Displaying 20 results from an estimated 694 matches for "ztcfg".
2005 Jul 20
3
Junghanns quadBRI on Dell PowerEdge
...tainted.
Jul 19 17:15:55 ustredna kernel: qozap: Junghanns.NET quadBRI card
configured at mem 0xf8836000 IRQ 77 HZ 1000
CardID 0
Jul 19 17:15:55 ustredna kernel: qozap: S/T ports: 4 [ TE TE TE TE ]
Jul 19 17:15:55 ustredna kernel: qozap: 1 multiBRI card(s) in this box,
4 BRI ports total.
Running ztcfg:
Jul 19 17:15:56 ustredna ztcfg:
Jul 19 17:15:56 ustredna ztcfg: SPAN 1: CCS/ AMI Build-out: 399-533 feet
(DSX-1)
Jul 19 17:15:56 ustredna ztcfg: SPAN 2: CCS/ AMI Build-out: 399-533 feet
(DSX-1)
Jul 19 17:15:56 ustredna ztcfg: SPAN 3: CCS/ AMI Build-out: 399-533 feet
(DSX-1)
Jul 19 17:15:56 ustr...
2007 Feb 21
3
Zaptel 1.4.0
I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make
install and I don't see any errors. This is out of my modprobe.conf:
install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg
install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg
install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg
install wcfxo /sbin/modprobe --ignore-install wcfxo && /sbin/ztcfg
install wctdm /sbin/modprobe --ignore-install wctdm && /...
2003 Oct 07
5
auto 'modprobe wct1xxp' on startup?
...tup, it appears) uses /etc/modules.conf,
and here's what mine looks like:
alias eth0 e1000
alias scsi_hostadapter megaraid
alias usb-controller ehci-hcd
alias usb-controller1 usb-uhci
options torisa base=0xd0000
alias char-major-196 torisa
#post-install wcfxs /sbin/ztcfg
#post-install wcfxsusb /sbin/ztcfg
#post-install torisa /sbin/ztcfg
#post-install tor2 /sbin/ztcfg
#post-install wcfxo /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
#post-install wct4xxp /sbin/ztcfg
(I commented out all of the modules I think I don't need, but it didn...
2004 May 10
1
ztcfg and Aastra 390 phones
I am wandering if anyone can explain this unusual scenario. I am running
Asterisk on Fedora. After the box boots, I run insmod wcfxs at a command
line. The phones keep the red message light on and are in a state like
they are not recognized yet. If I then run the command ztcfg, I don't get
anything after the command, meaning that everything should be OK in zapata
and zaptel confs and the red message lights go out and the phones are in a
ready state.
Sorry if my explanation is screwy. It just seems weird that the phones
dont go ready until I run ztcfg. Is there any...
2007 Oct 26
3
Need to run ztcfg manually?
I have a new asterisk system with a T1 card. It appears that running "ztcfg
-vv " is required in order for asterisk to start properly.
Is this correct? Are people adding this command to the asterisk startup
script?
Thanks
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/...
2009 Jun 11
2
In Dahdi: what we use instead of /sbin/ztcfg -vv
Hi All;
In dahdi: what we use instead of ztcfg -vv (that is existed /sbin/ztcfg -vv).
?
Regards
Bilal
2005 Sep 01
2
ztcfg problem
Hi all,
I'm installing two HFC pci card (both in TE mode), I don't have problem
when load module, but whrn I give "ztcfg -vv", I see 6 the six channels
that I configured, then my computer hang and I have to reboot it. (I'm
using a VIA Epia-M 1000 with Via C3 processor)
root@test:~# modprobe zaptel
root@test:~# insmod /usr/src/bristuff-0.2.0-RC8n/zaphfc/./zaphfc.o
root@test:~# ztcfg -vv
Zaptel Conf...
2004 Dec 31
2
FC2 & ztcfg - cannot find channel 2
When I try to start up zaptel, whilst running ztcfg, I get the following
error:
Jan 1 10:48:18 bu ztcfg: ZT_CHANCONFIG failed on channel 2: No such device or address (6)
My /etc/zaptel.conf is:
fxsks=1
fxoks=2
loadzone = au
defaultzone=au
Channel 1 is a X101P card connected to the PSTN and channel 2 is a S100U
box driving an analogue phone.
Th...
2005 Aug 12
2
Possibly bad FXS module in TDM400P?
I've got the latest zaptel and cvs asterisk software loaded on my phone
server running FC3. And yes, It's fully updated and udev is setup
correctly. I've got a TDM400P with one FXS and one FXO module
installed. When I load zaptel and wctdm and run ztcfg -vvv, I get this:
[root@asterisk ~]# ztcfg -vvv
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
Zaptel Configuration
======================
Channel map:
Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXS Kewlstart (Default) (Slaves: 02)
2 channels configured.
R...
2003 Feb 28
2
error in tor2
i have error in install module of tor2.
but it compile good.
what happen ?
ivr2:/usr/src/zaptel # make clean; make install
rm -f torisatool makefw tor2fw.h
rm -f zttool
rm -f *.o ztcfg tzdriver sethdlc
rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo
rm -f gendigits tones.h
rm -f libtonezone*
rm -f tor2ee
rm -f core
cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o gendigits.o gendigits.c
cc -o gendigits gendigits.o -lm
./gendigits
gcc -I/usr/src/linux-2....
