search for: a101

.../xtravoip200-009d24b0' wanrouter status: wanrouter status Devices currently active: wanpipe1 wanpipe2 wanpipe3 wanpipe4 wanpipe5 wanpipe6 wanpipe7 wanpipe8 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 | N/A | 0 | wanpipe2 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 | N/A | 0 | wanpipe3 | N/A | A101/1D/A102/2D/4/4D/8| 17 | 4 | 1 | N/A | 0 | wanpipe4 | N/A | A101/1D/A102/2D/4/4D/8...

Hi All Just a quick check on the best way to ensure multiple cards/devices load in the correct order. Asterisk 1.8 with Sangoma A101 had no problems until we introduced an Astribank. root at pabx377:/etc/asterisk# dahdi_hardware -v usb:001/004 xpp_usb+ e4e4:1162 Astribank-modular FPGA-firmware LABEL=[usb:X1060395] CONNECTOR=@usb-0000:00:1d.7-3 XBUS-00/XPD-00: FXS (14) Span 2...

I have an issue that hopefully you can help me solve. I've got the sangoma a101 card and installed it on freebsd but I according to the manual I should be see when running dmesg PCi0 vendor..... something that tells me sangoma it's being recognized by the system. Now this is the 2nd card I try, the first one according to support was faulty and they sent me a new one. Is it...

I upgraded from Tormenta2 to Sangoma A101. I followed the instructions, and installation was successful. zttool, ztcfg, all show card is installed properly. I copied the parameters from my old working zaptel.conf, zapata.conf and zapata-auto.conf. Verified on Sangoma website that these files are correct. Also configured wanpipe1.conf. But...

We will be connecting our Asterisk server to ISDN 30 and intend using the Sangoma A101 card. The install location is in London (UK). Sangoma card at Voipon http://www.voipon.co.uk/sangoma-a101-pri-isdn-card-p-132.html?gclid=CI32vJz22I0CFQXklAodIgjHaA I would be grateful to hear if this is the right choice of card. Usage reports would be helpful. Regards Rory -- Rory Campbell-Lan...

Hiya all, I have had no end of trouble trying to get my A101 E1 card working on a new asterisk installation. The sangoma tech people have ignored my emails about this. All the installation of wanpipe seems to go ok, and zaptel. it all installed compiled and does all the wanpipe hwprobe exactly as documented. Asterisk compiled ok, but when I run it give...

Uys, Steve Underwood I just got a Sangoma A101 card and Im using unicall 0.0.3.pre9 for R2MFC, I get the far and local end unblocked but as soon as I try to make a call I get dialing and then protocol failure.. Do you guys know if there are any issues with sangoma and unicall? Anybody has an a101 card working with unicall and r2mfc? Are you...

We are having an occasional one w-way audio problem that occurs about every 25 - 30 calls on a system configured as follows: Asterisk 1.2.12.1 Sangoma A101 w/wanpipe beta9 Polycom 500s w 1.5.3 This happens only on inbound calls from the PRI. The external caller can hear our customer answer and say hello, however, our customer cannot here their caller. Typically, the caller calls right back and all is fine. There is no discernable pattern as I can...

I just got a brand new A101 and am trying to install it in my test Asterisk box. The install went without a hitch. I followed the directions on the Sangoma Wiki: Wanpipe Asterisk Install http://sangoma.editme.com/wanpipe-linux-asterisk-install Wanpipe for Asterisk Configuration http://sangoma.editme.com/wanpipe-asterisk-confi...

Any benefit on getting the PCI Express version? Bill -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070222/62f79910/attachment.htm

Im trying to install and configure sangoma ... every thing is OK but when type the command "wanrouter start" the following error apears: wan Driver not found. Thanks for any help

Hello, I would like to convert an objects list such as objects() or ls() that outputs "a101" "a102" "a104" "a107" "a109" to read within a list statement as follows : list(a101,a102,a104,a107,a109) Thanks Tony >>>>>>>>>>>>>>>>>>>>>>>>>>>>>&gt...

We are trying to configure a Sangoma A101 card to allow both incoming and outgoing calls on a UK (BT) ISDN30e line with only 24 channels enabled. At present incoming calls work fine. We can't call out -- we get a BUSY/CONGESTED error. Do we need another context in our zapata.conf? In other words, do we need to reserve, say, channels...

Skipped content of type multipart/alternative-------------- next part -------------- _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev

Hi there, we have a problem with dahdi and overlapdial. We are running an E1 in Germany and are in need of overlapdial. The E1 is connected to a Sangoma A101. As soon as overlapdial is set to "yes" we have problems with incoming audio on the dahdi channels. When set to "no" all audio is fine. Basically we can choose between being able to receive calls or to place calls :) Details: Software: asterisk-1.6.1.0.tar.gz libpri-1.4.9....

I am having a problem trying to get a Sangoma A101 to work with Unicall. I have installed the sangoma drivers and everything seems to be well but when I try to run ztcfg I get the following error: CAS signalling on span 1 conflicts with HDLC with FCS check on channel 16. Here is my /etc/zaptel.conf # MFC/R2 normalmente no usa CRC4 span=1,0,0,c...

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma...

...#39;bootloader'', ''''], [''vcpus'', 1], [''cpus'', [[0, 1]]], [''on_poweroff'', ''destroy''], [''on_crash'', ''restart''], [''uuid'', ''be52df45-4a7e-48ab-a101-3f6693d0ecf4''], [''bootloader_args'', ''''], [''name'', '' fsb.t.org''], [''on_reboot'', ''restart''], [''maxmem'', 129], [''memory'', 128], [''shadow_mem...

Hi, I am considering A101/102/104 cards for my asterisk installations. Has any of you used these or any Sangoma cards in such environment? Any thoughts? How do they stack up against Digium cards? Any input would be greatly appreciated. robert

...ces like digitnetworks.com for $475, and I guess there's always a place for good-olde-obsolete cards in the world as long as they work :-) - Digium TE110P: replacement for the above card. Costs $595 at the Digium webstore; aditionally can be configured to work with both E1 *and* T1. - Sangoma A101: billed as "compatible with Asterisk" on Sangoma's page at http://www.sangoma.com/products/p_a101-102-specs.htm; also for E1 and T1, the specs list only compatibility with CAS and PRI signaling, but a pal asked Sangoma directly and they said that the card is compatible with E1/R2 sign...