Displaying 20 results from an estimated 91 matches for "bri_cpe_ptmp".
2004 Jul 20
1
quadBRI
...nl
defaultzone=nl
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
zaptel.conf:
switchtype = euroisdn
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=8.2
txgain=-1.0
signalling = bri_cpe_ptmp
pridialplan = local
prilocaldialplan = local
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
context=isdn-ingresso
group = 1
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
context=isdn-ingresso
group = 2
channel => 4-5
switchtype = eur...
2004 Jun 11
1
QuadBRI outgoing call problem.
...request for TEI = 127 #################################### Error
Message I often get #############################################
######################################### Zapata.conf
#################################
[channels]
;
; ISDN quadBRI interfaces
;
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 1
context=from-pstn
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=from-pstn
channel => 4-5
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 3
context=from-pstn
channel => 7-8
#...
2005 Jan 20
1
Weird Zaphfc - not dialling non-local numbers
...39;)
*** extensions.conf ***
[from-isdn]
exten => 518,1,Dial(Zap/g2/907748xxxxxx)
exten => 521,1,Dial(Zap/g2/228)
*** zapata.conf ***
[channels]
language=en
rxwink=300
switchtype=euroisdn
nationalprefix= <- also tried 0 and 90 here
internationalprefix= <- tried 00 here
signalling = bri_cpe_ptmp
prilocaldialplan=local
pridialplan=local
rxgain=3.0
txgain=3.0
echocancel=64
echotraining=yes
echocancelwhenbridged=yes
immediate=no
overlapdial=no
group = 1
context=from-isdn
channel => 1-2
signalling = bri_cpe_ptmp
pridialplan=local
prilocaldialplan=local
rxgain=3.0
txgain=3.0
echocancel=64
e...
2008 Jan 03
2
HFC-S zap channels always busy
...e
situation back to its original, albeit useless, state if I stop and
start Asterisk.
My configuration files are as follows:
/etc/asterisk/zapata-channels.conf (after running "genzaptelconf -sd -c nl"):
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
group=
context=default
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
group=
context=default
/etc/asterisk/zapata.conf (supposed to work in the Netherlands):
[trunkgroups]
[channels...
2009 Sep 04
1
1.4.26-2, DAHDI-2.2.0, B410P and BRI
...ad chan_dahdi.so
== Registered application 'DAHDISendKeypadFacility'
== Registered application 'ZapSendKeypadFacility'
== Parsing '/etc/asterisk/chan_dahdi.conf': Found
[Sep 4 19:07:37] ERROR[18464]: chan_dahdi.c:11675 process_dahdi:
Unknown signalling method 'bri_cpe_ptmp'
[Sep 4 19:07:37] ERROR[18464]: chan_dahdi.c:7677 mkintf: Signalling
requested on channel 1 is FXO Loopstart but line is in ISDN PRI signalling
[Sep 4 19:07:37] ERROR[18464]: chan_dahdi.c:11294 build_channels:
Unable to register channel '1-2'
Why signalling bri_cpe_ptmp is not reco...
2012 May 09
5
Belgian BRI (euroisdn): what to use for a B410P
Hi,
I'm experiencing difficulties to get a B410P running with Asterisk
10.3.1 and DAHDI 2.6.1.
Am I supposed to use DAHDI for this card and ISDN BRI for my country
(Belgium)?
thx,
BC
2004 Apr 07
0
Call hangs up after a fiew seconds with a quad BRI
...rule 't' in context 'sip'
-- Hungup 'Zap/1-1'
extension.conf:
exten => 1111,1,SetCallerID(45)
exten => 1111,2,SetCIDName(45)
exten => 1111,3,Dial(Zap/g1/00796085427)
zapata.conf:
[channels]
;
; ISDN quadBRI interfaces
;
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
usecallerid=yes
callerid=0448474545
group = 1
context=sip
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=sip
channel => 4-5
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 3
context=sip
cha...
2009 Mar 10
3
Update chan_dahdi.conf doc in voip-info.org
Hi,
It seems BRI signalling settings are missing from
http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conf
I would like to add those parameters :
bri_cpe_ptmp
bri_cpe
bri_net
Is this http://www.voip-info.org/wiki/view/Asterisk+config+chan_dahdi.conftied
to a specific Asterisk version ?
Can I edit this ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20...
2004 Jul 21
1
roblems with Junghanns QuadBri
...s should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
[zapatel.conf]
[channels]
;
; ISDN quadBRI interfaces
;
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 1
context=to-pstn
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=to-pstn
channel => 4-5
To me it looks all fine.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.d...
2004 Dec 28
3
Zaptel ISDN BRI settings for The Netherlands KPN
...th KPN BRI
ISDN in The Netherlands. I am using bristuff fron Junghanns.
Does anybody know the correct settings for this? I will not have internet
access there which makes it harder to google around on location.
switchtype = euroisdn
is pretty obvious but what about these settings:
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan=local
prilocaldialplan=local
; trust user provided callerid (clip no screening)?
pritrustusercid = yes
immediate=yes
channel => 1-2
Thanks!!
2004 May 07
2
quadBRI & ISDN telephone
Hello,
We have a quadBRI in NT mode with bri_cpe_ptmp signalling and when connect a
ISDN telephone to this nothings happen.
What can I do?
My config files are this:
Zaptel.conf:
loadzone=es
defaultzone=es
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,1,3,ccs,ami
span=3,1,3,c...
