Uwe Sauter
2017-Jul-14 11:40 UTC
[Nut-upsdev] UPSC dump for Eaton/Powerware 5115 Rackmount unit (driver version 2.7.2)
Hi, just wanted to provide a upsc dump for an Eaton/Powerware 5115 rack mount unit. This was on a CentOS 7.3 machine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton device.model: PW5115 RM 1500i device.part: XXXXXXXXX-XXXX device.serial: XXXXXXXXXX device.type: ups driver.name: bcmxcp_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.7.2 driver.version.internal: 0.28 input.frequency: 50.00 input.frequency.high: 55 input.frequency.low: 45 input.frequency.nominal: 50 input.transfer.boost.high: 207 input.transfer.high: 266 input.transfer.low: 194 input.transfer.trim.low: 243 input.voltage: 239 input.voltage.nominal: 230 outlet.1.delay.shutdown: -1 outlet.1.delay.start: 3 outlet.1.id: 1 outlet.1.status: On outlet.2.delay.shutdown: -1 outlet.2.delay.start: 13 outlet.2.id: 2 outlet.2.status: On output.current: 0.0 output.current.nominal: 6.4 output.frequency: 50.00 output.frequency.nominal: 50 output.phases: 1 output.voltage: 239 output.voltage.nominal: 230 ups.beeper.status: enabled ups.description: Line-Interactive UPS, Single Phase ups.firmware: Cont:01.20 Inve:01.02 ups.load: 0.2 ups.mfr: Eaton ups.model: PW5115 RM 1500i ups.power: 3 ups.power.nominal: 1500 ups.realpower: 0 ups.serial: XXXXXXXXXX ups.status: OL ups.test.result: Done and passed $ upscmd -u root eaton5115 test.battery.start Password: OK Regards, Uwe