On 15/03/16 12:12, Douglas Holden wrote:> #
> # Sample configuration file for the Samba suite for Debian GNU/Linux.
> #
> #
> # This is the main Samba configuration file. You should read the
> # smb.conf(5) manual page in order to understand the options listed
> # here. Samba has a huge number of configurable options most of which
> # are not shown in this example
> #
> # Some options that are often worth tuning have been included as
> # commented-out examples in this file.
> # - When such options are commented with ";", the proposed
setting
> # differs from the default Samba behaviour
> # - When commented with "#", the proposed setting is the default
> # behaviour of Samba but the option is considered important
> # enough to be mentioned here
> #
> # NOTE: Whenever you modify this file you should run the command
> # "testparm" to check that you have not made any basic syntactic
> # errors.
>
> #======================= Global Settings ======================>
> [global]
>
> ## Browsing/Identification ###
>
> # Change this to the workgroup/NT-domain name your Samba server will
> part of
> workgroup = WORKGROUP
>
> # server string is the equivalent of the NT Description field
> server string = %h server (Samba, Linux Mint)
>
> # Windows Internet Name Serving Support Section:
> # WINS Support - Tells the NMBD component of Samba to enable its WINS
> Server
> # wins support = no
>
> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
> ; wins server = w.x.y.z
>
> # This will prevent nmbd to search for NetBIOS names through DNS.
> dns proxy = no
>
> #### Networking ####
>
> # The specific set of interfaces / networks to bind to
> # This can be either the interface name or an IP address/netmask;
> # interface names are normally preferred
> ; interfaces = 127.0.0.0/8 eth0
>
> # Only bind to the named interfaces and/or networks; you must use the
> # 'interfaces' option above to use this.
> # It is recommended that you enable this feature if your Samba machine is
> # not protected by a firewall or is a firewall itself. However, this
> # option cannot handle dynamic or non-broadcast interfaces correctly.
> ; bind interfaces only = yes
>
>
>
> #### Debugging/Accounting ####
>
> # This tells Samba to use a separate log file for each machine
> # that connects
> log file = /var/log/samba/log.%m
>
> # Cap the size of the individual log files (in KiB).
> max log size = 1000
>
> # If you want Samba to only log through syslog then set the following
> # parameter to 'yes'.
> # syslog only = no
>
> # We want Samba to log a minimum amount of information to syslog.
> Everything
> # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
> # through syslog you should set the following parameter to something
> higher.
> syslog = 0
>
> # Do something sensible when Samba crashes: mail the admin a backtrace
> panic action = /usr/share/samba/panic-action %d
>
>
> ####### Authentication #######
>
> # Server role. Defines in which mode Samba will operate. Possible
> # values are "standalone server", "member server",
"classic primary
> # domain controller", "classic backup domain controller",
"active
> # directory domain controller".
> #
> # Most people will want "standalone sever" or "member
server".
> # Running as "active directory domain controller" will require
first
> # running "samba-tool domain provision" to wipe databases and
create a
> # new domain.
> server role = standalone server
>
> # If you are using encrypted passwords, Samba will need to know what
> # password database type you are using.
> passdb backend = tdbsam
>
> obey pam restrictions = yes
>
> # This boolean parameter controls whether Samba attempts to sync the Unix
> # password with the SMB password when the encrypted SMB password in the
> # passdb is changed.
> unix password sync = yes
>
> # For Unix password sync to work on a Debian GNU/Linux system, the
> following
> # parameters must be set (thanks to Ian Kahan
> <<kahan at informatik.tu-muenchen.de> for
> # sending the correct chat script for the passwd program in Debian Sarge).
> passwd program = /usr/bin/passwd %u
> passwd chat = *Enter\snew\s*\spassword:* %n\n
> *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
>
> # This boolean controls whether PAM will be used for password changes
> # when requested by an SMB client instead of the program listed in
> # 'passwd program'. The default is 'no'.
