similar to: UPSC dump for Eaton/Powerware 5115 Rackmount unit (driver version 2.7.2)

Hello. I've tried to configure Windows (complete port, Beta): Windows MSI installer 2.6.0-1 with my Powerware 5115 connected via USB port but have no luck. Here is my config files: *nut.conf:* MODE = netserver *ups.conf:* [PW5115] driver = bcmxcp_usb port = notUsed desc = "PowerWare 5115" *upsd.conf:* LISTEN 192.168.1.12 3493 *upsd.users:* [monuser]

Hi I have PW 5115 500 UPS which has both RS232 and USB connectors. bcmxcp driver works fine with serial connection but bcmxcp_usb does not with USB one. After some USB sniffing on windows box I've found that PW5115 communicates in other way than supposed in driver. Applying attached patch makes driver to work properly. System: FreeBSD 6.2 but ugen driver needs patching in order to respect

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

Hi all, I know there are some howto's about Powerware 5115 and Ubuntu, but I can't still get that thing working. Can someone give some light... 1. Powerware 5115, serial port (ttyS0) 2. Ubuntu 6.06.1 as LTSP-server As reference: http://gentoo-wiki.com/HOWTO_NUT http://keystoneit.wordpress.com/2006/09/25/network-ups-tools-nut-on-ubuntu/ --- a. I try to start driver as root. root at

On 2/21/2017 8:34 AM, Charles Lepple wrote: > On Feb 20, 2017, at 11:19 AM, Mike <the.lists at mgm51.com> wrote: >> >> This UPS is already listed in the compatibility list. But I wanted to >> add the instant commands supported by upscmd: >> > ... >> and note that a delayed shutoff command is not available. >> >> (NUT 2.7.4 on OpenBSD 6.0)

Hi, I'm trying to get a Powerware 5115 to communicate with the NUT via USB under Debian Linux and need help. Here is the output that I see. co-nh5:/tmp/mnt/projects/pwusb/nut-2.4.1# /usr/local/ups/bin/upsdrvctl -u root start Network UPS Tools - UPS driver controller 2.4.1 Network UPS Tools - BCMXCP UPS driver 0.21 (2.4.1) USB communication subdriver 0.17 Communications with UPS lost:

Hello, I set up a FreeBSD 8.2 system with nut 2.6.1 and a Powerware 5115 connected by RS-232. I expected this setup to shut down before running out of battery power, but I either missed some important configuration or something else went wrong: The syslog says: Jan 9 05:03:42 b1 upsmon[67752]: UPS upsb1 at localhost on battery Jan 9 05:04:42 b1 upsmon[67752]: UPS upsb1 at localhost on line

Hi everyone, Been searching like crazy to find an answer to this. I have even read some of the source code but cannot figure this one out. I have installed nut 2.4.1 on my QNAP 409 Pro. (command: ipkg install nut) I have configured the ups.conf, upsd.conf and upsd.users. When i run "upsdrvctl start" I get the following error messages and output.

During the last month, I've been integrating a Powerware 5115 into an embedded system by writing a custom NUT daemon. This work has gone quite well and NUT has been very helpful, but it sure would be nice to have some additional instcmds for the 5115. The bcmxcp driver comments mention "manuals for the BCM/XCP". I'm wondering if I could get a copy of those so that I might

I am seeing some problems when using the Powerware 5115 UPS when connected to the Patsburg USB controller and would like to know if anyone has a solution. The symptom is that PING messages sent to the bcmxcp_usb driver take as long as 25 seconds to complete. The configuration is a Romley patform (a.k.a., Sandy Bridge + Patsburg) running Debian 6 with 2.6.39 kernel with NUT 2.6.4 in which the

I'm running Solaris 11 Express (snv_151a X86) with NUT 2.6.0 compliled from the source tarball and a Powerware 5115. I was seeing the driver hang, so gave it some '-D's (23 apparently ;-) and found that it seems to be getting into an infinite loop when reading data from the UPS. The debug output is attached and I would be very grateful for some help or advice on what to try next.

Hi Georg, > one question with regard to a Powerware 5115 UPS connected to a Debian 3.1 > Sarge box via USB: I downloaded and compiled nut 2.0.2 but I am unable to > configure the USB subsystem so that upsdrvctl recognizes the UPS. > > My /usr/local/ups/etc/ups.conf contains: > > [bla] > driver = bcmxcp > port = /dev/usbdev2.2 > desc = "bla bla

I've got some strange problem with NUT on my 5115 on Debian Etch: ---snip--- $ sudo ./bcmxcp_usb -DDDDDDD -a 5115 Network UPS Tools - BCMXCP UPS driver 0.13 (2.3.0-1181) Warning: This is an experimental driver. Some features may not function correctly. debug level is '7' Can't set POWERWARE USB configuration Unable to find POWERWARE UPS device on USB bus Things to try: -

Hello, ppl! I try configure NUT for communicate with my Powerware 5115 UPS. As root I run '/lib/nut/bcmxcp_usb -DDDD -u root -a ups', but driver can't connect to my UPS. Some output: Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) debug level is '4' usb_set_debug: Setting debugging level to 3 (on) usb_os_init: Found USB VFS at /dev/bus/usb usb_os_find_busses: Found 001

On 13/02/14 12:16, Charles Lepple wrote: > On Feb 12, 2014, at 7:50 PM, Tim Dawson wrote: > >> Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. I ran the new driver (see below) and with -DDDD it throws out

On Sep 19, 2014, at 4:03 PM, Nello Lucchesi <nello at octobergroup.com> wrote: > I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. > > I looked a the list and didn't see a driver for it: > > http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton > > I see a

I'm looking for a driver for and old uninterruptible power supply (UPS), Eaton Powerware 9125 2500U. I want to use it with my FreeNAS server. I looked a the list and didn't see a driver for it: http://www.networkupstools.org/stable-hcl.html?manufacturer=Eaton I see a driver for the 9130; any idea whether it will work with a 9125? Any other ideas for connecting the 9125 to a FreeNAS

Hi, OS: FreeBSD 9.0-RELEASE NUT version: nut-2.6.5_1 (installed from ports) UPS: Eaton powerware 5110 Can you help me with this device, please? [root at mail /usr/local/etc/nut]# /usr/local/libexec/nut/usbhid-ups -DDDD -a eaton Network UPS Tools - Generic HID driver 0.37 (2.6.5) USB communication driver 0.31 0.000000 debug level is '4' 0.001239 upsdrv_initups... 0.001958

Run the driver with -DDDDD and see what variables it picks up. I have noted that with the Prestige 9 in bcmxcp, some variables are not consistent within models, and had to do some gentle remapping to get things to work correctly. - Tim On 02/12/2014 06:46 PM, Greg Vickers wrote: > Hi all, > > I've hooked up an Eaton Powerware 5110 to Ubuntu 13.10 server, and > configured nut

Hi there, all I have subj UPS, connected by USB. ups.conf: === [eaton] driver = bcmxcp_usb port = auto desc = "Eaton Powerware 9120 3000" override.battery.charge.low = 91 === upsmon.conf: === NOTIFYCMD /sbin/upssched NOTIFYFLAG LOWBATT SYSLOG+WALL+EXEC === upssched.conf === CMDSCRIPT /etc/nut/ups.sh AT LOWBATT * START-TIMER battery 3 AT ONLINE *