search for: eaton

Dear NUT users, The relationship with Eaton was in need of clarification for a long time, which happened over the past weeks.This is now officially noted on the NUT side, through moving Eaton from the "Main supporter" to "Supporting UPS manufacturer", rewording the content and putting a big warning [1]. Quoting these mai...

On 15/02/14 19:56, Arnaud Quette wrote: > Dear NUT users, > > The relationship with Eaton was in need of clarification for a long > time, which happened over the past weeks.This is now officially noted > on the NUT side, through moving Eaton from the "Main supporter" to > "Supporting UPS manufacturer", rewording the content and putting a big > warning...

Nut for Windows 2.6.3-3 + Eaton/PW 5110 (103004256-5591). I had to manually install libusb driver and I'm using bcmxcp_usb. upsd.exe is reporting to me "Out of memory". It will run, but once anything connects to the daemon, it dies with that message. I don't have much experience with NUT yet so I'm not s...

I've used NUT successfully for monitoring many different brands of UPS, but this one has me stumped. It has the same manufacturer ID and Product ID as older supported MGE-type Eaton UPS's, but has trouble talking. I tried Ubuntu's repo NUT, and it logs a Connecting to UPS message every few seconds forever, but never really succeeds (or says it fails). Different failure mode after building latest NUT d/l, as shown below. I have a udev rule in place, restarted udev and h...

Hello I recently bought a small UPS by Eaton (Ellipse ECO 800) in order to prevent my btrfs-fileserver (running Debian 12 Bookworm 12.4 from shutting down abruptly while writing something important during a power loss. I am using the version 2.8.0.7 provided by Debian. I have found very gooddocumentation on how to set up the UPS and the servi...

On Fri, 11 Sep 2020, Bartosz wrote: > Could you please recommend me a UPS with 100% support of the ondelay parameter and NUT compatibility? > 850 or 1000 VA > I have the EATON 5E850iUSBDIN UPS and it does not support this parameter so I would like to buy another UPS that for sure will support it. The Eaton 5P 850G and the 5P 1000 have the option "Auto start delay": Load segments - Auto start delay [No Delay] [1 s] [2 s]…[65354 s] The connected load is pow...

I wanted to suggest some rating for functionality. I got the UPS available that seemed to have the best possible rating from NUT's list (Eaton Powerware UPS 1500), and found out it doesn't support telling me battery level or runtime! :/ Luke

Hello guys, I have to manage an Eaton Ellipse ASR 750 VA UPS under a FreeBSD 8.2 server. I used nut from ports collection but I'm unable to detect the UPS by USB cable. Here is the output of 'usbconfig -u 4 -a 2 dump_device_desc' : ugen4.2: <ELLIPSE EATON> at usbus4, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON bLength =...

...emains is the missing lines from previous lifetime in the short excerpt of upsd: why did it restart at that time? :) Jim On Fri, Jan 19, 2024 at 6:13?AM Stefan Schumacher via Nut-upsuser < nut-upsuser at alioth-lists.debian.net> wrote: > Hello > > I recently bought a small UPS by Eaton (Ellipse ECO 800) in order to > prevent my > btrfs-fileserver (running Debian 12 Bookworm 12.4 from shutting down > abruptly while writing > something important during a power loss. I am using the version > 2.8.0.7 provided by Debian. > I have found very gooddocumentation on how t...

Dear NUT developers, As you all know, Eaton is NUT biggest corporate fan, supporting the project through many contributions. Now, Eaton would like to provide its customers with a way to build their own applications to interface with Eaton devices, using the NUT code-base. To do this, in a smart and efficient way (ie limiting additions and...

...have a >separate syslog setup anyway, maybe on a remote "sink" system, so just >cutting one off always is not right). > >So one question that remains is the missing lines from previous lifetime in >the short excerpt of upsd: why did it restart at that time? :) I also have Eaton UPS, just different model. It sometimes disconnects and nut has to connect again. I guess this is what happened. I assume the disonnect message is not visible in "Systemctl status" message because it does not belong to the current process but previous one. Looking for syslog (/var/log/...

Luke-Jr wrote, On 9/18/2013 1:02 PM: > I wanted to suggest some rating for functionality. I got the UPS available > that seemed to have the best possible rating from NUT's list (Eaton Powerware > UPS 1500), and found out it doesn't support telling me battery level or > runtime! :/ I'm avoiding Eaton/Powerware because the lack of usbhid support, the bcmxcp driver doesn't report much, but I have heard that someone is working on it. Also a PW5110 500 (to replac...

Le samedi 12 septembre 2009 ? 01:59 -0300, Vitor Choi Feitosa a ?crit : > Hi Arnaud, Hi Vitor, > I found your email on the contact page and since you seem to work for > Eaton and is involved in the NUT community I think you're the right > person to contact. > > I've got an Eaton NV 1000H and just installed it here. Before NUT > configuration I've checked the HCL for my UPS and didn't find it > there. After trying a few drivers I found tha...

Dear fellows, As you have probably seen, NUT has had a recent boost through the help of Eaton. Frederic Bohe (contractor for Eaton France) has worked on Augeas, and is now working the Windows port. Chetan Agarwal, seconded by Prashi Gandi (both from Eaton India) are working on XCP and quality / validation related projects. I'm now pleased to announce that Emilien Kia (contractor for...

On 19/09/13 01:30, Kris Jordan wrote: > Luke-Jr wrote, On 9/18/2013 1:02 PM: >> I wanted to suggest some rating for functionality. I got the UPS >> available >> that seemed to have the best possible rating from NUT's list (Eaton >> Powerware >> UPS 1500), and found out it doesn't support telling me battery level or >> runtime! :/ > > I'm avoiding Eaton/Powerware because the lack of usbhid support, the > bcmxcp driver doesn't report much bootc at tarquin ~ $ upsc pw9120 ambient.tempe...

Hi, I have the Eaton 5E850iUSBDIN UPS connected via USB to a Raspberry Pi 3B+. It seems that everything but the ondelay parameter works so far. when I test the setup with this command: upsmon -c fsd The NUT server makes the NUT clients shut down properly and the Raspberry Pi running the NUT server shuts down correctl...

Hello, we try to use Network UPS tools to monitor a network connected Eaton 93PS UPS. It basically works but we get frequent "Data is stale - check driver" warnings with a "data is no longer stale" shortly after in the log. We tried both snmp-ups and netxml-ups driver and both raise the same error. If have captured the communication between nut...

Windows 7 Pro x64 Eaton 3S550 (brand new, battery mfg 8/15/2012) NUT 2.6.5-3 ups.status: OL CHRG CHRG was present even though it has been plugged in a few days turned on and battery.charge was 100%. Log includes me running upsc and removing power long enough to see that battery.charge will decrease. This UPS doesn...

Hi. I'm using ubuntu 10.04 and I'm in the process of buying a ups. This is it (eaton 5115 ups) with usb interface http://powerquality.eaton.com/05146561-5591.aspx?CX=3 I had a look at the ups compatibility chart here: http://www.networkupstools.org/stable-hcl.html But I can't find this particular ups listed. I plan to use NUT v. 2.4.3 that I can get from the repos...

Hello, I have trouble connecting to an Eaton 5PX UPS via the usbhid-ups driver. It is supposed to be fully working according to the compatibility list (support level 5). OS: A fresh Debian stable install. Then changed the apt source to unstable and did "aptitute update" and "aptitude install nut". Nothing else. I did that...