2003 Jul 14
2
insmod wcfxo failed ( b8zs, esf, wink start is what I'm trying to do.)
...transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
root@asterisk01:~#
root@asterisk01:~# cat /etc/modules.conf
options torisa base=0xd0000
alias char-major-196 torisa
post-install tor2 /sbin/ztcfg
post-install wcfxo /sbin/ztcfg
post-install wct1xxp /sbin/ztcfg
post-install wcfxs /sbin/ztcfg
post-install wcfxsusb /sbin/ztcfg
post-install torisa /sbin/ztcfg
post-install wct4xxp /sbin/ztcfg
root@asterisk01:~#
root@asterisk01:~# lsmod
Module Size Used by Not tainted
zaptel...
2006 Jan 08
2
Zaptel make install error
/bin/sh: -c: line 0: syntax error near unexpected token `;'
/bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm /sbin/ztcfg" > ; if ! grep "options torisa" ; then echo "options torisa base=0xd0000" >> ; fi; if ! grep "alias char-major...
2003 Jun 12
1
fxs card not loading in new computer
...(Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
2 channels configured.
ZT_CHANCONFIG failed on channel 1: No such device or address (6)
__________________________________________________
So I made sure that the fxo is loaded first. Now it complains on channel 2.
I also ran ztcfg -vv but no diff. So I ran dmesg which shows
Zapata Telephony Interface Registered on major 196
No ISA tormenta card found at d0000
Zapata Telephony Interface Unloaded
a few times. And:
Zapata Telephony Interface Registered on major 196
PCI: Assigned IRQ 10 for device 00:06.0
Found a Wildcard FX...
2006 Oct 27
2
0 channels configured with tdm400 (tdm04b rev. G)
Hi,
Some weird problem (or I'm too sleepy) happens with a tdm04B revision G (4fxo)
Steps:
modprobe zaptel
modprobe wctdm
ztcfg -vv
/etc/zaptel.conf
fxsls=1-4 # TDM04B
defaultzone=us
loadzone=us
/etc/asterisk/zapata.conf
signalling=fxs_ls
group=1
context=incoming
channel => 1-4
modprobe zaptel and wctdm load fine, however ztcfg -vv shows:
0 channels configured
Im using centos 4.4 with
Asterisk Version 1.2.13
Zaptel V...
2005 Jun 13
2
ztcfg server crash
I was wondering if anyone had experienced the following with asterisk stable.
After a period of time (can vary), If I stop asterisk and try to run ztcfg -v to reinitialise my quad e1 card, the server will lock up. Sometimes it's
a complete lockup, where it won't even return pings, other times it seems to be "partially screwed".
--
==========================================
Rod Bacon
Empowered Communications
Ground Floor, 102 Y...
2004 Dec 19
0
ztcfg seg faulting
I am running * in a development environment, adding functionality as I
go.
The * box has a X100P card in it which ztcfg enabled as channel 1 with
fxsks signalling (fxsks=1).
Everything worked fine and I was able to make inbound and outbound calls
to/from the PSTN, the only issue being that some exchanges wouldn't
handle the dtmf signalling, but I put that down to a peculiarity with
some AU exchanges and I was a...
2009 Sep 27
3
Problems with Digium TDM400 card
I had a working Asterisk 1.4.24.1 installation on SUSE 9 Linux but SIP only. I then downloaded and installed latest Zaptel and could not get Zaptel working. So I downloaded Asterisk again and re-installed.
But still problems:
Here is my ztcfg output:
asterisk:/etc/asterisk # ztcfg -vvvvv
Notice: Configuration file is /etc/zaptel.conf
line 4: Unable to read Zaptel version information.
Zaptel Version: Unknown
Echo Canceller: Unknown
Configuration
======================
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
Chan...
2005 Jun 27
2
R: zaphfc: empty HDLC frame or bad CRC received
...* 1 Port HFC Card
I got that messages about HDLC Framing errors. It ended up being the way I loaded the required kernel modules.
1) Remove or comment "install" lines in /etc/modprobe.conf (or modules.conf), regarding the kernel modules for the TDM and the HFC Card. They usually launch ztcfg.
2) In the init script, load both modules manually (modprobe wcfxs zaphfc)
3) Issue the ztcfg command
4) Load asterisk
That way it worked without problems.
Julian J. M.
On 6/27/05, David Masure <d.masure@ucr.fr> wrote:
>
>
> Hi all,
>
> I'm using asterisk 1.0.6...
2006 Oct 11
1
Problem with ZAPTEL-1.4.0-beta1 and WCT100P card
...41 Sep 21 13:25 asterisk-1.4.0-
beta2.tar.gz
-rw-r--r-- 1 root root 993921 Sep 21 13:25 asterisk-addons-1.4.0-
beta1.tar.gz
-rw-r--r-- 1 root root 80019 Sep 21 13:25 libpri-1.4.0-beta1.tar.gz
-rw-r--r-- 1 root root 1523413 Sep 21 13:25 zaptel-1.4.0-beta1.tar.gz
I get an error when I run ztcfg. (see below). Any ideas? Is the
ztcfg issue with unable to read version info a problem?
[root@asterisk-1 src]# ztcfg -d 99 -v
Line 11: span=1,1,1,esf,b8zs
Line 12: bchan=1-23
Line 13: dchan=24
Line 17: loadzone = us
Line 18: defaultzone = us
<End of File>
Notice: Configuratio...