Displaying 20 results from an estimated 36 matches for "bri_net".
Did you mean:
pri_net
2005 Aug 28
0
hfc-pci/zaphfc: Asterisk hangs with signalling bri_net_ptmp but not with bri_net
Please forgive me, if I misunderstand the problem completely.
Following instructions in several german blogs, I want to configure
Asterisk with a hfc-pci card, an old NTBA and an ISDN phone
as a SIP device.
It seems that I have to set signalling in zapata.conf to bri_net_ptmp.
When I do this, Asterisk will hang if started with -vvvvc, the last
lines of output being:
[res_features.so] => (Call Parking Resource)
== Parsing '/etc/asterisk/features.conf': Found
-- Registered extension context 'parkedcalls'
-- Added extension '700'...
2009 Mar 09
4
DAHDI and B410P (BRI)
Hi all,
I am having trouble setting the signalling method for the B410P using
DAHDI. Asterisk complains that it has never heard of 'bri_cpe' or
'bri_net' - but it doesn't mind having 'pri_cpe' etc.
ERROR[4294]: chan_dahdi.c:11327 process_dahdi: Unknown signalling method
'bri_net'
Dahdi - dahdi-linux-complete-2.1.0.4+2.1.0.2
Asterisk - 1.4.23.1
Libpri - 1.4.9
I have set the spans up with no problems (well, dahdi_cfg doesn&...
2005 Jun 22
1
PPPD problem please help
After a big help from Peter Svensson, I got ISDN Data-calls up and
running.
But now when everything seems connected, pppd has been authorized by
other peer and even got an IP address, the whole connection seems to
stop working.
Very unregulary, the PPPD's EchoReq's stop being answered, and of course
all TCP/IP-traffic as well.
It takes between 0-2 minutes till the connection breaks.
2005 Jul 22
0
R: Quadbri trouble
...not able to make and receive call. When I receive a call nothing happen in the asterisk cli and from the caller I receive
a connection error.
When I try to make a call I receive "unable to create zap channel"
THis is my configuration:
Zapata.conf
switchtype = euroisdn
signalling = bri_net
pridialplan = local
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel = yes
context=default
group = 1
; S/T port 1
channel => 1-2
signalling = bri_net
group = 2
; S/T port 2
channel => 4-5
signalling = bri_net
group = 3
; S/T port 3
channel =&...
2009 Mar 10
3
Update chan_dahdi.conf doc in voip-info.org
Hi,
It seems BRI signalling settings are missing from
http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conf
I would like to add those parameters :
bri_cpe_ptmp
bri_cpe
bri_net
Is this http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conftied
to a specific Asterisk version ?
Can I edit this ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090310/840c77bc/...
2005 Sep 03
1
newbie install problem. And I already searched everywhere!
...to create
channel of type 'Zap'
My relevant extension is:
exten => _97.,1,Dial(Zap/2/${EXTEN:2}})
and my zapata.conf is:
=======================
[channels]
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
signalling = bri_net
pridialplan = national
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=yes
group = 1
context=incoming
channel => 1-2
can anyone give me a hint how th debug the r...
2004 Dec 28
3
Zaptel ISDN BRI settings for The Netherlands KPN
...anybody know the correct settings for this? I will not have internet
access there which makes it harder to google around on location.
switchtype = euroisdn
is pretty obvious but what about these settings:
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan=local
prilocaldialplan=local
; trust user provided callerid (clip no screening)?
pritrustusercid = yes
immediate=yes
channel => 1-2
Thanks!!
2014 Aug 01
1
Connecting Asterisk and BT Versatility PBX via NT BRI port
..."B4XXP (PCI) Card 0 Span 4" AMI/CCS RED
span=4,2,0,ccs,ami
# termtype: te
bchan=10-11
hardhdlc=12
echocanceller=mg2,10-11
# Global data
loadzone = uk
defaultzone = uk
the /etc/asterisk/dahdi-channels.conf
group=0
context=from-PBX
overlapdial=yes
switchtype = euroisdn
signalling = bri_net
channel => 1-2
context=from-PBX
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
group=0
context=from-PBX
overlapdial=yes
switchtype = euroisdn
signalling = bri_net
channel => 4-5
context=from-PBX
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS RED
group=1
c...
2008 Nov 27
1
Unknown signalling method 'bri_cpe
Hello,
Using libpri-1.4.7 and asterisk-1.6.0.1, I've got "Unknown signalling method
'bri_cpe" when "module load chan_dahdi.so".
Googling with "chan_dahdi bri_net" don't help much.
Shall I upgrade to 1.6.1rcXXX to get 'bri_cpe" support ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081127/ba46aec5/attachment.htm
2009 Sep 04
1
1.4.26-2, DAHDI-2.2.0, B410P and BRI
...mkintf: Signalling
requested on channel 1 is FXO Loopstart but line is in ISDN PRI signalling
[Sep 4 19:07:37] ERROR[18464]: chan_dahdi.c:11294 build_channels:
Unable to register channel '1-2'
Why signalling bri_cpe_ptmp is not recognized (for tests, pri_cpe is
loading well, bri_cpe or bri_net gaves also errors)?
In chan_dahdi.conf I have
[...]
switchtype = euroisdn
signalling = bri_cpe_ptmp
;signalling = pri_cpe
channel => 1-2
dahdi_scan give me for port:
[1]
active=yes
alarms=OK
description=B4XXP (PCI) Card 0 Span 1
name=B4/0/1
manufacturer=Digium
devicetype=Wildcard B410P
loca...
