search for: 1500i

...though it was supposed to wait for a higher charge? Nevertheless, the UPS reported a charge of 58% when the machine restarted, I expected about 20%. Free energy? Q1) Does this last exercise indicate a bad battery that woke up on the second restart? Or a failed UPS? The UPS is a Eaton 5E1500i. It is only 6m old and within the warranty period. Q2) What is the parameter I need to set on the UPS for a minimum charge before restarting power? $ upsc eaton Init SSL without certificate database battery.charge: 68 battery.runtime: 1290 battery.type: PbAc device.mfr: EATON device.model: 5E 150...

Hello, Just baught this ups to replace an Ellipse. I've had a look at the nut hardware compatibility list, it's fully compatible and uses the same driver as ellipse (usbhid-ups) Here is the error I get when I "/usr/bin/upsdrvctl start" : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned

...guidance for trying this branch. FYI, I've just made a test with the same unit, on a Debian jessie (kernel 3.16.43-2, libusb 0.1.12-25) both with 2.7.4 and the latest git master, and it works fine: battery.charge: 62 battery.runtime: 2725 battery.type: PbAc device.mfr: EATON device.model: 5E 1500i device.type: ups driver.name: usbhid-ups driver.parameter.pollfreq: 30 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.parameter.synchronous: no driver.version: 2.7.4.1 driver.version.data: MGE HID 1.42 driver.version.internal: 0.42 input.voltage: 240.0 outlet.1.status: on outle...

...hine with following packages installed: nut-client-2.7.2-3.el7.x86_64 nut-2.7.2-3.el7.x86_64 nut-cgi-2.7.2-3.el7.x86_64 $ upsc eaton5115 ambient.temperature: 43 ambient.temperature.high: 75 battery.charge: 100 battery.runtime: 24171 battery.voltage: 40.96 device.mfr: Eaton device.model: PW5115 RM 1500i device.part: XXXXXXXXX-XXXX device.serial: XXXXXXXXXX device.type: ups driver.name: bcmxcp_usb driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version: 2.7.2 driver.version.internal: 0.28 input.frequency: 50.00 input.frequency.high: 55 input.frequency.low: 45 input.frequency.nom...

...ature: 42 ambient.temperature.high: 70 battery.charge: 95 battery.charge.restart: 76 battery.charger.status: resting battery.energysave.delay: 0 battery.energysave.load: 0 battery.packs: 1 battery.runtime: 2760 battery.runtime.low: 2 battery.voltage: 52.26 device.mfr: Eaton device.model: PW5125 1500i device.part: 05146632-5501 device.serial: UX475A0xxxxx device.type: ups driver.name: bcmxcp driver.parameter.baud_rate: 9600 driver.parameter.pollinterval: 2 driver.parameter.port: /dev/cuaU0 driver.parameter.shutdown_delay: 120 driver.parameter.synchronous: no driver.version: 2.7.4 driver...

Hello I have a remote Dell R310 to which I connected via USB a new UPS, model Eaton 5E1500I USB. Assuming I interpreted correctly the docs, it should normally work using the usbhid-ups driver. However, no matter what I tried, I get an error which you can also is included in the below paste: #usbhid-ups -DDDD -u root -x explore -x vendorid="0463" -a eaton Network UPS Tool...

...23 strings out of 95898 2212 string characters out of 1195177 46816 words of memory out of 1050593 3336 multiletter control sequences out of 35000 3640 words of font info for 14 fonts, out of 500000 for 1000 14 hyphenation exceptions out of 607 23i,0n,17p,117b,36s stack positions out of 1500i,500n,5000p,200000b,32768s No pages of output. -------------- next part -------------- An embedded and charset-unspecified text was scrubbed... Name: Sweave-test-1.tex Url: https://stat.ethz.ch/pipermail/r-help/attachments/20050806/3f35b51d/Sweave-test-1.pl

This UPS is already listed in the compatibility list. But I wanted to add the instant commands supported by upscmd: ============================ Instant commands supported on UPS [PW5125]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper load.on - Turn on the load immediately outlet.1.load.off - Turn off the load on

...probably wouldn't need to know much to improve the issues in their docs so I'd like to have a go. I'm sure most of this is in nut docs, but I'm fitting this in between jobs and help would be appreciated so I can help quickly and with more certainty. My own UPS setup is an APC SUA 1500i + AP9630 card, and the default user on the UPS has been changed, so that's what I'll test anything with, to check my understanding and appropriate inputs. My questions are mainly about the config required to correctly link to an ethernet UPS using nut (connection/users/pw config), not so m...