> pam password change = yes
>
> # This option controls how unsuccessful authentication attempts are mapped
> # to anonymous connections
> map to guest = bad user
>
> ########## Domains ###########
>
> #
> # The following settings only takes effect if 'server role = primary
> # classic domain controller', 'server role = backup domain
controller'
> # or 'domain logons' is set
> #
>
> # It specifies the location of the user's
> # profile directory from the client point of view) The following
> # required a [profiles] share to be setup on the samba server (see
> # below)
> ; logon path = \\%N\profiles\%U
> # Another common choice is storing the profile in the user's home
> directory
> # (this is Samba's default)
> # logon path = \\%N\%U\profile
>
> # The following setting only takes effect if 'domain logons' is set
> # It specifies the location of a user's home directory (from the client
> # point of view)
> ; logon drive = H:
> # logon home = \\%N\%U
>
> # The following setting only takes effect if 'domain logons' is set
> # It specifies the script to run during logon. The script must be stored
> # in the [netlogon] share
> # NOTE: Must be store in 'DOS' file format convention
> ; logon script = logon.cmd
>
> # This allows Unix users to be created on the domain controller via
> the SAMR
> # RPC pipe. The example command creates a user account with a
> disabled Unix
> # password; please adapt to your needs
> ; add user script = /usr/sbin/adduser --quiet --disabled-password
> --gecos "" %u
>
> # This allows machine accounts to be created on the domain controller
> via the
> # SAMR RPC pipe.
> # The following assumes a "machines" group exists on the system
> ; add machine script = /usr/sbin/useradd -g machines -c "%u machine
> account" -d /var/lib/samba -s /bin/false %u
>
> # This allows Unix groups to be created on the domain controller via
> the SAMR
> # RPC pipe.
> ; add group script = /usr/sbin/addgroup --force-badname %g
>
> ############ Misc ############
>
> # Using the following line enables you to customise your configuration
> # on a per machine basis. The %m gets replaced with the netbios name
> # of the machine that is connecting
> ; include = /home/samba/etc/smb.conf.%m
>
> # Some defaults for winbind (make sure you're not using the ranges
> # for something else.)
> ; idmap uid = 10000-20000
> ; idmap gid = 10000-20000
> ; template shell = /bin/bash
>
> # Setup usershare options to enable non-root users to share folders
> # with the net usershare command.
>
> # Maximum number of usershare. 0 (default) means that usershare is
> disabled.
> ; usershare max shares = 100
>
> # Allow users who've been granted usershare privileges to create
> # public shares, not just authenticated ones
> usershare allow guests = yes
>
> #======================= Share Definitions ======================>
> # Un-comment the following (and tweak the other settings below to suit)
> # to enable the default home directory shares. This will share each
> # user's home directory as \\server\username
> ;[homes]
> ; comment = Home Directories
> ; browseable = no
>
> # By default, the home directories are exported read-only. Change the
> # next parameter to 'no' if you want to be able to write to them.
> ; read only = yes
>
> # File creation mask is set to 0700 for security reasons. If you want to
> # create files with group=rw permissions, set next parameter to 0775.
> ; create mask = 0700
>
> # Directory creation mask is set to 0700 for security reasons. If you
> want to
> # create dirs. with group=rw permissions, set next parameter to 0775.
> ; directory mask = 0700
>
> # By default, \\server\username shares can be connected to by anyone
> # with access to the samba server.
> # Un-comment the following parameter to make sure that only
"username"
> # can connect to \\server\username
> # This might need tweaking when using external authentication schemes
> ; valid users = %S
>
> # Un-comment the following and create the netlogon directory for
> Domain Logons
> # (you need to configure Samba to act as a domain controller too.)
> ;[netlogon]
> ; comment = Network Logon Service
> ; path = /home/samba/netlogon
> ; guest ok = yes
> ; read only = yes
>
> # Un-comment the following and create the profiles directory to store
> # users profiles (see the "logon path" option above)
> # (you need to configure Samba to act as a domain controller too.)
> # The path below should be writable by all users so that their
> # profile directory may be created the first time they log on
> ;[profiles]
> ; comment = Users profiles
> ; path = /home/samba/profiles
> ; guest ok = no
> ; browseable = no
> ; create mask = 0600
> ; directory mask = 0700
>
> [printers]
> comment = All Printers
> browseable = no
> path = /var/spool/samba
> printable = yes
> guest ok = no
> read only = yes
> create mask = 0700
>
> # Windows clients look for this share name as a source of downloadable
> # printer drivers
> [print$]
> comment = Printer Drivers
> path = /var/lib/samba/printers
> browseable = yes
> read only = yes
> guest ok = no
> # Uncomment to allow remote administration of Windows print drivers.
> # You may need to replace 'lpadmin' with the name of the group your
> # admin users are members of.
> # Please note that you also need to set appropriate Unix permissions
> # to the drivers directory for these users to have write rights in it
> ; write list = root, @lpadmin
>
>
>
OK, that looks very much like the default smb.conf, have you actually
set up Samba ?
Are the 'smbd', 'nmbd' and 'winbind' deamons running, or
to put it
another way, have you started them ?
Rowland