search for: prilocaldialplan

Only a warning, and doesn't seem to do anything bad. But I can't seem to figure out what these warnings mean? -- Requested transfer capability: 0x00 - SPEECH [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: k [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: o [Feb 17 12:33:03] WARNING[10750]: chan_dahdi.c:3096 dahdi_call: Unrecognized prilocaldialplan NPI modifier: w It only come on every 5 calls or more, or something. What doe...

...t;SIP/ibm-b2c52848", "") in new stack -- Executing [1011501522xxx at gsm:2] Dial("SIP/ibm-b2c52848", "Zap/R3/501522xxx") in new stack -- Requested transfer capability: 0x00 - SPEECH [Jul 13 11:58:50] WARNING[18208]: chan_zap.c:2731 zt_call: Unrecognized prilocaldialplan TON modifier: 5 [Jul 13 11:58:50] WARNING[18208]: chan_zap.c:2731 zt_call: Unrecognized prilocaldialplan TON modifier: 5 [Jul 13 11:58:50] WARNING[18208]: chan_zap.c:2731 zt_call: Unrecognized prilocaldialplan TON modifier: 5 [Jul 13 11:58:50] WARNING[18208]: chan_zap.c:2731 zt_call: Unrecognized...

Asterisk 1.6.0.6 with dahdi 2.1.0.4 is showing a strange "Unrecognized prilocaldialplan" error with the SIP username when a SIP call is dialed to a PRI trunk. The error shows up like this: Unrecognized prilocaldialplan TON modifier: a Unrecognized prilocaldialplan TON modifier: b Unrecognized prilocaldialplan TON modifier: c Where abc is the SIP username. Is this a...

Hi list! What exactly is the meaning / function of the pridialplan & prilocaldialplan? I've been trying to find out what the different possibilities for these settings are but couldn't find a clear answer. The possible parameters I could find are are : local,unknown,dynamic,national,international and maybe there are more? Thanks!

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, Can someone explain what the parameters pridialplan and prilocaldialplan are? What do they do and do I need them? I've connected an asterisk box via E1 (sangoma) to an alcatel 4200 pbx. The pbx technican complains about the format of the nr asterisk sends. Asterisk sends all numbers in on piece the pbx expects the numbers devided into international prefix, national...

...ted. I cannot find any explanation for this 'feature' at all - it doesn't seem that anybody else has had this problem at all, so I am at a loss as to what to do. Various documentation also talks about 'pri_dialplan' which doesn't seem to be supported any more, and also 'prilocaldialplan' which doesn't seem to be documented anywhere, but also doesn't seem to make any difference to this problem. Does anybody have any idea where I should be looking to try to find the answers? I'm more than happy to do the reading/learning myself - all I need is a starting point. I...

...access there which makes it harder to google around on location. switchtype = euroisdn is pretty obvious but what about these settings: signalling = bri_cpe_ptmp ; p2p TE mode ;signalling = bri_cpe ; p2mp NT mode ;signalling = bri_net_ptmp ; p2p NT mode ;signalling = bri_net pridialplan=local prilocaldialplan=local ; trust user provided callerid (clip no screening)? pritrustusercid = yes immediate=yes channel => 1-2 Thanks!!

..._capi that allways worked fine, however i had to define the national and international prefixes in capi.conf. Is there something similar in zapata.conf ? Here is my zapata.conf: [channels] musiconhold=default ; ; ISDN ; switchtype = euroisdn ; HFC-S TE mode signalling = bri_cpe_ptmp prilocaldialplan = national pridialplan = unknown echocancel = yes immediate = yes group = 1 context = inbound-zap channel => 1-2 switchtype = euroisdn ; HFC-S NT mode signalling = bri_net_ptmp prilocaldialplan = local overlapdial = no echocancel = ye...

Hi I'm beginner in list. I have doubts about the options pridialplan and prilocaldiaplan in chan_dahdi.conf. I interconnect the Asterisk with a Siemens PBX, but i saw that the changes in the file do not take effect in debug of the span or calling/called number. How to use this options? In that cases to use? Ps.: sorry for the english, i'm brazilian. Thanks -- Att, Rafael Saraiva

Perfect, thanks very much hth. I just set it to unknown, but it doesn't work. Have I to use also prilocaldialplan ? Thanks again Giordano ________________________________ Da: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] Per conto di Colin Anderson Inviato: gioved? 29 settembre 2005 16.22 A: 'Asterisk Users Mailing List - Non-Commercial Discussion' O...

