search for: te410p

hi guys, do you have any suggestions on how to connect 2 TE410P via E1? (for simulation and testing purposes) asterisk1 --> TE410P ----> ? ---------> ? ---->TE410P -->asterisk2 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030907/698cd499/attachme...

List, I have a TE410P (T1 mode, all PRI) and a T100P (fxoks, for fxs channel bank). I cannot seem to get the T100P to send any clock to the channel bank. I prefer that it use the same clock source as the TE410P, but it doesn't matter if it's not in sync just as long as it's there. The TE410P is configured...

I have a TE410P running on CentOS 4 which (fortunately) is my test system. This card has been working flawlessly for the past few weeks. Today I did a cvs update to the latest head files, and the card is now not working. When I try a zaptel start, a series of messages appears on the console: Found TE410p at b...

Hi, I found E400P quad PRI card quite cheap (749USD): http://www.govarion.com/product_info.php?cPath=1&products_id=2&osCsid=68cdd6e3d08754 in comparison to te410p (approx 1500 USD ) http://www.digium.com/index.php?menu=product_detail&category=hardware&product=TE410P Now newer generation with HW echo canceling emerged (te411p). I'm not sure in what things those two cards differ and what would be best option to buy (I believe there is big perfo...

...rrect thing to do? Config files are below. Thanks Mark Vickers RealNetworks, Inc. ____________________________________________________________ root@asterisk:~# /sbin/modprobe zaptel root@asterisk:~# /sbin/modprobe wct4xxp From dmesg: Zapata Telephony Interface Registered on major 196 Found TE410P at base address fc200000, remapped to e088f000 TE410P version c01a003a, burst ON FALC version: 00000005, Board ID: 00 Reg 0: 0x1b96b800 Reg 1: 0x1b96b000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a003a Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff0000 R...

I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting slips and ask me to update the clock source. I have my system.conf set as the following but when I run dahdi_scan only the ports on Card 1 are showing up with syncsrc=1 system.conf : span=1,1,0,esf,b8zs bchan=2-24 mtp2=1 span=2,2,0,esf,b8zs bchan...

Hi, after loading the zaptel driver wct4xxp I have strange log lines in the syslog: Out of storage space. free tells, that more than 900 MB are still free. Disk space is also available. I'm using a dual opteron in 64 bit mode. Any ideas? Roger. Syslog: Dec 1 02:18:37 ipphone4 kernel: TE410P: Launching card: 0 Dec 1 02:18:37 ipphone4 kernel: TE410P: Setting up global serial parameters Dec 1 02:18:38 ipphone4 kernel: Found a Wildcard: Wildcard TE410P-Xilinx Dec 1 02:18:38 ipphone4 kernel: Registered tone zone 2 (France) Dec 1 02:18:38 ipphone4 kernel: TE410P: Span 1 configured for C...

...meone shed some light on this? Thanks, -Sid Module Size Used by Not tainted wcusb 20128 0 (unused) wct4xxp 54272 0 (unused) zaptel 182432 0 [wcusb wct4xxp] tail -f /var/log/messages Jan 6 14:54:32 localhost kernel: TE410P: Launching card: 0 Jan 6 14:54:32 localhost kernel: TE410P: Setting up global serial parameters Jan 6 14:54:32 localhost kernel: Found a Wildcard: Wildcard TE410P-Xilinx Jan 6 14:54:32 localhost kernel: usb.c: registered new driver wcusb Jan 6 14:54:32 localhost kernel: Wildcard USB FXS Interfa...

Hi- I have posted a photo of the TE410P Digium card on my site, so that those wishing to purchase a compatible motherboard can see physically what the PCI slot requirement is: http://www.evtmedia.com/TE410P.htm I believe the required slot is a 64-bit, 3.3 Volt PCI, most commonly found on Xeon-based motherboards. A 64-bit slot is longe...

Max TE410P card on an Asterisk Hello, Does anybody know the max number of TE410P/TE405P card we can put in an asterisk box? Thanks. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/f220d3ae/attachment.htm

Hi to all out there using HP DL380 G4 servers, i found a way to get the Digium TE410P with older firmware running on a HP-Compaq DL380 G4 Server! Here's the step-by-step description: 1. download the latest BIOS (in my case it was 4.04 from date: 06/02/2005) for the HP-Compaq DL380 G4 using the "Systems ROMPaq Firmware Upgrade Diskette for HP ProLiant DL480 G4 (P51) Servers...

