asterisk users - Dec 2004 - Zaptel ISDN BRI settings for The Netherlands KPN

Hi list!

I am installing an * box that will be installed on a site with KPN BRI 
ISDN in The Netherlands. I am using bristuff fron Junghanns.

Does anybody know the correct settings for this? I will not have internet 
access there which makes it harder to google around on location.

switchtype = euroisdn
is pretty obvious but what about these settings:

signalling = bri_cpe_ptmp

; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net

pridialplan=local
prilocaldialplan=local
; trust user provided callerid (clip no screening)?
pritrustusercid = yes

immediate=yes
channel => 1-2

Thanks!!

Hello Remco,

Tuesday, December 28, 2004, 10:53:46 AM, you wrote:

RB> Does anybody know the correct settings for this? I will not have internet
RB> access there which makes it harder to google around on location.

RB> switchtype = euroisdn

RB> is pretty obvious but what about these settings:

RB> signalling = bri_cpe_ptmp

RB> ; p2p TE mode
RB> ;signalling = bri_cpe
RB> ; p2mp NT mode
RB> ;signalling = bri_net_ptmp
RB> ; p2p NT mode
RB> ;signalling = bri_net
RB> pridialplan=local
RB> prilocaldialplan=local
RB> ; trust user provided callerid (clip no screening)?
RB> pritrustusercid = yes

RB> immediate=yes


To my experience you will need bri_cpe as signaling (point2point),
immediate=no (if you have more than one numer on the ISDN),
pritrustusercid = no.

Regarding the pridialplan and prilocaldialplan I suggest to make some
experiment there.

Hope it helps !

-- 
Best regards,
 Alessio                            mailto:afoc@interconnessioni.it

On Tue, 28 Dec 2004, Remco Barende wrote:
> signalling = bri_cpe_ptmp
Use this to terminate a Point To Multipoint isdn line
> ; p2p TE mode
> ;signalling = bri_cpe
And this if the line is point-to-point. This is likely if you have did:s 
or multiple isdn lines grouped together. 
> ; p2mp NT mode
> ;signalling = bri_net_ptmp
> ; p2p NT mode
> ;signalling = bri_net
There are for acting as a switch to other isdn equipment such as isdn 
phones etc.
> pridialplan=local
> prilocaldialplan=local
The dialplan in Europe is often "unknown" which means you send the 
standard pots number, including any leading "0" for area codes /
country
codes. Talk to your pstn provider, they should be able to tell you what 
"Type Of Number" and "Numbering Plan" they expect you to
send the dialed
number (pridialplan) and your outgoing callerid (prilocaldialplan). 

You should also ask them how many digits they want you to send for
callerid. If you use DIDs then you can ask them how many digits thay pass 
for DID.

Peter

Hello (Hallo) Remco Barende

Just look at http://www.ip-phone-forum.de/forum/portal.php it's in 
German language but for a dutch guy no problem I gues ?

Sjaak

> Hi list!
>
> I am installing an * box that will be installed on a site with KPN BRI 
> ISDN in The Netherlands. I am using bristuff fron Junghanns.
>
> Does anybody know the correct settings for this? I will not have 
> internet access there which makes it harder to google around on location.
>
> switchtype = euroisdn
> is pretty obvious but what about these settings:
>
> signalling = bri_cpe_ptmp
>
> ; p2p TE mode
> ;signalling = bri_cpe
> ; p2mp NT mode
> ;signalling = bri_net_ptmp
> ; p2p NT mode
> ;signalling = bri_net
>
> pridialplan=local
> prilocaldialplan=local
> ; trust user provided callerid (clip no screening)?
> pritrustusercid = yes
>
> immediate=yes
> channel => 1-2
>
> Thanks!!
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users