search for: fxo_l

...es=no callwaitingcallerid=no threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes echotraining=yes busydetect=yes busycount=5 callprogress=no rxgain=0.0 txgain=0.0 group=1 language=doug ;use DF's custom announcements signalling=fxo_ls context=from-officephones group=1 callerid => 2401 channel => 1 signalling=fxo_ls context=from-officephones group=1 callerid => 2402 channel => 2 signalling=fxo_ls context=from-officephones group=1 callerid => 2403 channel => 3 signalling=fxo_ls context=from-officephones group...

Hello everyone, Our company has an Asterisk server where one of the T1s is connected to an IVR. Asterisk is configured for FXO Loopstart, and the IVR is configured FXS. We can call into it, but our software doesn't expect DNIS digits on FXS, and the digits are being interpreted as user input. We can certainly change our software accordingly, but our test bed also includes other

I'm replacing a Merlin for a client and they have a PagePal Intercom that I would like to reuse. Here is what I know about it: It has a screw-down wires that goto rj-11 (This was told to me over the phone) that went into one of the Merlin ports. I tried bring it up with fxo_ks and fxo_ls (assuming it was analog and autoanswered) but no luck. I would be happy to replace if anyone knows of an analog phone to page system, but of course I would like to reuse what is there. Thanks for any advice or pointers, Jeb Campbell jebc@c4solutions.net

...roup=0 echocancel=yes signalling = fxs_ks channel => 4 - --------------------------------------------------------------------- I was comparing this configuration with which I have in my house with a OpenVox card, where callerid works, and the unique difference that I found is that I'm using fxo_ls. Can be it the cause of the problem? Thanks in advance for your replies. Regards, Daniel -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) iEYEARECAAYFAkvx7OkACgkQZpa/GxTmHTcWsACglvrpdwGsyzc1ZNOIJplgctsh hGEAnjEJPReISMuPUm96gX2Yqcg9WoqA =AeXz -----END PGP SIGNATURE-----

...working. Lsmod shows : zaptel 179808 0 I did a . # modprobe zaptel and here is my zaptel.conf (comments omitted) __SNIP__ fxsks=1 loadzone = us defaultzone=us __SNIP__ Here is zapata.conf __SNIP__ [trunkgroups] [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes group=1 callgroup=1 pickupgroup=1 immediate=no context=sip signalling=fxs_ks callerid=&q...

...nguage = en callwaiting = yes threewaycalling = yes transfer = yes cancelforward = yes callreturn = no usecallerid = yes hidecallerid = no echocancel = yes echocancelwhenbridged = yes ;immediate = no txgain=1.0 rxgain=1.0 callprogress=no busydetect=no group = 2 ;use with FXO PCI card signalling = fxo_ls ;channel => 13-24 channel => 1 context = local group = 1 ;use with FXS USB card signalling = fxs_ls ;callerid = "John Doe" <(710) 555-6200> channel => 13 -- Jonathan Moore Director of Technology Winfield Public Schools Office 620.221.5100 Fax 620.221.0508 Visit Wi...

...nd-start for me? What are they used for? Next, I have the following configurations: dahdi-channels.conf : context=pstn-channels signalling=fxs_ks channel=>130 context=phone-channels signalling=fxo_ks channel=>127 chan_dahdi.conf : [channels] cidsignalling=dtmf cidstart=dtmf signalling=fxo_ls pulsedial=no usecallerid=yes context=pstn-channels channel=>130 signalling=fxs_ls context=phone-channels channel=>127 extensions.conf : [pstn-channels] exten=>_.,1,Dial(DAHDI/127/${EXTEN}) [phone-channels] exten=>_.,1,Dial(DAHDI/130/${EXTEN}) /dahdi/system.conf fxoks=125-128 fxsks...

...canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A104 port 3 [slot:1 bus:1 span:3] <wanpipe3> context=from-cb group=3 echocancel=yes signalling=fxo_ls channel => 49-72 immediate=yes Extensions.conf: [from-cb] exten => s,1,DISA,no-password|internal [internal] include => sip-stations include => iax-trunks include => outbound [outbound] exten => _1XXXXXXXXXX,1,Dial(DAHDI/g1/${EXTEN}) e...

...nteface on a TDM400 to a standard telephone. I see that all examples use fxo_ks, but it is my understanding that kewl start is really designed for connections to the CO so that hangup etc. can be detected. So does it make any sense to configure a telephone for fxo_ks? Or should it be configured for fxo_ls? Regards Garry Taylor

...in the end of this mail. I am probably missing something very stupid, and I would like to hear what do you think it is. [channels] language=en threewaycalling=yes transfer=yes usecallerid=yes echocancel=yes echocancelwhenbridged=yes ;echotraining=800 faxdetect=incoming ;;;;;;[401] signalling=fxo_ls record_out=Adhoc record_in=Adhoc mailbox=401 immediate=no group=5 echotraining=yes echocancelwhenbridged=no echocancel=yes context=from-internal callprogress=no callerid=ZAP channel 1 <401> busydetect=no busycount=7 channel=>1 ;;;;;;[402] signalling=fxo_ls record_out=Adhoc record_in=Adho...

