search for: a400

Hello, I'm preparing a setup before installing it within the next few days. In this setup, I'm using a SPA112 as an ATA for an analog phone. The target phone is a Gigaset A400 DECT handset. In my lab, I've got another A400 handset and an old Matracom 46 handset. When I connect my Matracom 46 handset to my SPA112, I can send and receive calls. When I connect my A400 handset to the same SPA112 port, I can receive calls (from SIP to analog) but cannot send (from analo...

I'm a long time user of Digium carts and stupid me i wanted to give Sangoma a try. We got Sangoma A400 with 6 FXO ports. Asterisk version: 1.4.35 Zaptel version: 1.4.11 Wanpipe version: 3.5.11 we tried to use fxtune but looks like it wont work with Sangoma card, ( please correct me if i'm wrong) Echo is really bad and also we have background noise on all lines. We tried both mg2 and oslec ech...

Hi everybody, In an Asterisk 1.6.0.5, dahdi-linux-2.1.0.4, dahdi-tools-2.1.0.2, with a Digium B410P and an OpenVox A400E, I can't make "dahdi_scan" to recognize the OpenVox. This card was working correctly but suddenly stopped working and I cannot make it work again. Both ?lspci? and ?dahdi_hardware? detect it but ?dahdi_scan? not and I cannot use it. >lsppci: *0a:00.0 Network controller: Tiger...

I'm having (I think) timing issues in relation to bridged T1-T1 calls via dynamic spans. Fax calls are intermittently working, but voice is fine. My box has a Sangoma A400 inside it as the primary Zaptel timing source. My T1 PRIs that are hooked to the box come in via a foneBRIDGE2 (dynamic TDMoE spans). PRI #1 is the telco and PRI #2 is an existing Comdial FX-II. For some reason, bridged TDM calls (when it comes to faxing) must be having timing issues since they int...

...4,0005,0006,0007 Boot0000* Windows Boot Manager HD(1,GPT,a6b87338-9b9c-4a50-8fde-2447e8fdebb6,0x800,0xfa000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}.................... Boot0001* UEFI: A400 NVMe SanDisk 512GB, Partition 1 HD(1,GPT,a6b87338-9b9c-4a50-8fde-2447e8fdebb6,0x800,0xfa000)/File(EFI\Microsoft\Boot\bootmgfw.efi)..BO Boot0002* Diskette Drive BBS(Floppy,Diskette Drive,0x0)..BO Boot0003* M.2 PCIe SSD BBS(HD,P0: A400 NVMe SanDisk 512GB,0x0)..BO Boot0004* USB Storage Devi...

Hi everybody, I have a 1.6.0.5 asterisk system and I?m having many problems with my pstn cards. This system has a Digium B410P with 4 BRIs configured, and an OpenVox A400E. The issue is that it?s impossible to make the system recognize the A400E, despite the ?lspci? output is: 0a:00.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 11:00.0 ISDN controller: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) And ?dahdi_hardware? output...

Hi list, I've just compiled and installed Asterisk 1.4.16 and when I try to run "zap show" I get the message "*No such command 'zap show'*". I have a Sangoma Remora A400D with 2 FXS / 10 FXO ports, I've installed the latest wanpipe too. zaptel-1.4.7.1 was compiled from the wanpipe installation, so I don't know what's happening here!!! Any ideas??? Thanks in advance!! Note: Below are my zapata.conf and zaptel.conf files ############ BEGIN ZAPATA.CO...

Is there any option in Asterisk distribution of this? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120531/8fac6a22/attachment.htm>

...waitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no answeronpolarityswitch=yes I use asterisk 1.6.2 and sangoma a400 fxo ports. Then i try call i get chan_dahdi.c: Ignore possible polarity reversal on line seizure

...Power, LAN - NEW Cabling in main Office building, Hodge Podge of DYI wiring across remaining buildings. Phones - Total of about 50 extensions. Only about 25 - 30 phones will be IP phones, 20-30 more will have to be analog due to the distance. Analog Extensions will be on Digium TDM2400 or Sangoma A400 Cards. Analog extensions WILL Hit a Surge Gate before the cards, and as much precaution on grounding protection and power protection is being taken as possible. The cards WILL BE PCI not PCI-e (They are being donated) A New Dell Power-edge Server will be acquired for the PBX HERE IS MY QUESTION....

...sMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 16 (4000ns max) Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at a400 [disabled] [size=8] Region 1: Memory at f4004000 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 1 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME...