2009 Dec 11
0
zttool don't show NT mode with OctoBRI
...=1
immediate=no
;callprogress=yes
;progzone=us
;signalling=bri_cpe_ptmp
group = 1
switchtype=euroisdn
signalling=bri_cpe
channel => 1-2
echocanceller=oslec,1-2
group = 1
switchtype=euroisdn
signalling=bri_cpe
channel => 4-5
echocanceller=oslec,4-5
group = 1
switchtype=euroisdn
signalling=bri_net
channel => 7-8
echocanceller=oslec,7-8
group = 1
switchtype=euroisdn
signalling=bri_net
channel => 10-11
echocanceller=oslec,10-11
# cat ../zaptel.conf
loadzone=fr
defaultzone=fr
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,...
2010 Jun 16
0
Asterisk +Dahdi does not work with BRI NT
...f)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is
intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global
settings
;
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-internal
switchtype = euroisdn
signalling = bri_net
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
group=0,12
context=from-internal
switchtype = euroisdn
signalling = bri_net
channel => 4-5
context = default
group = 63
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" RED
group=0,13...
2005 May 25
7
zaphfc: empty HDLC frame or bad CRC received
...s the message i get in the syslog (a lot of these messages):
zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff,
card = 0).
this is the zaptel.conf:
loadzone=it
defaultzone=it
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
this is the zapata.conf:
group = 1
context=default
signalling = bri_net_ptmp
channel => 1-2
this is the modules.conf:
[modules]
autoload=yes
noload => pbx_gtkconsole.so
noload => pbx_kdeconsole.so
noload => app_intercom.so
load => res_features.so
load => chan_modem.so
load => res_musiconhold.so
load => chan_alsa.so
noload => chan_oss.so
load...
2008 Nov 26
7
Dahdi, b410p and looping from 1 port to another
Hello,
Is it possible, for testing, to connect an cat5 straight patch cord between
2 ports of a Digium B410P card and use these 2 ports as a normal dahdi trunk
?
I've tried this:
One port is set as NT, the other as TE.
I would expect timing to come for system hardware so I choose in
/etc/dahdi/system.conf :
span=1,0,0,ccs,ami
span=2,0,0,ccs,ami
Results:
- both ports lights are green
-
2004 Jun 28
1
Protocol Error (6) using Zaphfc
...l? )
Kind Regards
NRB
Setup
Bri-stuff - 0.0.20
Asterisk CVS-HEAD-06/23/04-15:45:48 built by root@localhost.localdomain on a
i686 running Linux
Zapata.conf:
[channels]
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan=local
prilocaldialplan=local
echocancel=yes
immediate=yes
group = 1
context=demo
channel => 1-2
Zaptel.conf:
loadzone=nl
defaultzone=nl
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
Example where a sip client (2203) is calling xxxx7024
2008 Nov 12
4
test OpenVox B400P and junghans card for dahdi BRI wcb4xxp
...xt
;
;
switchtype = euroisdn
; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp
; p2p TE mode (for connecting ISDN lines in point-to-point mode)
;signalling = bri_cpe
; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode)
;signalling = bri_net_ptmp
; p2p NT mode (for connecting an ISDN pbx in point-to-point mode)
;signalling = bri_net
pridialplan = local
prilocaldialplan = dynamic
nationalprefix = 0
internationalprefix = 00
priindication = passthrough
echocancel = yes
context=demo
group = 1
; S/T port 1
channel => 1-2
group = 2
;...
2004 Jul 18
4
quadbri NT_mode S-Bus Problem
...ing suddenly to busy when the other party is sending a busy signal. I'd
rather have the call progress send a busy signal right away.
2. Internal calls between to ISDN phones on the S-bus is not possible. The
phone rings but the call is dropped as soon as it is answered.
Can the signalling= bri_net_ptmp be the cause and how would I configure it
for bri_net?
Does anyone have a working configuration that overcomes thoses problems?
Regards,
Ben
; Zapata telephony interface
;
; Configuration file
[channels]
switchtype = euroisdn
overlapdial=no
echocancel=yes
echocancelwh...
2010 Jun 17
4
Asterisk + Dahdi does not work with BRI NT mode
...f)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is
intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global
settings
;
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-internal
switchtype = euroisdn
signalling = bri_net
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" RED
group=0,12
context=from-internal
switchtype = euroisdn
signalling = bri_net
channel => 4-5
context = default
group = 63
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" RED
group=0,13...
2005 Sep 12
1
chan_zap.c:8050 pri_dchannel: Ring requested on unconfigured channel 255/255 span 2
...5
dchan=6
span=3,1,3,ccs,ami
bchan=7-8
dchan=9
span=4,1,3,ccs,ami
bchan=10-11
dchan= 12
# TDM400P with 4 FXS
fxoks=13-16
$ cat /etc/asterisk/zapata.conf
[channels]
; Default language
language=be
callerid=asreceived
immediate=no
switchtype=euroisdn
;
; Port 1-2 to PBX
;
context=isdn-pbx
signalling=bri_net
group=2
channel => 1-2,4-5
echocancel = yes
;
; Port 3-4 to Telco
;
context=isdn-public
signalling = bri_cpe
group=1
channel => 7-8,10-11
;
; TDM40B kanalen
;
signalling=fxo_ks
language=be
context=analog
channel => 13
signalling=fxo_ks
language=be
context=analog
channel => 14
signal...
2005 Mar 28
1
Connecting quadbri to EuroISDN with 2 TE and 2 NT ports - what cables and settings ?
...context=isdn-incoming
group = 1
; S/T port 1-3 (first quadBRI, or lower ports of an octoBRI)
channel => 1-2
channel => 4-5
channel => 7-8
;-------------------------------------------------------------------
; p2p NT mode (for connecting an ISDN PBX in point-to-point mode)
signalling = bri_net
context=pbx-incoming
group = 2
; S/T port 4 (second quadBRI, or upper ports of an octoBRI)
channel => 10-11