2017-04-04 14:18 GMT+02:00 Jon Bendtsen <jon.bendtsen at jonix.dk>: > On 04/04/17 14.10, Roger Price wrote: > >> On Tue, 4 Apr 2017, Arnaud Quette wrote: >> >> > [cuuuuut] > > Hi Arnaud, It seems to me that, looking out into the future, there are >> three >> things upsmon needs: >> >> 1. A fall-through <notify type> of

...be able to test this branch and ack? (including the "covers (or > not) my needs...) yeah, I can do that, but I'd prefer to wait a few days and test with a machine that does nothing else and with NUT software that my main servers does not rely on. I've just ordered a new Eaton 5SC 1500i as a replacement because it is listed as very well supported. Once it gets here I'll get the broken UPS free and I'll install the NUT software on a test machine. JonB

...40 (see later). > After it charged to 37% I removed power from the UPS. After 4-5 minutes the > system shut down. > However, when I restored power to the UPS the machine powered up immediately > (no delay). I though it was supposed > to wait for a higher charge? Does the Eaton 5E 1500i have this ability? I don't see it mentioned in Eaton's PDFs for this UPS. There is no report for variable "ups.delay.start" in your upsc output. What does command "upsc <ups> ups.delay.start" report? > Nevertheless, the UPS reported a charge of 58% when the...

...01 22 14 0a 0.517643 HID descriptor, method 2: (9 bytes) => 09 21 10 01 21 01 22 14 0a 0.517651 HID descriptor length 2580 My config files : *nut.conf :* MODE=standalone *ups.conf* : [5px] driver = usbhid-ups port = /dev/5px vendorid = 0463 productid = ffff desc = <<EATON 5PX 1500i RT2U>> *upsd.conf* : MAXAGE 15 LISTEN 127.0.0.1 3493 MAXCONN 32 *upsd.users* : [ups] password = ups upsmon master *upsmon.conf* : MONITOR 5px at localhost 1 ups ups master MINSUPPLIES 1 FINALDELAY 5 HOSTSYNC 15 SHUTDOWNCMD "/usr/bin/systemctl poweroff" POWERDOWNFLAG /etc/killpowe...

Hello, Since yesterday I try to make my Eaton 5PX 1500i RT2U work with nut. Clearly impossible : Network UPS Tools - UPS driver controller 2.6.5-Unversioned directory Network UPS Tools - Generic HID driver 0.37 (2.6.5-Unversioned directory) USB communication driver 0.31 No matching HID UPS found Driver failed to start (exit status=1) I've had a lo...

...05 strings out of 96052 1946 string characters out of 1197190 46593 words of memory out of 1050795 3221 multiletter control sequences out of 35000 3640 words of font info for 14 fonts, out of 500000 for 1000 14 hyphenation exceptions out of 607 23i,1n,17p,117b,40s stack positions out of 1500i,500n,5000p,200000b,32768s No pages of output. === Any comments welcome! Murray -- Dr Murray Jorgensen http://www.stats.waikato.ac.nz/Staff/maj.html Department of Statistics, University of Waikato, Hamilton, New Zealand Email: maj at waikato.ac.nz Fax 7 838...

...'ve just made a test with the same unit, on a Debian jessie > (kernel 3.16.43-2, libusb 0.1.12-25) both with 2.7.4 and the latest > git master, and it works fine: > > battery.charge: 62 > battery.runtime: 2725 > battery.type: PbAc > device.mfr: EATON > device.model: 5E 1500i > device.type: ups > driver.name <http://driver.name>: usbhid-ups > [...] > I was expecting it to work fine, given https://risc-a-day.blogspot.ro/2014/09/getting-my-ups-to-work-with-linux.html ( before the purchase I assumed the units to be similar, modulo the maximum power )...

...strings out of 95848 8517 string characters out of 1195973 52319 words of memory out of 1000001 3751 multiletter control sequences out of 10000+50000 6376 words of font info for 23 fonts, out of 500000 for 1000 16 hyphenation exceptions out of 1000 32i,6n,21p,257b,222s stack positions out of 1500i,500n,5000p,200000b,5000s Output written on example-1.dvi (2 pages, 324 bytes).

...1890 strings out of 95898 23049 string characters out of 1195288 64391 words of memory out of 1067656 4842 multiletter control sequences out of 35000 13777 words of font info for 30 fonts, out of 500000 for 1000 14 hyphenation exceptions out of 607 35i,6n,21p,255b,187s stack positions out of 1500i,500n,5000p,200000b,32768s Output written on test.dvi (2 pages, 1192 bytes). JC Considine

...I've just made a test with the same unit, on a Debian jessie (kernel > 3.16.43-2, libusb 0.1.12-25) both with 2.7.4 and the latest git master, and > it works fine: > > battery.charge: 62 > battery.runtime: 2725 > battery.type: PbAc > device.mfr: EATON > device.model: 5E 1500i > device.type: ups > driver.name: usbhid-ups > [...] > > I was expecting it to work fine, given https://risc-a-day.blogspot. > ro/2014/09/getting-my-ups-to-work-with-linux.html ( before the purchase I > assumed the units to be similar, modulo the maximum power ) > you shoul...