Hi
I'm from spain, so forgive my English. I'm somewhat new to
asterisk, and i'm having trouble in getting my line to work (i'm in a
little hurry!). I have an E100P, and it seems everything is configured
ok, but when receiving a call, I get the following message "D-Channel on
span 1 up" (four times), then the call ends, asterisk says "D-Channel
on
span 1 down". And that's all.
My telco says they reveive no answer on the line. Asterisk gets
the call and does nothing.
I have done the cable from the modem to the card myself,
crossing pins 1 and 2 with 4 and 5 respectively, as my telco has told
me, and the card shows a greed led (not the flashing red I had when
using a LAN crossover cable). Can the cable be the problem?
I'm using asterisk CVS-05/11/04-17:24:48
Zaptel.conf
--------------
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
loadzone = es
defaultzone=es
Zapata.conf:
--------------
[channels]
language=es
context=default
switchtype=euroisdn
signalling=pri_cpe
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
callgroup=1
pickupgroup=1
immediate=no
jitterbuffers=4
group = 1
channel => 1-15,17-31
I have also tried with
span=1,0,0,ccs,hdb3
I have asked for crc, but its not active in my telco.
Can anyone help?
By the way, how can I print information on zap
"intensive" debugging to a file in case I need to post?
Thanks a lot!