2010 May 10
0
Sometimes called party answers, but callee keep hear ringing, called party hears nothing!
...located in Spain, if this matters.
we have an ubuntu server 32bit, stock ubuntu asterisk and dahdi:
asterisk, 1:1.6.2.5-0ubuntu1
dahdi, 1:2.2.1-0ubuntu2
We have 4 ISDN lines, currently 3 lines connected.
Some are connected as bri_cpe (from the former input to a Siemens HiPath 3000), and some as bri_cpe_ptmp.
Span 2 currently not connected.
Span configuration:
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=0,11
context=from-zaptel
switchtype = euroisdn
signalling = bri_cpe
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2...
2005 Sep 03
1
newbie install problem. And I already searched everywhere!
...new stack
Sep 3 17:23:02 NOTICE[1117264816]: app_dial.c:727 dial_exec: Unable to create
channel of type 'Zap'
My relevant extension is:
exten => _97.,1,Dial(Zap/2/${EXTEN:2}})
and my zapata.conf is:
=======================
[channels]
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
signalling = bri_net
pridialplan = national
prilocaldialplan = local
nationalprefix = 0
internationalprefix = 00
echocancel=yes
echotraining = 100
echocancelwhenbridged=yes
immediate=yes
group = 1
contex...
2012 Feb 03
2
Junghanns QuadBri install help
...10,11
hardhdlc=12
echocanceller=oslec,1,2,4,5,7,8,10,11
----------------------------------------------------------------
/etc/asterisk/dahdi-channels.conf
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS RED
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS RED
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
context = default
group = 63
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/...
2006 Oct 25
2
PBAX-Group with QuadBRI card, outgoing call problem
...veryone is busy/congested at this time (1:0/0/1)
== Auto fallthrough, channel 'SIP/gdevlet-089534a8' status is 'CHANUNAVAIL'
--------------------
/etc/asterisk/zapata.conf
switchtype = euroisdn
; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
signalling = bri_cpe_ptmp
pridialplan = unknown
prilocaldialplan = unknown
overlapdial=yes
nationalprefix = 0
internationalprefix = 00
;usecallingpres=yes
callerid=asreceived
;priindication = passthrough
echocancel = yes
echocancelwhenbridged = yes
echotraining = 100
context=isdn-incoming
; S/T port 1 - 4
channel =>...
2007 Dec 30
1
Zap channels for HFC-S PCI card not responding
...Channel 05: Clear channel (Default) (Slaves: 05)
Channel 06: D-channel (Default) (Slaves: 06)
6 channels to configure.
/etc/asterisk/zapata-channels.conf after running "genzaptelconf -sd -c nl":
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
group=
context=default
group=0,12
context=from-pstn
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
group=
context=default
/etc/asterisk/zapata.conf (supposed to work in the Netherlands):
[trunkgroups]
[channels...
2005 Apr 19
2
Installed ztdummy, Asterisk doesnt work anymore
...237]:
chan_zap.c:9615 setup_zap: Ignoring switchtype
Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring pridialplan
Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring overlapdial
Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9436 setup_zap: Unknown signalling
method 'bri_cpe_ptmp'
Apr 19 11:07:28 WARNING[6237]: chan_zap.c:9615 setup_zap: Ignoring overlapdial
Apr 19 11:07:28 ERROR[6237]: chan_zap.c:9078 setup_zap: Signalling must be
specified before any channels are.
Apr 19 11:07:28 WARNING[6237]: loader.c:345 ast_load_resource: chan_zap.so:
load_module failed, returni...
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
...This is not intended to be a complete chan_dahdi.conf. Rather, it is
intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global
settings
;
; Span 1: B4/0/1 "B4XXP (PCI) Card 0 Span 1" (MASTER) AMI/CCS
group=2,11
context=external
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 1-2
context = default
group = 63
; Span 2: B4/0/2 "B4XXP (PCI) Card 0 Span 2" AMI/CCS
group=2,12
context=external
switchtype = euroisdn
signalling = bri_cpe_ptmp
channel => 4-5
context = default
group = 63
; Span 3: B4/0/3 "B4XXP (PCI) Card 0 Span 3" AMI/CCS R...
2004 Sep 11
2
Leading '0's and what do 'pri_dialplan', 'pridialplan' and 'prilocaldialplan' in zapata.conf do?
...Nick Barnes
Asterisk version
------------------------------
CVS-HEAD-08/13/04-12:00:00-BRI-stuffed-0.1.0-RC4a
zaptel.conf
------------------------------
loadzone=uk
defaultzone=uk
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
zapata.conf
------------------------------
switchtype=euroisdn
signalling=bri_cpe_ptmp
pridialplan=unknown
prilocaldialplan=unknown
echocancel=yes
immediate=no
usecallerid=yes
callerid=asreceived
group=1
context=from-zap
channel => 1-2
2005 Sep 26
0
ZapHFC Channel unavailable
...gt; -- Executing Dial("OSS/dsp", "Zap/g1/xxxxxxxxxx|120") in new stack
Unable to create channel of type 'Zap'
== Everyone is busy/congested at this time
Exiting with DIALSTATUS=CHANUNAVAIL.
------
------ zapata.conf:
[channels]
switchtype = euroisdn
signalling = bri_cpe_ptmp
nationalprefix = 0
internationalprefix = 00
usecallingpres=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
callerid=asreceived
immediate=yes
signalling=bri_cpe_ptmp
group = 1
context=d...