search for: bri_net_ptmp

Please forgive me, if I misunderstand the problem completely. Following instructions in several german blogs, I want to configure Asterisk with a hfc-pci card, an old NTBA and an ISDN phone as a SIP device. It seems that I have to set signalling in zapata.conf to bri_net_ptmp. When I do this, Asterisk will hang if started with -vvvvc, the last lines of output being: [res_features.so] => (Call Parking Resource) == Parsing '/etc/asterisk/features.conf': Found -- Registered extension context 'parkedcalls' -- Added extension '700' prior...

...gt; <br> <b>Zaptel Configuration<br> ======================<br> <br> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)<br> <br> 3 channels configured.</b><br> <br> looks good also!<br> <br> when I use "<b>signalling = bri_net_ptmp</b>" in /etc/asterisk/zapata.conf&nbsp; and start asterisk, asterisk stops at the initializing of chan_zap without errors or warnings... It just stalls... When I use "<b>signalling = bri_net</b>" instead, although I am not sure if that is OK to do, asterisk load...

...day) which runs a Junghans QuadBRI card [1]. To get this flying I got dahdi-linux, dahdi-tools and libpri from SVN as well. After a while of juggling it "works". What doesn't work: connected ISDN devices (Gigaset phones connected to QuadBRI with a port in NT mode, signalling via bri_net_ptmp) can not transfer calls by pressing "#". SIP phones can. I'm at a point where I can't even get *any* output to debug. I went through the relevant configs as good as I can a couple of times but am out of ideas. I'm guessing that this is somehow related to either Asterisk n...

...anybody know the correct settings for this? I will not have internet access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes immediate=yes channel => 1-2 Thanks!!

...ing suddenly to busy when the other party is sending a busy signal. I'd rather have the call progress send a busy signal right away. 2. Internal calls between to ISDN phones on the S-bus is not possible. The phone rings but the call is dropped as soon as it is answered. Can the signalling= bri_net_ptmp be the cause and how would I configure it for bri_net? Does anyone have a working configuration that overcomes thoses problems? Regards, Ben ; Zapata telephony interface ; ; Configuration file [channels] switchtype = euroisdn overlapdial=no echocancel=yes echocancelwhenbri...

...s the message i get in the syslog (a lot of these messages): zaphfc: empty HDLC frame or bad CRC received (framelen = 5, stat = 0xff, card = 0). this is the zaptel.conf: loadzone=it defaultzone=it span=1,1,3,ccs,ami bchan=1-2 dchan=3 this is the zapata.conf: group = 1 context=default signalling = bri_net_ptmp channel => 1-2 this is the modules.conf: [modules] autoload=yes noload => pbx_gtkconsole.so noload => pbx_kdeconsole.so noload => app_intercom.so load => res_features.so load => chan_modem.so load => res_musiconhold.so load => chan_alsa.so noload => chan_oss.so load =&gt...

...t zaptel source version 1.0.4 I do things in this order: modprobe zapata modprobe zaphfc ztcfg -vv asterisk -cvvvv rmmod zaphfc rmmod zapata Here are the config files: ############### zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 ############# zapata.conf: switchtype = euroisdn signalling = bri_net_ptmp pridialplan=local echocancel=yes immediate=yes group = 1 context=local channel => 1-2 ###### modules.conf [modules] autoload=yes noload => pbx_gtkconsole.so ;load => pbx_gtkconsole.so noload => pbx_kdeconsole.so noload => app_intercom.so noload => chan_modem.so load => chan_za...

...span=2,1,3,ccs,ami span=3,1,3,ccs,ami span=4,1,3,ccs,ami bchan=1,2 dchan=3 bchan=4,5 dchan=6 bchan=7,8 dchan=9 bchan=10,11 dchan=12 Zapata.conf: [channels] ; Default language language=es ; switchtype = euroisdn pridialplan = local prilocaldialplan = local context=default group = 1 signalling = bri_net_ptmp channel => 1-2,4-5,7-8,10-11 Thanks, Pedro

...de - works fine. brustuff is 0.2.0-RC7k Anybody knows what can be the reason ? I used florz path - helped me to make zaphfc driver running with APIC turned on. However NT mode didn't work @ all, maybe because of my asterisk was in a different version than the florz path (RC7k , RC8a). Putting bri_net_ptmp in config hanged up asterisk. Probably this is a problem of different releases, however is there anybody having asterisk package with bristuff RC8a for DEBIAN ? Or just a short howto built it ? Or maybe there is RC7k florz patch ? Building packages is not yet my strong side ;-( Regards, Marcin

...cards and make loop between them. So one card would be NT, another TE. My configurations: /etc/zaptel.conf: loadzone=lt defaultzone=lt span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,0,3,ccs,ami bchan=4-5 dchan=6 /etc/asterisk/zapata.conf [channels] switchtype = euroisdn ; p2mp NT mode signalling = bri_net_ptmp echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=yes group = 1 context=from-internal channel => 1-2 signalling = bri_cpe_ptmp group = 2 context=from-internal channel => 4-5 So I get this from asterisk logs: Aug 12 03:08:23 DEBUG[2997] chan_sip.c: build_route: Contac...

