search for: te405

Hi, Is it possible to use 4 TE405 boards in one server ? It mean, to have 16 E1s on just one server. Can somebody tell me how many boards is it possible to have on one server ? Thanks, -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060...

I have a TE405/TE410P card that was working on 1.0.X I upgraded the OS to Centos 4.5, Updated asterisk to 1.4 and zaptel to 1.4.5 and libpri. I copied all the zaptel and zapata and extensions.conf files from 1.0 I did update extensions.conf from 1.0 to 1.4 commands. I cannot get the card to work in 1.4.10. A...

Hello ! I 've some questions how bridging of ISDN calls is done. Assume an asterisk system with a TE405 card equipped. (PRI1 - PRI4) An incoming ISDN call on PRI1 is transfered back to PRI3. Unless there is DTMF detection or other things involved, the bridging is done without Asterisk. Does this card have a some sort of cross connection ? Does the PCM leave the card ? Or is there some DMA magic in- v...

Hello asterisk-users, I have solved interconnection between Digium TE405 and Matra PBX. I plug this card to another computer and with the same configuration parameters card now works without problem. First server has 2xPIII/1GHz and 256MB of RAM, Adaptec SCSI adapter and SCSI system disk. I don't know now, what chipset it was, but mainboard was from Supermicro, the...

Hello asterisk-users, I have problem with E1 line between Asterisk computer and our PBX Matra: asta*CLI> pri show span 1 Primary D-channel: 16 Status: Provisioned, Down, Active Switchtype: EuroISDN Type: CPE Window Length: 0/7 Sentrej: 0 SolicitFbit: 0 Retrans: 0 Busy: 0 Overlap Dial: 0 T200 Timer: 1000 T203 Timer: 10000 T305 Timer: 30000 T308 Timer: 4000 T313 Timer: 4000 N200 Counter: 3 My

...er PRI > > On Tuesday 21 March 2006 15:09, Michael Gaudette wrote: > > How should I consider Fax over PRI channels with Asterisk? Is the > > quality and reliability good, or should I be prepared for alot of grief? > > I'm having good success doing fax over PRI using a TE405; one span to the > PRI, the other to an FXS channel bank that is almost obscenely > underutilized > (3 channels). > > I also have channel bank - T100P - IAX2 - TE405 - PRI, where the IAX2 link > is a 1-hop SDSL (VOIP only) data link. This works well too. > > -A. > ____...

Dear All, I am currently have this problem in which I am sending call out from the Zaptel TE405 to a VoIP gateway. But the problem that the call over to the VoIP Gateway will always have a fake ring tone. Can you please give some pointer how to fix this problem? This problem is existing in my Asterisk 1.2.1 box. Also when compiling Asterisk 1.2.5 and tried to run it with the Asterisk-addo...

Did anybody know, Is it possible to establish a ISDN DIAL up Connection and Analog Dial up Connection (V90) trough asterisk with Digium TE405? Thanks a lot for help. Nico Giefing -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060328/3b657058/attachment.htm

...; this list. I *am* currently writing up a how to, and will post it as soon as > I'm done. > > Basically, take the line from the meridian, and chop the rj45 off. (!) put > another RJ45 on, but with the wires crossed (IOW a cross over cable). Plug > the meridian into span 2 of the TE405. Take another cable, and plug from > span 1 of the TE405 into the PRI line. sorry for my other rambling. thought you were looking for status of meridian stations > > Make span 1 think it's a pri_cpe , and span 2 a pri_net and you're > laughing. Define zap/g1 as the list of...

...bps. Normally G.703 lines with G.704 framing is called Structured G.703. Carriers offer G.704 when their network is built up on a cross-connect basis, and will offer unstructured G.703 when their infrastructure is based upon multiplexers." But, what about Asterisk and Digium TDM interface TE405/TE410 ? Does it support Structured and Unstructured framing? Which one do you recommend? Thanks in advance -- Alex G Robertson NOC - Microlink

worked came to one ring only now. Thank you very much. If I use TE410 or TE405 instead of X100P. do it make that first ring disappear? Shakil -----Original Message----- From: tony@softins.clara.co.uk [mailto:tony@softins.clara.co.uk] Sent: Tuesday, April 20, 2004 12:27 PM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Re: Auto Answering PSTN --> Asterisk u...

