Displaying 20 results from an estimated 405 matches for "pridialplan".
2005 May 30
2
pridialplan & prilocaldialplan
Hi list!
What exactly is the meaning / function of the pridialplan &
prilocaldialplan?
I've been trying to find out what the different possibilities for these
settings are but couldn't find a clear answer.
The possible parameters I could find are are :
local,unknown,dynamic,national,international
and maybe there are more?
Thanks!
2004 Dec 20
1
E1 signalling pridialplan
Hello,
I have a little problem with signalling. An E100p is connected to an
Alcatel PBX, wich has an E1 to the outside. Located in Germany.
zapata.conf:
switchtype=euroisdn
pridialplan=local
prilocaldialplan=local
overlapdial=yes
signalling=pri_cpe
....
With asterisk 1.0.2 I can call from a SIP phone to a phone connected
to the Alcatel and the SIP number is correctly displayed at the
caller. Let's say SIP phone is 12345, then 12345 is displayed.
Asterisk cvs head 2004.12.16....
2008 Oct 16
1
International calls/pridialplan from a legacy PBX.
...al-span T1 card. I want to place
it between the PSTN and my company's legacy PBX. I actually did do that,
but international calls from the legacy PBX were having the "011" stripped
off *AT* the PBX -- and someone pointed out that the PBX was probably
using the Asterisk equivalent of pridialplan. Which makes sense. But as
far as I can tell, pridialplan is used to *signal* the PSTN -- but there
doesn't appear to be any way to detect it, in Asterisk, from another
switch.
Is that true?
Because, if I can't detect it, I have no other way of determining whether
or not a call from the...
2004 Jul 20
1
quadBRI
...=nl
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
zaptel.conf:
switchtype = euroisdn
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=8.2
txgain=-1.0
signalling = bri_cpe_ptmp
pridialplan = local
prilocaldialplan = local
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
context=isdn-ingresso
group = 1
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
context=isdn-ingresso
group = 2
channel => 4-5
switchtype = euroisdn
signall...
2007 Feb 06
1
pridialplan/prilocaldialplan
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
Can someone explain what the parameters pridialplan and prilocaldialplan
are? What do they do and do I need them?
I've connected an asterisk box via E1 (sangoma) to an alcatel 4200 pbx.
The pbx technican complains about the format of the nr asterisk sends.
Asterisk sends all numbers in on piece the pbx expects the numbers
devided into internati...
2007 Jul 08
3
Zapata, Junghanns Card and a leading 0 on inbound calls
...hings are working, the only missing stuff is to add a "0" as a
prefix to each incoming call, to make it possible to answer missed call
lists. I'm using the 0 as the prefix for outside lines.
I've experimented a little with the prefix settings in zapata.conf, but
without success:
pridialplan=national
;prilocaldialplan=unknown
;pridialplan = unknown
;prilocaldialplan = dynamic
nationalprefix = 00
internationalprefix = 000
Is there a way to debug the ISDN messages coming on my D-channel, like
it is shown with misdn? I would like to see the dialplan settings coming
from the Network side....
2004 Sep 11
2
Leading '0's and what do 'pri_dialplan', 'pridialplan' and 'prilocaldialplan' in zapata.conf do?
...he following problems:
1 - Outbound dialed numbers had the MSD stripped off
So, I issue the command 'Dial(Zap/g1/0123456) and Zap tries to dial
'123456'. It took a bit of digging to actually work out what the problem was
in the first place, but I managed to resolve this by setting
'pridialplan=unknown' in zapata.conf.
2 - Inbound CallerIDs have the MSD stripped off (only tested with UK
numbers, where the leading '0' is removed). I have no idea whether
international callerids would be similarly treated. I cannot find any
explanation for this 'feature' at all - it does...
2004 Sep 10
0
pridialplan & nationalprefix
For whom which may be interested:
Here in Italy we have GSM #numbers without leading zero
PSTN instead has prefix starting with '0'
to have '0' recognized by * i need to insert
nationalprefix=0
as Jason Williams suggested me in irc;
now, you cannot have:
pridialplan=natonal
otherwise * will not be able to call GSM phones
you need to setup:
pridialplan=local
prilocaldialplan=local
nationalprefix=0
Maurizio
2005 Jan 02
1
pridialplan=unknown ?
After setting the pridialplan=unknown I seeing the Called Number TON change
to Unknown Number Type but not the Calling Number TON. Should both be
following this parameter or not. If not is their another option to change
the Calling Number TON?
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0...
2005 Sep 19
0
pridialplan per call or per channel group?
Hi,
Is it possible to set the pridialplan (or prilocaldialplan) on a
call-by-call basis, or for a particular PRI channel-group?