...ot;modprobe b1pci" I did "capiinit" and capiinit moaned about a missing t1.b4. So I search the web and found one at http://www.avm.de/ftp/cardware/b1/x_misc/ddi/. When I now look at the controller, I finally see p2p-mode: # cat /proc/capi/controllers/1 name b1pciv4-a400 io 0xa400 irq 5 membase 0xf1800000 type B1 PCI ver_driver 3.09-10 ver_cardtype B1 ver_serial 39032287 protocol DSS1 linetype point to point cardname B1 csr (cached) 0x30004000 csr 0x...

...2 Pentium III 1GHz CPUs (Coppermine FSB 133MHz 256K L2 Cache), 768MB PC-133 ECC RAM, 3 UltraSCSI LVD2 18.2GB 10K RPM HDD in RAID5, 100Mb NIC for server. This Server will support 35 SIP phones (users) and 10 FXO ports (for telco lines) and 2 FXS ports (internal analog phones) with a Sangoma Remora A400 PCI card. What do you think? is this hardware enough for this setup??? Thanks in advance for your opinions, Raul -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071010/d27a8e59/attachment.htm

...DR, so they are not properly accounted (for billing), neither transferred to internals extensions. How can I solve this??? Is this a incompatibility issue between technologies??? Or just a config that I haven't made right??? Thanks in advance... My Setup: - Asterisk 1.4.17 - Sangoma Remora A400D HEC PCI Card (2 FXS / 10 FXO) - Wanpipe 3.2.1 - Zaptel 1.4.7.1 - Grandstream GXP-2000 Phones ================================================================= *zaptel.conf* *# Autogenerated by /usr/local/sbin/sangoma/setup-sangoma -- do not hand edit # Zaptel Channels Configurations (zaptel.conf...

I have a Sangoma A400 card with two FXS ports. They work fine, however as I have analog phones connected, I have no way of telling the phone I am done dialing. Pressing # works fine, but then Asterisk passes that # over to the POTS line, and about every 5th call, for some reason that is causing the call on the P...

...either transferred to > internals extensions. > > How can I solve this??? Is this a incompatibility issue between > technologies??? Or just a config that I haven't made right??? > > Thanks in advance... > > > My Setup: > > - Asterisk 1.4.17 > - Sangoma Remora A400D HEC PCI Card (2 FXS / 10 FXO) > - Wanpipe 3.2.1 > - Zaptel *MailScanner warning: numerical links are often malicious:* > 1.4.7.1 <http://1.4.7.1/> > - Grandstream GXP-2000 Phones > > > ================================================================= > *zaptel.conf* &...

...k about this trouble they has no clue at all of what I'm talking about. That's why I'm looking for others method so solve this issues, any ideas??? Is my approach right?? Or there's something else I should try first??? *My setup:* Asterisk 1.4.17 Zaptel 1.4.7.1 Sangoma Remora Card A400D with EC (2 FXS / 10 FXO) Wanpipe 3.2.1 Grandstream GXP-2000 / GXP-2020 IP Phones Thanks a lot for any help... PD: This is a production system, so I can test some things but with less flexibility than with a test system, maybe after hours... *My config files:* *zapata.conf:* ;autogenerated b...

...6,0007 > Boot0000* Windows Boot Manager HD(1,GPT,a6b87338-9b9c-4a50-8fde-2447e8fdebb6,0x800,0xfa000)/File(\EFI\Microsoft\Boot\bootmgfw.efi)WINDOWS.........x...B.C.D.O.B.J.E.C.T.=.{.9.d.e.a.8.6.2.c.-.5.c.d.d.-.4.e.7.0.-.a.c.c.1.-.f.3.2.b.3.4.4.d.4.7.9.5.}.................... > Boot0001* UEFI: A400 NVMe SanDisk 512GB, Partition 1 HD(1,GPT,a6b87338-9b9c-4a50-8fde-2447e8fdebb6,0x800,0xfa000)/File(EFI\Microsoft\Boot\bootmgfw.efi)..BO > Boot0002* Diskette Drive BBS(Floppy,Diskette Drive,0x0)..BO > Boot0003* M.2 PCIe SSD BBS(HD,P0: A400 NVMe SanDisk 512GB,0x0)..BO > Boot0004* U...

...tion 82576 Gigabit Network Connection (rev 01) Subsystem: Super Micro Computer Inc Device 10c9 Flags: bus master, fast devsel, latency 0, IRQ 41 Memory at dfc20000 (32-bit, non-prefetchable) [size=128K] Memory at dfc00000 (32-bit, non-prefetchable) [size=128K] I/O ports at a400 [size=32] Memory at dfbdc000 (32-bit, non-prefetchable) [size=16K] Expansion ROM at dfbe0000 [disabled] [size=128K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [70] MSI-X: Enable+ Count=10 Masked-...

Hi is it any tool like show.pl by Stef Coene to generate graph with classes but for HTB regards emil _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/