...ly idle without IRQ sharing : 20: 602869735 602487558 IO-APIC-level wctdm 21: 602485799 602863515 IO-APIC-level t1xxp zaptel.conf : span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 fxoks=32-35 zapata.conf : [channels] faxdetect=incoming context=default switchtype=euroisdn signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=no echocancelwhenbridged=no rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no signalling=pri_cpe context=inco...

I am trying to find an example of how to set up my FXS Station Card in my Asterisk. I have (1) XP100P I have (1) tdm20B (2 Port FXS) Could someone tell me if this is correct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes

...conf (uncommented lines) ============= fxsks=1 loadzone = us defaultzone=us ============= zaptel.conf ======================= ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; context=default ; switchtype=national signalling=fxo_ls rxwink=300 ; Atlas seems to use long (250ms) winks usecallerid=yes hidecallerid=no callwaiting=yes callwaitingcallerid=yes ; ; Support three-way calling ; threewaycalling=yes ; ; Support flash-hook call transfer (requires three way calling) ; transfer=yes ; ; Support call forward vari...

Hi. I have a x100p card installed on my asterisk box... my zapata.conf file includes the following lines: [channels] context=default switchtype=national signalling=fxo_ls rxwink=300 echocancel=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 Basically, the zapata.conf file generated by make samples. Then in my extensions.conf I have this: [default] include => demo And demo is also the included in the sample extensions.conf Now, when I call into...

...lwaiting=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=no echocancel=yes echocancelwhenbridged=yes relaxdtmf=no rxgain=0.0 txgain=0.0 group=2 callgroup=2 pickupgroup=2 immediate=yes busydetect=no adsi=yes musiconhold=default signalling=fxo_ls context=internal callerid="Internal Unknown"<000> channel => 2-5 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030518/b8bd01f5/attachment.htm

...g=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A104 port 3 [slot:4 bus:9 span:7] <wanpipe7> context=to-cbfxs group=2 echocancel=no signalling=fxo_ls channel => 145-164 context=from-cbfxo group=3 echocancel=no signalling=fxs_ls channel => 165-168 Held figuring this out would be appreciated! -- Jim Dickenson mailto:dickenson at cfmc.com CfMC http://www.cfmc.com/

...gcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes relaxdtmf=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no ;Sangoma A101 port 1 [slot:8 bus:3 span: 1] context=from-pstn group=0 signalling=fxo_ls channel => 1-6 zaptel.conf loadzone=us defaultzone=us #Sangoma A101 port 1 [slot:8 bus:3 span: 1] span=1,1,0,esf,b8zs fxols=1-6 Extensions.conf [from-pstn] exten => _X.,1,Dial(zap/3/603xxxxxxx); Very simple setup at this moment, nothing fancy. I am able to dial in via sip and asterisk...

...ines at the bottom: echocancel=yes echocancelwhenbridged=no echotraining=yes context=companyA-pstn txgain=0.0 rxgain=0.0 signalling=fxs_ks group=1 channel=1-7 context=companyB-pstn txgain=0.0 rxgain=0.0 signalling=fxs_ks group=2 channel=11-12 context=internal txgain=-12.0 rxgain=-8.0 signalling=fxo_ls callerid=asreceived group=3 channel=13-48 When the calls are connected, I can use "zap show channel 11" and verify that the echo cancellation is ON. But I can still hear one. I've also tried echocancelwhenbridged=yes, but it didn't make any difference. -- Shaw Terwilliger &lt...

.../zapata.conf [channels] context=default switchtype=national usecallerid=yes hidecallerid=no callwaiting=no usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 signalling=fxo_ls callgroup=1 pickupgroup=1 immediate=no context=internal busydetect=yes callerid="James Bean<690>" ;assuming extension 690 mailbox=690 ;stutter tone for voicemail - you can use an optional context here transfer=yes channel=>1 group=2 signalling=fxs_ls con...

...device (a TDM400P) as Channel 2 fxols=2 My zapata.conf: ========== [channels] language=en context=pstn signalling=fxs_ls usecallerid=yes echocancel=yes echocancelwhenbridged=yes rxgain=+0 txgain=+0 channel => 1 ;Channel 1 will be the X100P PSTN card language=en context=CustomerSide signalling=fxo_ls usecallerid=yes echocancel=yes echocancelwhenbridged=yes channel => 2 ;Channel 2 will be the TDM400P card Thanks in advance for any help, Anon