I was playing around with the Flash Operator Panel, and came smack into a brick wall. We have a * box linked to a legacy Meridian System using a EuroIDSN link (TE405p) with 10 channels enabled. I also have several SIP extensions. What I wanted to do was to have a button for each of our (say) 32 users, 5 of which are on SIP. That leaves the other 27 on Zap. A potential of 27 users on 10 channels doesn't go, but we rarely have more than 8 channels in use...

...linux 2.6? I ask, because I spent yesterday giving it a whirl, and everything seems to go just fine till the very last minute. Zaptel, libpri and asterisk compile just fine. The drivers load, ztcfg runs, all seems well - asterisk even runs just fine. But while the freshmaker boards run fine, the te405 boards refuse to come out of red alarm. So my question: is my time wasted or should 2.6 support be working, and I've just got a problem that I need to fix? Thanx Clint

I have a channelized T1 coming in from our telco, terminated onto a TE405. There are three channelbanks serving internal analog extensions, and about 10 Cisco 7960s. I have no reports of echo on the analog extensions (as expected). The 7960 users complain of occasional echo (seems like 1 in 5 calls). Only the SIP user hears the echo, not the caller. I have echocancel...

Hello, I'm looking at building a couple new PRI Gateway boxes using TE405P cards, and was wondering if anyone has had any experiences (good or bad) with the Intel SE7210TP1_E motherboards from Intel. General Technics builds some really nice (and cost effective) 1U servers based on the board: Server: http://www.gtweb.net/gt637.html Specs: http://www.gtweb.net/support...

...Cisco 7960) I've been making a call from my mobile to the office, when, suddenly the conversation is terminated and replaced by a "fax-type" sound. This has happened to me several times over the past year, so it's not the version of asterisk (we've had cvs trunk and digium TE405 cards running when this has happened as well). I've never been able to figure it out. Today, I was speaking to my wife (I made the call outbound from the office to home) and the call went dead. I tried to redial, but kept getting the engaged tone. I fired up the * cli, and noticed that ther...

...ap/" on them, but couldn't find anything in the output which made me go "All idle/busy channels have this, and all blocked ones have that". When asterisk is trying to call out via one of these blocked channels, it returns the dreaded CONGESTION status. Of course, reloading the (TE405/TE410) card drivers and zaptel drivers unlocked everything, but nothing in the asterisk CLI did the same. I'm very confused about this one, and am stuck with it for some time now. If anybody has an idea on what to do (except filing a bug with Digium) or a hint what I could/should try, let me...

...i, I would like to realize a voip testbed that should simulate the scenario in which two companies have an asterisk PBX connected through a PRI-ISDN to the Telco operator. I have no experience of T1/E1 connection but I think that the above could be relized with 3 asterisk boxes equipped with Digium TE405P cards. One of the box will represent the Telco, the other two, the two companies PBX. I would like to know if it is needed something between the point-point connections or it is possible to just cross-connect them. I need the testbed to be representative of the real-world difficulties in putting o...

Does anyone know if the E1 cards that digium sells work in India. Also are there any distributers for those cards in India. By E1 cards I mean E100P, TE410P or TE405P -- regards Vikram (http://www.vicramresearch.com)

Hello, I'm very new with * and I would really appreciate some help to implement a SIP to PSTN Gateway. My current scenario includes an * box with a TE405P board. I have a 1.5Mb connection to the outside world (using a router with firewall capabilities) and channel banks that allow me to connect the T1s coming out of the TE405 board to PSTN network (carrier). I need to configure * to accept calls coming over IP (SIP) and terminate them thru the Zapt...