search for: powerwar

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to...

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to...

Hi, I've got a Powerware Prestige 9 1kVA UPS that seems to not be working with nut. It's not in the current "supported hardware" list, but the old bcmxcp page lists it as being a UPS that speaks that protocol. I have the following in my ups.conf [powerware] driver = bcmxcp port = /dev/ttyS0 desc = &quot...

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001 Device 001: ID 0000:0000 > > /mnt/HD_a2/packages # upsdrvctl -DD start > Network UPS Tools - UPS driver controller 2.4....

Hi, I'm having trouble with nut running on feisty. I have a powerware 5110 connected using USB i did an "sudo lsusb -a" before and after i plugged in the powerware usb cable and did a diff on the results of the two which was: -- 322c322 < Port 2: 0000.0100 power --- > Port 2: 0001.0301 C_CONNECT lowspeed power connect -- current ups.conf is:...

I ordered some Powerware 3105 devices for Linux workstations. These devices only have an USB interface. I understood too late that support for Powerware devices is only available for the serial interface. Since the protocols over serial and USB seem to be identical, it was not too difficult to modify the bcmxcp driver to...

...er controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost: Receive error (data): got 33 bytes instead of 116!!! Communications with UPS lost: Receive error (Request command): COMMAND: 31 RECONNECT USB DEVICE Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: - Connect UPS device to USB bus - Run this driver as another user (upsdrvctl -u or 'user=...' in ups.conf). See upsdrvctl(8) and ups.conf(5). Fatal error: unusable configuration CLOSING Driver failed...

Hi Does there exist any work on getting the powerware driver to work with USB devices under freebsd? I have tryed with the usb enabled newhidups driver for freebsd but it does not seem to work. $ newhidups -a newhid -DD Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2) debug level is '2' found 0 (-1) No USB/HID UPS found //erlis ---...

Hi, I'm trying to get a Powerware 3105 UPS working on SuSE 10.0. I have compiled nut from the current Subversion repository. This UPS uses the bcmxcp_usb driver. I cannot get the driver to find the ups on the USB bus. The error message I get is:- -------------- bcmxcp_usb -u nut -DDDDD -a pw3105 -------------------- Network U...

I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. I looked a the list and didn't see a driver for it: http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton I see a driver for the 9130; any idea whether it will work with a 9125? Any other ideas for connecting the 9125 to a F...

Hello all! I've been trying to get my UPS working with my OpenBSD stable box and I haven't had any luck yet. dmesg shows that I have something from Powerware usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 biomask f5fd netmask fffd ttymask ffff ugen0 at uhub0 port 1 "Powerware Powerware UPS" rev 0.20/0.50 addr 2 nut version 2.4.0.-pre1 driverctl start gives Can't open POWERWARE USB dev...

On Sep 19, 2014, at 4:03 PM, Nello Lucchesi <nello at octobergroup.com> wrote: > I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. > > I looked a the list and didn't see a driver for it: > > http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton > > I see a driver for the 9130; any idea whether it will work with a 9125? > > Any ot...

I tried switching to the USB version of bcmxcp_usb and get this error when I try starting up upsdrvctl or bcmxcp_usb like so: /etc/nut/bcmxcp_usb -DDDD -a powerware -u nut I used this for ups.conf: [powerware] driver = bcmxcp_usb port = auto With the serial/usb dongle, I used this successfully: [powerware] driver = bcmxcp port = /dev/ttyUSB0 What devices does "auto" look for? I don't have a /dev/usb, but I do...

Hi, just wanted to confirm that Fiskars UPS 9000 series (aka Powerware Plus 500 series) with optional UPS Information Unit works fine with upscode2 driver. Tested on Fiskars 9200 (20kVA/400V/3ph). Regards, -- Sebastian Zagrodzki Dzia? Sieciowy ICM, Uniwersytet Warszawski s.zagrodzki at net.icm.edu.pl (+48-22) 5520527, 8268009, fax. 8284195 http://www.net.icm.e...

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:...

Kjell Claesson wrote: > Then i have a problem. My computer is down due to a > faulty mainboard, Youch. I hate it when that heppens. Hope it wasn't because you got a power spike ;-) Let me or Georg know if you want us to run any debug code. Feels like a bcmxcp_usb driver bug to me since the bcmcxp serial driver works fine and all my other USB devices work fine (wifi adapter, memory

Hi Arnaud, Any luck with the latest subversion trunk? From: Greg Sent: Wednesday, May 13, 2009 10:34 PM To: Greg ; Arnaud Quette Cc: Kjell Claesson ; nut-upsuser at lists.alioth.debian.org Subject: Re: [Nut-upsuser] Nut and PowerWare 5115 Hi Arnaud, Some more testing on Ubuntu 9.04. Here is the output of bcmxcp_usb and lsusb ============================================ root at Ubuntu9:/lib/nut# ./bcmxcp_usb -a PowerWare -u root Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 usb_set_...

I decided to try this to see if it worked better since Powerware decided to build in some oddball USB protocol instead of using a HID UPS profile, but it doesn't seem to work. The USB/serial dongle is recognized by Linux and added as /dev/ttyUSB0, owned by group "dialout", so I had to add the nut user to the dialout group. In the compatibility l...

Hi all, I've got a Powerware 5110 UPS that I'm trying to set up with nut in Ubuntu. I've installed nut and configured the first two files: $ cat /etc/nut/nut.conf MODE=standalone $ cat /etc/nut/ups.conf [pw5110] driver = bcmxcp_usb port = auto # port = /dev/bus/usb/002/002 When I try to test this configuration wi...

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/...