...ensions.conf *** [from-isdn] exten => 518,1,Dial(Zap/g2/907748xxxxxx) exten => 521,1,Dial(Zap/g2/228) *** zapata.conf *** [channels] language=en rxwink=300 switchtype=euroisdn nationalprefix= <- also tried 0 and 90 here internationalprefix= <- tried 00 here signalling = bri_cpe_ptmp prilocaldialplan=local pridialplan=local rxgain=3.0 txgain=3.0 echocancel=64 echotraining=yes echocancelwhenbridged=yes immediate=no overlapdial=no group = 1 context=from-isdn channel => 1-2 signalling = bri_cpe_ptmp pridialplan=local prilocaldialplan=local rxgain=3.0 txgain=3.0 echocancel=64 echotraining=yes e...

Hello, I have a little problem with signalling. An E100p is connected to an Alcatel PBX, wich has an E1 to the outside. Located in Germany. zapata.conf: switchtype=euroisdn pridialplan=local prilocaldialplan=local overlapdial=yes signalling=pri_cpe .... With asterisk 1.0.2 I can call from a SIP phone to a phone connected to the Alcatel and the SIP number is correctly displayed at the caller. Let's say SIP phone is 12345, then 12345 is displayed. Asterisk cvs head 2004.12.16.23.00.00 seems to ignor...

...only missing stuff is to add a "0" as a prefix to each incoming call, to make it possible to answer missed call lists. I'm using the 0 as the prefix for outside lines. I've experimented a little with the prefix settings in zapata.conf, but without success: pridialplan=national ;prilocaldialplan=unknown ;pridialplan = unknown ;prilocaldialplan = dynamic nationalprefix = 00 internationalprefix = 000 Is there a way to debug the ISDN messages coming on my D-channel, like it is shown with misdn? I would like to see the dialplan settings coming from the Network side. best regards -- Alexande...

...Digium E1 cards(ISDN). Everything went smoothly as there are tons of information out there, except for the TON number. If you have worked in Telecommunication you will know the importance of TON flexibility. All the posts online suggested to update under Chan_dahdi.conf: pridialplan = international prilocaldialplan = international or other TON value ,restart the platform and then trixbox1*CLI> dialplan reload I have already done this with no success. Are there other changes I have to make in order to change dialplan? Br -------------- next part -------------- An HTML attachment was scrubbed... URL:...

...HFC-Cards ?? Can you please give me a hint, and which Telco-Carrier you use ?? TIA for all help regarding this..... Here the setup: zaptel.conf: span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 zapata.conf: switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes overlapdial=no immediate=no group = 3 context=vonaussenkommend channel => 1-2 switchtype = euroisdn signalling = bri_cpe pridialplan=local prilocaldialplan=local echocancel=yes echocancelwhenbridged=yes echotrainig=yes threewaycalli...

...it for bri_net? Does anyone have a working configuration that overcomes thoses problems? Regards, Ben ; Zapata telephony interface ; ; Configuration file [channels] switchtype = euroisdn overlapdial=no echocancel=yes echocancelwhenbridged=yes pridialplan = unknown prilocaldialplan = local context=isdn-in group = 1 signalling = bri_cpe_ptmp channel => 1-2 context=local signalling = bri_net_ptmp group = 3 channel => 4-5 ; ; extensions.conf ; [local] include => parkedcalls include => ntout include => conference exten => 903,1...

...53890977 1311504670 IO-APIC-level t4xxp They have their full 31 channels: span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=7,0,0,ccs,hdb3,crc4 bchan=187-201,203-217 dchan=202 And properly configured in zapata: group = 3 context=unused switchtype=national pridialplan=unknown prilocaldialplan=unknown signalling = pri_net channel => 63-77,79-93 group = 7 context=unused switchtype=national pridialplan=unknown prilocaldialplan=unknown signalling = pri_cpe overlapdial=no channel => 187-201,203-217 And on them, both the span 3 interfaces gives huge amount of HDLC errors in...

Hi, after a few of upgrades, I noticed these messages in full debug log: Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring switchtype Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring pridialplan Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring prilocaldialplan Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring overlapdial Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring internationalprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring nationalprefix Jun 21 12:58:11 WARNING[27273] chan_zap.c: Ignoring localprefix Jun 21 12:58:11 WARNING[27273] c...

Does anyone know, how I can increase the timout value for the ISDN implses, so asterisk waits for the extension on the ISDN channel? Regards, martin My zapata.conf: [trunkgroups] [channels] language=de pridialplan=local prilocaldialplan=local nationalprefix = 00 internationalprefix = 000 ; trust user provided callerid (clip no screening)? pritrustusercid = yes ; hidecallerid=no callerid=asreceived switchtype = euroisdn signalling = bri_cpe pridialplan = local prilocaldialplan = local echocancel = yes echocancelwhenbridged=no echo...

hi. could somebody explain how exactly the following parameters in zapata.conf work: pridialplan prilocaldialplan internationalprefix nationalprefix localprefix privateprefix unknownprefix the wiki & comments doesn't quite explain them. and phone companies are absolutely no help. i've setup systems in the US & China with trial & error until it works. now i'm setting up a system in Japa...