John Millican
2007-Oct-26 13:52 UTC
[asterisk-users] ABE, Sangoma, T-1 no recognizing calls
Hello All, I have a setup of ABE on rPath linux,Sangoma A101D, and a T-1 line (Not PRI) which is all happily coexisting and all lights are green. The T-1 comes in from the world into a "Shark Box" which splits the T into 384K data and 6 channels voice. The data side is working great. The voice side, not so great. It was originally broken out to 6 pots line and Verizon came back and swapped cards in the shark and now it is a T-1 out. Wanrouter, zaptel and asterisk are all apparently happy. When I place a call to * I hear ring on the calling side but do not ever see anything in happen on the * side. When I try to call out i get: Executing Dial("SIP/xxx.xxx.xxx.xxx-ab5012d0", "zap/3/603xxxxxxx") in new stack -- Called 3/603xxxxxxx And nothing else, at one time I was getting a zap/answered line but no more. Relevent zapata.conf [channels] context=default usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:8 bus:3 span: 1] context=from-pstn group=0 signalling=fxo_ls channel => 1-6 zaptel.conf loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:8 bus:3 span: 1] span=1,1,0,esf,b8zs fxols=1-6 Extensions.conf [from-pstn] exten => _X.,1,Dial(zap/3/603xxxxxxx); Very simple setup at this moment, nothing fancy. I am able to dial in via sip and asterisk answers and send the call to the from-pstn context at which point i see Executing Dial(blah, blah) in new stack; I believe at this time that the problem is in the setup of the shark box. Verizon tells me that there end is good and the T-1 is esf, B8ZS, loop start. But I thought I would ask the list for some opinions before I started pointing the finger. Thank you for any help JohnM
Your signalling is wrong. The channels as programming in * should fxsks (use ks instead of ls) and not fxols. At Verizon's end, they use fxo and you grab it via fxs emulation in *. Lyle John Millican wrote:> Hello All, > I have a setup of ABE on rPath linux,Sangoma A101D, and a T-1 line (Not PRI) > which is all happily coexisting and all lights are green. > The T-1 comes in from the world into a "Shark Box" which splits the T into > 384K data and 6 channels voice. The data side is working great. The voice > side, not so great. It was originally broken out to 6 pots line and Verizon > came back and swapped cards in the shark and now it is a T-1 out. Wanrouter, > zaptel and asterisk are all apparently happy. When I place a call to * I > hear ring on the calling side but do not ever see anything in happen on the * > side. When I try to call out i get: > Executing Dial("SIP/xxx.xxx.xxx.xxx-ab5012d0", "zap/3/603xxxxxxx") in new > stack > -- Called 3/603xxxxxxx > And nothing else, at one time I was getting a zap/answered line but no more. > > Relevent zapata.conf > [channels] > context=default > usecallerid=yes > hidecallerid=no > callwaiting=yes > usecallingpres=yes > callwaitingcallerid=yes > threewaycalling=yes > transfer=yes > canpark=yes > cancallforward=yes > callreturn=yes > echocancel=yes > echocancelwhenbridged=yes > relaxdtmf=yes > rxgain=0.0 > txgain=0.0 > group=1 > callgroup=1 > pickupgroup=1 > > immediate=no > > ;Sangoma A101 port 1 [slot:8 bus:3 span: 1] > context=from-pstn > group=0 > signalling=fxo_ls > channel => 1-6 > > zaptel.conf > loadzone=us > defaultzone=us > > #Sangoma A101 port 1 [slot:8 bus:3 span: 1] > span=1,1,0,esf,b8zs > fxols=1-6 > > Extensions.conf > [from-pstn] > exten => _X.,1,Dial(zap/3/603xxxxxxx); > > Very simple setup at this moment, nothing fancy. I am able to dial in via sip > and asterisk answers and send the call to the from-pstn context at which > point i see Executing Dial(blah, blah) in new stack; > I believe at this time that the problem is in the setup of the shark box. > Verizon tells me that there end is good and the T-1 is esf, B8ZS, loop start. > But I thought I would ask the list for some opinions before I started > pointing the finger. > Thank you for any help > JohnM > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users >