Nut upsuser - Sep 2007 - Poweraware 5115, ttyS0, Ubuntu 6.06.1

Hi all,

I know there are some howto's about Powerware 5115 and Ubuntu, but I
can't
still get that thing working.

Can someone give some light...

1. Powerware 5115, serial port (ttyS0)

2. Ubuntu 6.06.1 as LTSP-server

As reference:

http://gentoo-wiki.com/HOWTO_NUT
http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/

---

a. I try to start driver as root.

root at kirkonmaki:/home/juuri# upsdrvctl -u root start
Network UPS Tools - UPS driver controller 2.0.3
Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)

Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS lost: Error executing command
Communications with UPS re-established
Connected to UPS on /dev/ttyS0 baudrate: 9600
Model = PW5115 750i         750VA
Firmware = 01.00
Shutdown delay =  120 seconds

b. I try to start upsd as root.

root at kirkonmaki:/home/juuri# upsd
Network UPS Tools upsd 2.0.3
/etc/nut/upsd.conf is world readable
Can't connect to UPS [powerware] (bcmxcp-ttyS0): Permission denied
/etc/nut/upsd.users is world readable
Synchronizing........ giving up
root at kirkonmaki:/home/juuri#

c. I got user monuser in group dialout (ttyS0)

root at kirkonmaki:/home/juuri# ls -al /dev/ttyS0
crw-rw---- 1 root dialout 4, 64 2007-09-21 10:43 /dev/ttyS0
root at kirkonmaki:/home/juuri#

root at kirkonmaki:/home/juuri# cat /etc/group | grep nut
nut:x:115:monuser
root at kirkonmaki:/home/juuri#

root at kirkonmaki:/home/juuri# cat /etc/group | grep dialout
dialout:x:20:[removed],monuser
root at kirkonmaki:/home/juuri#

---

Conf-files for nut.

a. ups.conf

[powerware]
driver = bcmxcp
port = /dev/ttyS0

b. upsd.conf

ACL all 0.0.0.0/0
ACL localhost 127.0.0.1/32

ACCEPT localhost
REJECT all

c. upsd.users

[monuser]
password  = usermon
allowfrom = localhost
upsmon master

d. upsmon.conf

[clip]
MONITOR powerware at localhost 1 monuser usermon master
SHUTDOWNCMD "/sbin/shutdown -h +0"
[more clip]

Best regards Asmo Koskinen.

> Hi all,
>
> I know there are some howto's about Powerware 5115 and Ubuntu, but I
can't
> still get that thing working.
>
> Can someone give some light...
>
> 1. Powerware 5115, serial port (ttyS0)
>
> 2. Ubuntu 6.06.1 as LTSP-server
>
> As reference:
>
> http://gentoo-wiki.com/HOWTO_NUT
> http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/
>
> ---
>
> a. I try to start driver as root.
>
> root at kirkonmaki:/home/juuri# upsdrvctl -u root start
You probably want to change this to

    upsdrvctl -u nut start
> Network UPS Tools - UPS driver controller 2.0.3
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS re-established
> Connected to UPS on /dev/ttyS0 baudrate: 9600
> Model = PW5115 750i         750VA
> Firmware = 01.00
> Shutdown delay =  120 seconds
>
> b. I try to start upsd as root.
>
> root at kirkonmaki:/home/juuri# upsd
This will start the server with whatever user was compiled in. If you
really want to start the server as root, you need to specify that on the
commandline:

    upsd -u root
> Network UPS Tools upsd 2.0.3
> /etc/nut/upsd.conf is world readable
That is bad. Fix it.
> Can't connect to UPS [powerware] (bcmxcp-ttyS0): Permission denied
> /etc/nut/upsd.users is world readable
> Synchronizing........ giving up
> root at kirkonmaki:/home/juuri#
>
> c. I got user monuser in group dialout (ttyS0)
>
> root at kirkonmaki:/home/juuri# ls -al /dev/ttyS0
> crw-rw---- 1 root dialout 4, 64 2007-09-21 10:43 /dev/ttyS0
> root at kirkonmaki:/home/juuri#
>
> root at kirkonmaki:/home/juuri# cat /etc/group | grep nut
> nut:x:115:monuser
> root at kirkonmaki:/home/juuri#
>
> root at kirkonmaki:/home/juuri# cat /etc/group | grep dialout
> dialout:x:20:[removed],monuser
> root at kirkonmaki:/home/juuri#
>
> ---
>
> Conf-files for nut.
>
> a. ups.conf
>
> [powerware]
> driver = bcmxcp
> port = /dev/ttyS0
>
> b. upsd.conf
>
> ACL all 0.0.0.0/0
> ACL localhost 127.0.0.1/32
>
> ACCEPT localhost
> REJECT all
>
> c. upsd.users
>
> [monuser]
> password  = usermon
> allowfrom = localhost
> upsmon master
>
> d. upsmon.conf
>
> [clip]
> MONITOR powerware at localhost 1 monuser usermon master
> SHUTDOWNCMD "/sbin/shutdown -h +0"
> [more clip]
>
> Best regards Asmo Koskinen.
Best regards, Arjen
-- 
Eindhoven - The Netherlands
Key fingerprint - 66 4E 03 2C 9D B5 CB 9B  7A FE 7E C1 EE 88 BC 57

Den Friday 21 September 2007 10.28.21 skrev asmo.koskinen at
arkki.info:
> Hi all,
>
Hi Asmo,
> root at kirkonmaki:/home/juuri# upsdrvctl -u root start
> Network UPS Tools - UPS driver controller 2.0.3
> Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.3)
>
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS lost: Error executing command
> Communications with UPS re-established
> Connected to UPS on /dev/ttyS0 baudrate: 9600
> Model = PW5115 750i         750VA
> Firmware = 01.00
> Shutdown delay =  120 seconds
>
To remove this startup error's, enter the baud_rate into the
ups.conf
> a. ups.conf
>
> [powerware]
> driver = bcmxcp
> port = /dev/ttyS0
baud_rate = 9600

Then it connect directly on 9600 bps.

Regards
Kjell