...h asterisk. is the following scenario possible and stable enough for production? FYI : We want to build a unified messaging application integrated with SIP. We have an E1 connection in Belgium with 100 msn's We would think about having 2 servers : Server A : Asterisk PRI card (Digium TE410P) Server B : Fax server PRI card (Eicon PRI30M) Call ---> TE410P/1 ---> Asterisk Extension ---> Voice ? ---> Voicemail or Dial Fax ? ---> TE410P/2 crossover to ---> Server B (Eicon PRI) Michael DISCLAIMER: The content of this e-mail message does not c...

...down Mar 22 01:33:09 WARNING[114696]: chan_zap.c:5970 zt_pri_error: PRI: !! Got S-frame while link down == D-Channel on span 1 up and certain IRQ misses like around 270 after an operation of 2-3 hours. Further when I load the T/E410p card I get this error ... Mar 22 00:33:48 VoiceOne kernel: TE410P: Launching card: 0 Mar 22 00:33:48 VoiceOne kernel: TE410P: Setting up global serial parameters Mar 22 00:33:48 VoiceOne kernel: TE410P: Timing from source 0 Mar 22 00:33:48 VoiceOne kernel: Found a Wildcard: Wildcard TE410P-Xilinx Mar 22 00:33:48 VoiceOne kernel: Registered tone zone 0 (United Sta...

TE410P card down. I have three (3) TE410P in one machine running asterisk with SS7. My problems started last week when one of my cards started switching to E1 every time after reboot. I set the following in dahdi.conf and that solve the problem. /etc/modprobe.d/ options wct4xxp t1e1override=0x00 No...

Hi, Has anyone had success using a TE410P card in an HP-Compaq DL380 G4 server? For me the card is detected fine, but the system just never sees an interrupt from the card. I've tried everything I can think of. The card definitely works. Its Fedora Core, but we also tried a stock 2.6.10 kernel. We tried with and without Hypert...

...,hdb3,crc4 span=2,1,0,ccs,hdb3,crc4 span=3,0,0,ccs,hdb3,crc4 span=4,0,0,ccs,hdb3,crc4 loadzone = us defaultzone= us -------------------------------------- When i modprobe wct4xxp, -------------------------------------- PCI: Found IRQ 11 for device 02:0b.0 PCI: Sharing IRQ 11 with 00:1d.7 Found TE410P at base address ed800000, remapped to e0951000 TE410P version c01a009b FALC version: 00000005, Board ID: 00 Reg 0: 0x1ad4b800 Reg 1: 0x1ad4b000 Reg 2: 0x07fc07fc Reg 3: 0x00000000 Reg 4: 0x00000000 Reg 5: 0x00000000 Reg 6: 0xc01a009b Reg 7: 0x00001000 Reg 8: 0x00000000 Reg 9: 0x00ff0000 Reg 10: 0x0...

TE410P - one way audio, after "rpm -qa" on RedHat 9 After much trouble, I can consistently reproduce this error. Anyone have any idea why all Zap channels on my TE410P would develop one way audio after "rpm -qa" has been run while asterisk is running? If I reboot, run "rpm -qa&...

Has anyone else experienced a problem with the LED for span 1 on a TE410P or TE405P? I had a TE410P on which the span 1 LED would not light red, but once the span was connected, it did correctly light green. I RMAed the board to our UK distrbutor and received a replacement. However, the replacement board displayed the same problem! Wondering if it was related to the c...

Dear List i have upgrade my * box with the latest CVS version of Asterisk Stable 1.0 and zaptel/libpri my system is MDK9.2 with 1 TE410P and seems work well for now but i have a little amount of traffic (25 IN/OUT calls) i only notice this Warning.. What kind of error is? ------------------------------- Apr 20 21:28:49 WARNING[147466]: chan_zap.c:5979 zt_pri_error: PRI: !! Got reject for frame 111, retransmitting frame 111 now,...

I am planning to buy Dell 2650 server with dual Xeon processors. And I would like to buy two TE410P cards for PCI with 3,3v. This is on Dell site about PCI slots for Dell 2650 server: 3 PCI-X (1x64-bit/133MHz, and 2x64-bit/100MHz) Does that mean I will be able to buy two TE410P cards ? Or I need to buy two TE405P cards ? Thanks for help. bartek