Its pretty important to uderstand also what your doing..
So.
Read this one, good explained.
https://www.howtoforge.com/tutorial/debian-samba-server/
and/or bit less explained but more setups examples.
http://www.server-world.info/en/note?os=Debian_8&p=samba
Here some more options to use ( see in the right corner, top )
And ignore the japanise characters, its mostly explained in english.
Greetz,
Louis
Van: Douglas Holden [mailto:icedash at yahoo.com]
Verzonden: dinsdag 15 maart 2016 14:23
Aan: L. P. H. van Belle
Onderwerp: Re: [Samba] Installing onto Windows
I don't know how to set up Samba.
What I did was type and enter "samba" in the Linux terminal.
Then Samba acknowledged my win Workgroup, on the other computer, but it timed
out.
Is everything done on the Linux side, to access Windows on another computer?
I've looked at install documentation on samba.org but did not understand it.
On Tuesday, March 15, 2016 5:51 AM, L. P. H. van Belle <belle at
bazuin.nl> wrote:
Since this is a standalone server.
Change
map to guest = bad user
to
map to guest = bad password
put the 2 pc's hostnames in the /etc/hosts file on the samba server.
Stop and start samba.
And it helps if
In smb.conf : workgroup = WORKGROUP and workgroup in windows are the same.
Can you access based on \\ip\share and \\hostname\share ?
Greetz,
Louis
> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens Rowland penny
> Verzonden: dinsdag 15 maart 2016 13:26
> Aan: sambalist
> Onderwerp: Re: [Samba] Installing onto Windows
>
> On 15/03/16 12:12, Douglas Holden wrote:
> > #
> > # Sample configuration file for the Samba suite for Debian GNU/Linux.
> > #
> > #
> > # This is the main Samba configuration file. You should read the
> > # smb.conf(5) manual page in order to understand the options listed
> > # here. Samba has a huge number of configurable options most of which
> > # are not shown in this example
> > #
> > # Some options that are often worth tuning have been included as
> > # commented-out examples in this file.
> > # - When such options are commented with ";", the proposed
setting
> > # differs from the default Samba behaviour
> > # - When commented with "#", the proposed setting is the
default
> > # behaviour of Samba but the option is considered important
> > # enough to be mentioned here
> > #
> > # NOTE: Whenever you modify this file you should run the command
> > # "testparm" to check that you have not made any basic
syntactic
> > # errors.
> >
> > #======================= Global Settings ======================>
>
> > [global]
> >
> > ## Browsing/Identification ###
> >
> > # Change this to the workgroup/NT-domain name your Samba server will
> > part of
> > workgroup = WORKGROUP
> >
> > # server string is the equivalent of the NT Description field
> > server string = %h server (Samba, Linux Mint)
> >
> > # Windows Internet Name Serving Support Section:
> > # WINS Support - Tells the NMBD component of Samba to enable its WINS
> > Server
> > # wins support = no
> >
> > # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT
> both
> > ; wins server = w.x.y.z
> >
> > # This will prevent nmbd to search for NetBIOS names through DNS.
> > dns proxy = no
> >
> > #### Networking ####
> >
> > # The specific set of interfaces / networks to bind to
> > # This can be either the interface name or an IP address/netmask;
> > # interface names are normally preferred
> > ; interfaces = 127.0.0.0/8 eth0
> >
> > # Only bind to the named interfaces and/or networks; you must use the
> > # 'interfaces' option above to use this.
> > # It is recommended that you enable this feature if your Samba machine
> is
> > # not protected by a firewall or is a firewall itself. However, this
> > # option cannot handle dynamic or non-broadcast interfaces correctly.
> > ; bind interfaces only = yes
> >
> >
> >
> > #### Debugging/Accounting ####
> >
> > # This tells Samba to use a separate log file for each machine
> > # that connects
> > log file = /var/log/samba/log.%m
> >
> > # Cap the size of the individual log files (in KiB).
> > max log size = 1000
> >
> > # If you want Samba to only log through syslog then set the following
> > # parameter to 'yes'.
> > # syslog only = no
> >
> > # We want Samba to log a minimum amount of information to syslog.
> > Everything
> > # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to
> log
> > # through syslog you should set the following parameter to something
> > higher.
> > syslog = 0
> >
> > # Do something sensible when Samba crashes: mail the admin a backtrace
> > panic action = /usr/share/samba/panic-action %d
> >
> >
> > ####### Authentication #######
> >
> > # Server role. Defines in which mode Samba will operate. Possible
> > # values are "standalone server", "member server",
"classic primary
> > # domain controller", "classic backup domain
controller", "active
> > # directory domain controller".
> > #
> > # Most people will want "standalone sever" or "member
server".
> > # Running as "active directory domain controller" will
require first
> > # running "samba-tool domain provision" to wipe databases
and create a
> > # new domain.
> > server role = standalone server
> >
> > # If you are using encrypted passwords, Samba will need to know what
> > # password database type you are using.
> > passdb backend = tdbsam
> >
> > obey pam restrictions = yes
> >
> > # This boolean parameter controls whether Samba attempts to sync the
> Unix
> > # password with the SMB password when the encrypted SMB password in
the
> > # passdb is changed.
> > unix password sync = yes
> >
> > # For Unix password sync to work on a Debian GNU/Linux system, the
> > following
> > # parameters must be set (thanks to Ian Kahan
> > <<kahan at informatik.tu-muenchen.de> for
> > # sending the correct chat script for the passwd program in Debian
> Sarge).
> > passwd program = /usr/bin/passwd %u
> > passwd chat = *Enter\snew\s*\spassword:* %n\n
> > *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
> >
> > # This boolean controls whether PAM will be used for password changes
> > # when requested by an SMB client instead of the program listed in
> > # 'passwd program'. The default is 'no'.
