search for: dahdi_hardwar

I just installed a TE820 octal span T1 card, and it's not showing up in dahdi_hardware output. This was installed into a test machine that already has a TDM800P card in it, and that one is showing up and working fine. Is there some kernel module that I'm missing? Lspci: 05:04.0 Ethernet controller: Digium, Inc. Wildcard TDM800P 8-port analog card (rev 11) 21:08.0 Communicati...

...robe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication controller: Digium, Inc. Device 0220 (rev 02) dahdi_hardware also: astpbx ~ # dahdi_hardware pci:0000:03:08.0 wct4xxp+ d161:0220 Wildcard TE220 (4th Gen) astpbx ~ # But dahdi_tool does not show the card and dahdi_cfg gives DAHDI_SPANCONFIG failed on span 1: Invalid argument (22) System info is provided here - http://asteriskpbx.ru/pastebin/12 Please...

lspci | grep Digium 03:05.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1 card (rev 11) dahdi_scan So I have a card in a box - lspci shows it... dahdi_scan reports nothing. Is my card dead? Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL:

...400P I get: # modprobe dahdi # modprobe wctdm # dahdi_genconf Empty configuration -- no spans Empty configuration -- no spans # dahdi_cfg -vvv DAHDI Tools Version - 2.4.1 DAHDI Version: 2.4.1.2 Echo Canceller(s): Configuration ====================== Channel map: 0 channels to configure. # dahdi_hardware driver should be 'wctdm' but is actually 'netjet' pci:0000:01:09.0 wctdm+ e159:0001 Wildcard TDM400P REV E/F Where am I going wrong? Why is dahdi_genconf not seeing the card, when dahdi_hardware does see it? I've tried "modprobe netjet", but makes no di...

...tency 16, IRQ 5 I/O ports at c400 [size=8] Memory at fdefd000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 I think i need the zaphfc module to make it work, but it is not included into the dahdi package, and i cant find it. The command dahdi_hardware says this: dahdi_hardware pci:0000:01:09.0 zaphfc- 1397:2bd0 HFC-S ISDN BRI card But, how i can install the zaphfc module? Thanks in advance to all. Claudio.

...everybody, In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize the OpenVox. This card was working correctly but suddenly stopped working and I cannot make it work again. Both ?lspci? and ?dahdi_hardware? detect it but ?dahdi_scan? not and I cannot use it. >lsppci: *0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface* 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) > dahdi_hardware: pci:0000:0a:00.0 wctdm- e159:0001 W...

...e [1397:b562] Flags: medium devsel, IRQ 21 I/O ports at 9480 [size=8] Memory at fb9bb000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Kernel driver in use: wcb4xxp Kernel modules: wcb4xxp, hfcmulti bishop dahdi # dahdi_hardware -v driver should be 'qozap' but is actually 'wcb4xxp' pci:0000:01:00.0 qozap+ 1397:16b8 Junghanns OctoBRI ISDN card Completely confused: Clairet

Hi, In my 1.6.1.18 with dahdi 2.2.1.1, I've got : # dahdi_hardware pci:0000:01:0a.0 qozap- 1397:16b8 Junghanns OctoBRI ISDN card Does it mean I should download and use qozap or is it a bug in Dahdi ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/2010...

...tn default In Service pbx*CLI> dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Xorcom XPD #00/00: FXO OK 0 0 0 CAS Unk YEL 0 db (CSU)/0-133 feet (DSX-1) pbx*CLI> dahdi show regdump 1 Unable to get registers on channel 1 Unable to get stats on channel 1 [Trixbox]# dahdi_hardware -v /usr/sbin/dahdi_hardware: warning - OLD DRIVER: missing '/sys/bus/xpds/devices/00:0:0/timing_priority'. Fall back to /proc usb:002/002 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1044207] CONNECTOR=@usb-0000:00:1d.7-4 XBUS-00/XPD-00: FXO (8) Span 1 DAHDI-SYNC Note:...

...con asterisk, asi que descague compile e instale lo siguiente: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 Sin embargo no logro configurar la tarjeta con exito, ya probe casi? todo. Esto aparece si ejecuto lspci: 04:06.0 Communication controller: Motorola Wildcard X100P dahdi_hardware me muestra: pci:0000:04:06.0???? wcfxo-?????? 1057:5608 Wildcard X100P dahdi_cfg -v : DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): Configuration ====================== 0 channels to configure. dahdi_scan: [1] active=yes alarms=UNCONFIGURED description=DAHDI_DUMMY/1...

...d, and an OpenVox A400E. The issue is that it?s impossible to make the system recognize the A400E, despite the ?lspci? output is: 0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) And ?dahdi_hardware? output is: pci:0000:0a:00.0 wctdm- e159:0001 Wildcard TDM400P REV E/F pci:0000:11:00.0 wcb4xxp+ d161:b410 Digium Wildcard B410P but ?dahdi_scan? just recognize the B410P: [1] active=yes alarms=RED description=B4XXP (PCI) Card 0 Span 1 name=B4/0/1 manufacturer=Digium...