...to create channel of type 'Zap' My relevant extension is: exten => _97.,1,Dial(Zap/2/${EXTEN:2}}) and my zapata.conf is: ======================= [channels] switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode signalling = bri_net pridialplan = national prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 echocancel=yes echotraining = 100 echocancelwhenbridged=yes immediate=yes group = 1 context=incoming channel => 1-2 can anyone give me a hint how th debug the rest?...

Hi Guys, i've successfully installed the current bristuff, everything works fine, exept one thing: As soon as i pick up the phone that is connected to the bri-card, asterisk jumps into extension s of the context that is specified in zapata.conf, if i have immediate=no then i hear the normal dialtone for about 1/10 of a second. Any hints what i'm doing wrong? If i dial the number

...= euroisdn ; HFC-S TE mode signalling = bri_cpe_ptmp prilocaldialplan = national pridialplan = unknown echocancel = yes immediate = yes group = 1 context = inbound-zap channel => 1-2 switchtype = euroisdn ; HFC-S NT mode signalling = bri_net_ptmp prilocaldialplan = local overlapdial = no echocancel = yes setcallerid = ("" <${CALLERIDNUM}>) group = 2 immediate = no context = inbound-internal channel => 4-5 ; ; PSTN ; signalling = fxs_ks ; X100P group = 1 echocancel = yes...

...echdial last message repeated 8 times *******; ; Zapata telephony interface ; ; Configuration file [channels] ; ; Default language ; ;language=en ; ; Default context ; ; switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=unknown prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes echocancel=yes immediate=no group = 1 context=incoming channel => 1-2 signalling = bri_net_ptmp pridialplan=local group=2 contect=incoming c...

...; at line 9 of zapata.conf May 23 04:06:36 WARNING[4327] config.c: Unknown directive 'overlapdial=yes' at l ine 22 of zapata.conf May 23 04:06:36 ERROR[4327] chan_zap.c: Unknown signalling method 'bri_net_ptmp' May 23 04:06:36 ERROR[4327] chan_zap.c: Signalling must be specified before any channels are. May 23 04:06:36 WARNING[4327] loader.c: chan_zap.so: load_module failed, returni ng -1 May 23 04:06:36 WARNIN...

...chan=1-2 dchan=3 fxsks=4 --- /etc/asterisk/zapata.conf : [snip] switchtype = euroisdn signalling = bri_cpe_ptmp pridialplan=local echocancel=yes immediate=yes ;setcallerid(""<${CALLERIDNUM}>) ;usecallerid=yes group = 1 context=incoming channel => 1-2 [snip] Don't work with bri_net_ptmp --- ISDN operator : France Telecom --- *CLI> zap show channel 1 Channel: 1 File Descriptor: 25 Span: 1 Extension: s Context: incoming Caller ID string: xxxxxxxxxx Destroy: 0 Signalling Type: PRI Signalling Owner: Zap/1-1 Real: Zap/1-1 Callwait: <None> Threeway: <None> Confno: -1 Pr...

...namic prilocaldialplan = local nationalprefix = 0 internationalprefix = 00 musiconhold=default echocancel = yes echocancelwhenbridged = no echotraining = 100 ;------------------------- signalling = bri_cpe_ptmp context=pstn-inbound group = 1 channel => 1-2 ;------------------------- signalling = bri_net_ptmp context=isdn-inbound group = 2 channel => 4-5 Part of dialplan: ------------------ exten => _0.,1,SetCallerID(${EDN_MAIN:1}) exten => _0.,2,Dial(${ZAP_MAIN}${EXTEN:1},30) exten => _0.,3,Macro(dial-result) exten => _9.,1,SetCallerID(${EDN_WORK:1}) exten => _9.,2,Dial(${ZAP_MAIN}$...

...l? ) Kind Regards NRB Setup Bri-stuff - 0.0.20 Asterisk CVS-HEAD-06/23/04-15:45:48 built by root@localhost.localdomain on a i686 running Linux Zapata.conf: [channels] switchtype = euroisdn ; p2mp TE mode signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local echocancel=yes immediate=yes group = 1 context=demo channel => 1-2 Zaptel.conf: loadzone=nl defaultzone=nl span=1,1,3,ccs,ami bchan=1-2 dchan=3 Example where a sip client (2203) is calling xxxx7024

...xt ; ; switchtype = euroisdn ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode) signalling = bri_cpe_ptmp ; p2p TE mode (for connecting ISDN lines in point-to-point mode) ;signalling = bri_cpe ; p2mp NT mode (for connecting ISDN phones in point-to-multipoint mode) ;signalling = bri_net_ptmp ; p2p NT mode (for connecting an ISDN pbx in point-to-point mode) ;signalling = bri_net pridialplan = local prilocaldialplan = dynamic nationalprefix = 0 internationalprefix = 00 priindication = passthrough echocancel = yes context=demo group = 1 ; S/T port 1 channel => 1-2 group = 2 ; S/T...

Sorry that I wrote in german : Ich benutze asterisk mit dem zaphfc Treiber. Jetzt hab ich folgendes Problem, habe 2 ISDN-Telefone angeschlossen. zaphfc im nt-mode. Anrufe von ausserhalb per sip (sipgate.de) kommen an. Wenn ich aber intern zwischen den zwei Telefonen (Ascom Eurit 30) sprechen m?chte geht das nur wie folgt : Erst die Nebenstelle w?hlen und dann den H?rer am Telefon abnehmen.