asterisk users - Aug 2007 - TE405/TE410P help updating from 1.0 to 1.4

I have a TE405/TE410P card that was working on 1.0.X

I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and zaptel to 
1.4.5 and libpri.

I copied all the zaptel and zapata and extensions.conf files from 1.0

I did update extensions.conf from 1.0 to 1.4 commands.

I cannot get the card to work in 1.4.10. AHHH!

I see with zttool that the T1 is in Green, I see calls coming in as the 
bits go high on channel 8,
zaptel doesnt respond so it tries channel 7 then gives up.

Any ideas what this might be??? zaptel modules load, asterisk loads. 
ztcfg gives correct reply
everything looks good just not working.

jerry

On Mon, Aug 20, 2007 at 09:23:20PM -0400, Jerry Geis
wrote:
> I have a TE405/TE410P card that was working on 1.0.X
> 
> I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and zaptel to 
> 1.4.5 and libpri.
> 
> I copied all the zaptel and zapata and extensions.conf files from 1.0
> 
> I did update extensions.conf from 1.0 to 1.4 commands.
> 
> I cannot get the card to work in 1.4.10. AHHH!
> 
> I see with zttool that the T1 is in Green, I see calls coming in as the 
> bits go high on channel 8,
> zaptel doesnt respond so it tries channel 7 then gives up.
> 
> Any ideas what this might be??? zaptel modules load, asterisk loads. 
> ztcfg gives correct reply
> everything looks good just not working.
What is the output of a call trace from the CLI:

core set verbose 3


And report what you see when you try to call out.

-- 
               Tzafrir Cohen       
icq#16849755                    jabber:tzafrir at jabber.org
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com       
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir

Tzafrir Cohen wrote:
> On Mon, Aug 20, 2007 at 09:23:20PM -0400, Jerry Geis wrote:
>   
>> I have a TE405/TE410P card that was working on 1.0.X
>>
>> I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and zaptel to 
>> 1.4.5 and libpri.
>>
>> I copied all the zaptel and zapata and extensions.conf files from 1.0
>>
>> I did update extensions.conf from 1.0 to 1.4 commands.
>>
>> I cannot get the card to work in 1.4.10. AHHH!
>>
>> I see with zttool that the T1 is in Green, I see calls coming in as the
>> bits go high on channel 8,
>> zaptel doesnt respond so it tries channel 7 then gives up.
>>
>> Any ideas what this might be??? zaptel modules load, asterisk loads. 
>> ztcfg gives correct reply
>> everything looks good just not working.
>>     
>
> What is the output of a call trace from the CLI:
>
> core set verbose 3
>
>
> And report what you see when you try to call out.
>
>   
Good advice.  Also try pri intense debug span X. 

Before any of that, replace your T1 cable, especially if it is home made 
job.  It is always surprising how much time I have wasted on something, 
when just swapping out a new cable fixed it instantly.

Thanks,
Steve Totaro

>Tzafrir Cohen wrote:
>>/ On Mon, Aug 20, 2007 at 09:23:20PM -0400, Jerry Geis wrote:
/>>/   
/>>>/ I have a TE405/TE410P card that was working on 1.0.X
/>>>/
/>>>/ I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and
zaptel to
/>>>/ 1.4.5 and libpri.
/>>>/
/>>>/ I copied all the zaptel and zapata and extensions.conf files from
1.0
/>>>/
/>>>/ I did update extensions.conf from 1.0 to 1.4 commands.
/>>>/
/>>>/ I cannot get the card to work in 1.4.10. AHHH!
/>>>/
/>>>/ I see with zttool that the T1 is in Green, I see calls coming in
as the
/>>>/ bits go high on channel 8,
/>>>/ zaptel doesnt respond so it tries channel 7 then gives up.
/>>>/
/>>>/ Any ideas what this might be??? zaptel modules load, asterisk
loads.
/>>>/ ztcfg gives correct reply
/>>>/ everything looks good just not working.
/>>>/     
/>>/
/>>/ What is the output of a call trace from the CLI:
/>>/
/>>/ core set verbose 3
/>>/
/>>/
/>>/ And report what you see when you try to call out.
/>>/
/>>/   
/>Good advice.  Also try pri intense debug span X. 
>Before any of that, replace your T1 cable, especially if it is home made 
>job.  It is always surprising how much time I have wasted on something, 
>when just swapping out a new cable fixed it instantly.
>Thanks,
>Steve Totaro
Guys,

THanks for the reply. Last night tried backing down to 1.2, didnt work,
I then backed down to 1.0 and that is working.

If I can get back in and get time I will try 1.4 again the above commands.

Was really disappointed 1.4 didnt just work.

The customer also has a cisco call manager so I may just try and migrate them to
SIP.

Thanks again, hope I have a chance to at least try the commands above and see
what it says.

Jerry


-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20070821/3dca8aa6/attachment.htm