>From my experimentation so far, it appears to me that the pridialplan and
prilocaldialplan are global in zapata.conf, unlike other options such as
switchtype, signalling, and context.
I currently have two...
2011 May 19
1
Pridialplan/ prilocaldialplan
Hi
I'm beginner in list. I have doubts about the options pridialplan and
prilocaldiaplan in chan_dahdi.conf. I interconnect the Asterisk with a
Siemens PBX, but i saw that the changes in the file do not take effect in
debug of the span or calling/called number. How to use this options? In that
cases to use?
Ps.: sorry for the english, i'm brazilian.
Thanks
--...
2008 Dec 04
3
BT - ISDN30 - International Calls not working, everything else is fine :(
Dear All,
Thank you for taking the time to read this post - I am *confused!* as to why my asterisk setup does not work as it should. I have an ISDN 30 connection for telephony, a Sangoma card, and asterisk installed.
Incoming calls, and outgoing calls work 100%. Making an international call, results in silence, or the error message all circuits are busy
Numbers being passed to the trunk for
2009 Nov 19
1
Type Of Number setting (pridialplan) is not effective
Hello,
I have an Asterisk system in the UK using ISDN service from BT.
My problem is that the called number is always passed to the provider with the Type Of Number declared as ?national? despite pridialplan (and prilocaldialplan) is set to ?unknown?.
My questions are:
- How can I find out what the effective value is for the above two variables without actually making a call? (I have very limited possibilities to make test calls, as the ISDN lines are connected to a production system from which we pl...
2004 Jun 11
1
QuadBRI outgoing call problem.
...EI = 127 #################################### Error
Message I often get #############################################
######################################### Zapata.conf
#################################
[channels]
;
; ISDN quadBRI interfaces
;
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 1
context=from-pstn
channel => 1-2
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=from-pstn
channel => 4-5
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 3
context=from-pstn
channel => 7-8
#############...
2009 Jan 24
3
no dial tone tdm400p
...no dial plan and all LEDS on the card lit, I get no dial tone, plugging an analog phone into ports 1 or 2, only a buzz and click.
zaptel.conf -
defaultzone=us
loadzone=us
fxoks=1,2
fxsks=3,4
zapata.conf
[channels]
signalling=fxo_ks
language=us
context=phones-1
group=0
##switchtype=national
##pridialplan=national
channel=1
signalling=fxs_ks
language=us
context=line-1
group=0
##switchtype=national
##pridialplan=national
channel=4
joe a.
2004 Dec 28
3
Zaptel ISDN BRI settings for The Netherlands KPN
...not have internet
access there which makes it harder to google around on location.
switchtype = euroisdn
is pretty obvious but what about these settings:
signalling = bri_cpe_ptmp
; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net
pridialplan=local
prilocaldialplan=local
; trust user provided callerid (clip no screening)?
pritrustusercid = yes
immediate=yes
channel => 1-2
Thanks!!
2011 Jun 07
3
reload chan_dahdi.conf without disconnect active calls
Hi ALL,
Is there any way i can reload chan_dahdi.conf without disconnecting active PRI calls ?
I want to change pridialplan= option
-S
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110607/005a1193/attachment.htm>
2013 Sep 25
5
Asterisk TON number
...nnected it to our MSS using Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number.
If you have worked in Telecommunication you will know the importance of TON flexibility.
All the posts online suggested to update under Chan_dahdi.conf:
pridialplan = international
prilocaldialplan = international
or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload
I have already done this with no success. Are there other changes I have to make in order to change dialplan?
Br
-------------- next part --------------
An HTML...
2004 Aug 12
5
Question about TE405P
...hdb3
span=3,0,1,ccs,hdb3
span=4,0,1,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaitingcallerid=yes
language=en
immediate=no
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
channel => 1-15,17-31
---------------------------------
Do you Yahoo!?
Yahoo! Ma...
2005 Jan 20
1
Weird Zaphfc - not dialling non-local numbers
...isdn]
exten => 518,1,Dial(Zap/g2/907748xxxxxx)
exten => 521,1,Dial(Zap/g2/228)
*** zapata.conf ***
[channels]
language=en
rxwink=300
switchtype=euroisdn
nationalprefix= <- also tried 0 and 90 here
internationalprefix= <- tried 00 here
signalling = bri_cpe_ptmp
prilocaldialplan=local
pridialplan=local
rxgain=3.0
txgain=3.0
echocancel=64
echotraining=yes
echocancelwhenbridged=yes
immediate=no
overlapdial=no
group = 1
context=from-isdn
channel => 1-2
signalling = bri_cpe_ptmp
pridialplan=local
prilocaldialplan=local
rxgain=3.0
txgain=3.0
echocancel=64
echotraining=yes
echocancelwhenbridg...