...RQ bpviol CRC4 Fra Codi Options LBO T2XXP (PCI) Card 0 Span 1 OK 1 0 2938622 ESF B8ZS 0 db (CSU)/0-133 feet (DSX-1) I am leaning towards a misconfiguration on the span on the switch side but here is my setup. Can anyone point me in the right direction? # dahdi_hardware pci:0000:06:08.0 wct4xxp+ d161:1220 Wildcard TE220 (5th Gen) /etc/dahdi/system.conf # Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF ClockSource span=1,1,0,esf,b8zs # termtype: unknown bchan=1-23 dchan=24 echocanceller=mg2,1-23 /etc/asterisk/chan_dahdi [channels]...

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00: FXS (14) Span 2 XBUS-00/XPD-10: FXS (8) Span 3 XBUS-00/XPD-20: FXS (8) Span 4...

...e IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [ 3821.982938] Do you have a strange power saving mode enabled? kernel: [ 3821.982964] Dazed and confused, but trying to continue dahdi_hardware pci:0000:04:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen) pci:0000:06:08.0 wct4xxp+ d161:0420 Wildcard TE420 (4th Gen) pci:0000:08:02.0 wct4xxp+ d161:0410 Wildcard TE410P (3rd Gen) -------------- next part -------------- An HTML attachment was scrubbed... URL: http:...

...ure a x100p card an use it with asterisk, so i download, compile and install: asterisk-1.4.24 dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.9 i try almost everything i found on the net but without success: if i run lspci: 04:06.0 Communication controller: Motorola Wildcard X100P when i run dahdi_hardware appears this: pci:0000:04:06.0 wcfxo- 1057:5608 Wildcard X100P if i run dahdi_cfg -v : DAHDI Tools Version - 2.1.0.2 DAHDI Version: 2.1.0.4 Echo Canceller(s): Configuration ====================== 0 channels to configure. when i run dahdi_scan: [1] active=yes alarms=UNCONFIGURED desc...

..., I have a Sangoma A200 analog card with 2 FXO ports. It's working well with asterisk 1.4.22 and Zaptel. I decided to upgrade to asterisk 1.6/dahdi. I compiled and installed, dahdi-linux-2.1.0.4 dahdi-tools-2.1.0.2 libpri-1.4.10 wanpipe-3.4.1 asterisk 1.6.1.1 My analog card is recognized in dahdi_hardware. However, asterisk cannot compile chan_dahdi.so. I've tried passing --with-dahdi to dahdi-linux-2.1.0.4 and dahdi-tools-2.1.0.2 src yet no luck. I tried passing --with-dahdi to dahdi-tools install dir yet no luck. What is the magic to compile chan_dahdi.so in asterisk 1.6.1.x? I'm on cen...

Hi, I'm using revision 6822 of Dahdi Tools. # dahdi_hardware pci:0000:05:06.0 wcb4xxp+ d161:b410 Digium Wildcard B410P # asterisk -rx "dahdi show version" DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC # cat /etc/dahdi/genconf_parameters ... pri_termtype SPAN/1 TE SPAN/2 TE SPAN/3 NT...

Hi, I have a X101P card and am running Asterisk SVN-trunk-r226890. The X101P card seems to be identified properly: debian:/usr/src/dahdi-tools# dahdi_hardware pci:0000:01:01.0 wcfxo+ e159:0001 Wildcard X101P debian:/usr/src/dahdi-tools# dahdi_cfg -vv DAHDI Tools Version - SVN-trunk-r7409 DAHDI Version: SVN-trunk-r7445 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Cancele...

...ing from the Ubuntu 'dahdi', 'dahdi-dkms', and 'dahdi-linux' packages, versions 1:2.7.0-1ubuntu1, 1:2.5.0.1+dfsg-1ubuntu3, and 1:2.5.0.1+dfsg-1ubuntu3, respectively. These package versions are identical on both machines. On the new machine, the T1 card shows up in lspci and dahdi_hardware, and the tor2 driver appears to load successfully, but none of the other DAHDI tools appear to "see" any of the 4 T1 spans on the card. Here is the 'lspci -vvv' output relevant to the card on the non-working server: https://gist.github.com/DrDeke/9436688 Here is the output...

Hello, I am trying to install my E1 card to make a conection with an Ericsson MD-110 PBX. I installed dahdi drivers as: dahdi_hardware pci:0000:04:08.0 wcte12xp- d161:8000 Wildcard TE121 ran dahdi_genconf and it created all my e1 ports. On the other side i also configured the pbx to communicate with TE121. On ericsson side, i have no error messages. On asterisk side, no error messages. But when i try to create a dahdi trun...