarms=UNCONFIGURED description=HFC-S PCI A ISDN card 0 [TE] name=ZTHFC1 manufacturer=Cologne Chips devicetype=HFC-S PCI-A ISDN location=PCI Bus 01 Slot 10 basechan=1 totchans=3 irq=18 type=digital-TE syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=AMI framing_opts=CCS coding= framing=CAS dahdi_hardware pci:0000:01:09.0 zaphfc+ 1397:2bd0 HFC-S ISDN BRI card lsmod zaphfc 22268 0 dahdi 204045 1 zaphfc .... DAHDI Version: 2.5.0.1 Echo Canceller: HWEC Obviously in asterisk, there is no channel config...