> > pam password change = yes
> >
> > # This option controls how unsuccessful authentication attempts are
> mapped
> > # to anonymous connections
> > map to guest = bad user
> >
> > ########## Domains ###########
> >
> > #
> > # The following settings only takes effect if 'server role =
primary
> > # classic domain controller', 'server role = backup domain
controller'
> > # or 'domain logons' is set
> > #
> >
> > # It specifies the location of the user's
> > # profile directory from the client point of view) The following
> > # required a [profiles] share to be setup on the samba server (see
> > # below)
> > ; logon path = \\%N\profiles\%U
> > # Another common choice is storing the profile in the user's home
> > directory
> > # (this is Samba's default)
> > # logon path = \\%N\%U\profile
> >
> > # The following setting only takes effect if 'domain logons'
is set
> > # It specifies the location of a user's home directory (from the
client
> > # point of view)
> > ; logon drive = H:
> > # logon home = \\%N\%U
> >
> > # The following setting only takes effect if 'domain logons'
is set
> > # It specifies the script to run during logon. The script must be
stored
> > # in the [netlogon] share
> > # NOTE: Must be store in 'DOS' file format convention
> > ; logon script = logon.cmd
> >
> > # This allows Unix users to be created on the domain controller via
> > the SAMR
> > # RPC pipe. The example command creates a user account with a
> > disabled Unix
> > # password; please adapt to your needs
> > ; add user script = /usr/sbin/adduser --quiet --disabled-password
> > --gecos "" %u
> >
> > # This allows machine accounts to be created on the domain controller
> > via the
> > # SAMR RPC pipe.
> > # The following assumes a "machines" group exists on the
system
> > ; add machine script = /usr/sbin/useradd -g machines -c "%u
machine
> > account" -d /var/lib/samba -s /bin/false %u
> >
> > # This allows Unix groups to be created on the domain controller via
> > the SAMR
> > # RPC pipe.
> > ; add group script = /usr/sbin/addgroup --force-badname %g
> >
> > ############ Misc ############
> >
> > # Using the following line enables you to customise your configuration
> > # on a per machine basis. The %m gets replaced with the netbios name
> > # of the machine that is connecting
> > ; include = /home/samba/etc/smb.conf.%m
> >
> > # Some defaults for winbind (make sure you're not using the ranges
> > # for something else.)
> > ; idmap uid = 10000-20000
> > ; idmap gid = 10000-20000
> > ; template shell = /bin/bash
> >
> > # Setup usershare options to enable non-root users to share folders
> > # with the net usershare command.
> >
> > # Maximum number of usershare. 0 (default) means that usershare is
> > disabled.
> > ; usershare max shares = 100
> >
> > # Allow users who've been granted usershare privileges to create
> > # public shares, not just authenticated ones
> > usershare allow guests = yes
> >
> > #======================= Share Definitions ======================>
>
> > # Un-comment the following (and tweak the other settings below to
suit)
> > # to enable the default home directory shares. This will share each
> > # user's home directory as \\server\username
> > ;[homes]
> > ; comment = Home Directories
> > ; browseable = no
> >
> > # By default, the home directories are exported read-only. Change the
> > # next parameter to 'no' if you want to be able to write to
them.
> > ; read only = yes
> >
> > # File creation mask is set to 0700 for security reasons. If you want
to
> > # create files with group=rw permissions, set next parameter to 0775.
> > ; create mask = 0700
> >
> > # Directory creation mask is set to 0700 for security reasons. If you
> > want to
> > # create dirs. with group=rw permissions, set next parameter to 0775.
> > ; directory mask = 0700
> >
> > # By default, \\server\username shares can be connected to by anyone
> > # with access to the samba server.
> > # Un-comment the following parameter to make sure that only
"username"
> > # can connect to \\server\username
> > # This might need tweaking when using external authentication schemes
> > ; valid users = %S
> >
> > # Un-comment the following and create the netlogon directory for
> > Domain Logons
> > # (you need to configure Samba to act as a domain controller too.)
> > ;[netlogon]
> > ; comment = Network Logon Service
> > ; path = /home/samba/netlogon
> > ; guest ok = yes
> > ; read only = yes
> >
> > # Un-comment the following and create the profiles directory to store
> > # users profiles (see the "logon path" option above)
> > # (you need to configure Samba to act as a domain controller too.)
> > # The path below should be writable by all users so that their
> > # profile directory may be created the first time they log on
> > ;[profiles]
> > ; comment = Users profiles
> > ; path = /home/samba/profiles
> > ; guest ok = no
> > ; browseable = no
> > ; create mask = 0600
> > ; directory mask = 0700
> >
> > [printers]
> > comment = All Printers
> > browseable = no
> > path = /var/spool/samba
> > printable = yes
> > guest ok = no
> > read only = yes
> > create mask = 0700
> >
> > # Windows clients look for this share name as a source of downloadable
> > # printer drivers
> > [print$]
> > comment = Printer Drivers
> > path = /var/lib/samba/printers
> > browseable = yes
> > read only = yes
> > guest ok = no
> > # Uncomment to allow remote administration of Windows print drivers.
> > # You may need to replace 'lpadmin' with the name of the group
your
> > # admin users are members of.
> > # Please note that you also need to set appropriate Unix permissions
> > # to the drivers directory for these users to have write rights in it
> > ; write list = root, @lpadmin
> >
> >
> >
>
> OK, that looks very much like the default smb.conf, have you actually
> set up Samba ?
> Are the 'smbd', 'nmbd' and 'winbind' deamons
running, or to put it
> another way, have you started them ?
>
> Rowland
>
> --
> To unsubscribe from this list go to the following URL and read the
> instructions: https://lists.samba.org/mailman/options/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba