search for: p2mp

...channel. (We can't afford PRI line as its cost is about 10x of the BRI). The line will be connected to the CTI card. Using asterisk server we will be recording the calls. I'm confused about whether we should apply for point-to-point connectivity or point-to-multipoint. P2P costs more than P2MP and we do not intend to invest money if not needed. I would like to ask your advice on whether for our purpose we need p2p or would p2mp suffice? Thanks and regards. - Woody -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-...

...s for the ISDN trunk in question. Counting the active ISDN channels seems somewhat clumsy as the mapping to a specific trunk must be done by hand (or write even more code). I have a setup where outgoing calls normally use a P2P trunk, but if there are no free channels the system tries a separate P2MP trunk. In case the congestion is caused by the called party, switching to another trunks does not make any sense, so I need to find out whether my side is causing the CONGESTION. Has somebody tried to setup a dialgroup where P2P, P2MP, and POTS devices are all part of the same group? This would...

...g to connect quadbri between powered ISDN phone and ISDN line: ISDN <---1---> TE - * - NT <--2--> Phone I use quadbri, suse 9.2 and latest 0.2.0-RC7k bristuff. I've used sample settings provided with package, but do get strange error (I think that I have wrong setting for P2P or P2MP setting and cables 1 and 2). If I connect phone to ISDN with straight cable it works. I've put quadbri in between, and connected ISDN to span1 in TE mode, and phone in NT mode on span4. Did configuration (added at the end). I get errors: qozap: CRC error for HDLC frame on card 1 (cardID 255...

...ap/2/0652456343}") in new stack Sep 3 17:23:02 NOTICE[1117264816]: app_dial.c:727 dial_exec: Unable to create channel of type 'Zap' My relevant extension is: exten => _97.,1,Dial(Zap/2/${EXTEN:2}}) and my zapata.conf is: ======================= [channels] switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode signalling = bri_net pridialplan = national prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 echocancel=yes echotraining = 100 echocancelwhenbridged=y...

...tuff fron Junghanns. Does anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes immediate=yes channel => 1-2 Thanks!!

...ce is working just fine (P.S. what about the D-channel going up & down all the time - is that normal? ) Kind Regards NRB Setup Bri-stuff - 0.0.20 Asterisk CVS-HEAD-06/23/04-15:45:48 built by root@localhost.localdomain on a i686 running Linux Zapata.conf: [channels] switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local echocancel=yes immediate=yes group = 1 context=demo channel => 1-2 Zaptel.conf: loadzone=nl defaultzone=nl...

...xtension from an outside analog phone, AT sends the call before they finish dialing all 8 digits. Is there a way to prevent this, or to catch the additional 2 digits somewhere in the stream? The receptionist is unhappy because she gets all the 6-digit calls and must then transfer. Is this a p2p vs p2mp issue? Thanks in advance, Cassius Smith -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110203/b57ad6d1/attachment.htm>

...one=us defaultzone=us span=1,1,3,ccs,ami span=2,2,3,ccs,ami span=3,3,3,ccs,ami span=4,4,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 ========== chan_dahdi.conf: [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp ; p2p TE mode (for connecting ISDN lines in point-to-point mode) ;signalling = bri_cpe ; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode) ;signalling = bri_net_ptmp ; p2p NT mode (for conn...

...e Call Initiated, peerstate Overlap sending -- Hungup 'Zap/8-1' == Everyone is busy/congested at this time (1:0/0/1) == Auto fallthrough, channel 'SIP/gdevlet-089534a8' status is 'CHANUNAVAIL' -------------------- /etc/asterisk/zapata.conf switchtype = euroisdn ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp pridialplan = unknown prilocaldialplan = unknown overlapdial=yes nationalprefix = 0 internationalprefix = 00 ;usecallingpres=yes callerid=asreceived ;priindication = passthrough echocancel = yes echocancelwh...

...span=1,1,3,ccs,ami span=2,0,3,ccs,ami span=3,0,3,ccs,ami span=4,0,3,ccs,ami bchan=1,2,4,5,7,8,10,11 dchan=3,6,9,12 fxoks=13-16 ------ zapata.conf ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) ;signalling = bri_cpe_ptmp ; p2p TE mode (for connecting ISDN lines in point-to-point mode) signalling = bri_cpe ; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode) ;signalling = bri_net_ptmp pridialplan = local p...

...ccs,ami bchan=1-2 dchan=3 span=2,1,0,ccs,hdb3,crc4 bchan=4-18 dchan=19 bchan=20-34 And my zapata.conf looks like this: ; ; Zapata telephony interface ; ; Configuration file [channels] rxgain = 5.0 txgain = 5.0 ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local ; trust user provided callerid (clip no screening)? ;pritrustusercid = yes ;callerid=asreceived usecalleri...

Hello, I always thought that Energy Savings mode existed with ISDN Basic Rate Interface in Point -to-multi-Point but it didn't with Point-to-point. Is this correct ? Have you ever met a public PSTN switch configured to "cut" B ISDN channels in Point-to-point.signalling ? Regards. -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, i've downloaded/compiled/installed the bristuffed asterisk Asterisk 1.0.7-BRIstuffed-0.2.0-RC8a and i'm using it with an hfc card. It runs on a debian 3.1 sarge machine with kernel 2.6.11. Asterisk works well if i configure the card using isdn4linux. I'm having problems dialing out (not tried the input yet). This is the output from asterisk: -- Accepting AUTHENTICATED call from

...). So i want to test two cards and make loop between them. So one card would be NT, another TE. My configurations: /etc/zaptel.conf: loadzone=lt defaultzone=lt span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,0,3,ccs,ami bchan=4-5 dchan=6 /etc/asterisk/zapata.conf [channels] switchtype = euroisdn ; p2mp NT mode signalling = bri_net_ptmp echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=yes group = 1 context=from-internal channel => 1-2 signalling = bri_cpe_ptmp group = 2 context=from-internal channel => 4-5 So I get this from asterisk logs: Aug 12 03:08:23 DEBUG[299...

...ncomingmsn=* controller=1 softdtmf=1 accountcode= context=default ;echosquelch=1 ;echocancel=yes ;echotail=64 callgroup=1 deflect=12345678 devices=2 ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode ;signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local echocancel=yes immediate=no group = 2 context=isdn channel => 1-2 # hfc-s pci a span definition # most of the values should be...

...ta.conf to /etc/asterisk/ ----------------------------------------------------------------- Edit /usr/src/bri-stuff.0.0.2/zaphfc/zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 --------------- Edit /etc/asterisk/zapata.conf: signalling = bri_net_ptmp //p2mp NT mode port1/(card1) group = 1 context=default channel => 1-2 signalling = bri_cpe_ptmp //p2mp TE mode port2/(card2) group = 2 context=default channel => 4-5 ----------------------------------------------------------------- Edit /usr/src/bri-stuff.0.0.2/zaphfc/Makefile part of Makefile:...

...* buttons use the following ;# (where x=number of buttons to dislpay) ;# ;AMPWILDCARDLABEL(x):MyLabel [channels] language=it ; include zap extensions defined in AMP #include zapata_additional.conf ; XTDM20B Port #1,2 plugged into PSTN ;AMPLABEL:Channel %c - Button %n signalling = bri_cpe_ptmp ;p2mp TE mode port1/(card1) faxdetect=incoming usecallerid=yes echocancel=yes echocancelwhenbridged=no echotraining=800 hidecallerid=no callerid=asreceived group = 1 context=from-pstn channel => 1-2 signalling = bri_cpe_ptmp ;p2mp TE mode port2/(card2) faxdetect=incoming usecallerid=yes echocancel=ye...

...by root(uid=0) Dec 18 07:48:43 intechdial kernel: zaphfc: empty HDLC frame received. Dec 18 07:49:06 intechdial last message repeated 8 times *******; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=unknown prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes echocancel=yes immediate=no gro...

...Call Parking Resource 1 chan_zap.so Zapata Telephony w/PRI 0 monk*CLI> My zapata.conf: ; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_net_ptmp ;signalling = bri_net ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan = local ;prilocaldialplan = local ;nationalprefix = 0 ;internationalprefix = 00 echocancel=yes echotraining = 100...

I have the same problem in a box with 2 HFC-PCI, but i already remove the row in modprobe.conf and load the module manually. Both cards works fine Any idea ? Giordano -----Messaggio originale----- Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Julian J. M. Inviato: luned? 27 giugno 2005 12.04 A: