search for: hdb3

Hi all, Does somebody know how I have to setup my TE405P ? Is it correct my configuration below ? Otherwise, can somebody help me ? Thanks, Angel. zaptel.conf span=1,1,0,ccs,hdb3 span=2,0,1,ccs,hdb3 span=3,0,1,ccs,hdb3 span=4,0,1,ccs,hdb3 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 bchan=1-15 dchan=16 bchan=17-31 zapata.conf [channels] context=default swit...

...npipe.conf files are similar) [devices] wanpipe1 = WAN_AFT_TE1, Comment [interfaces] w1g1 = wanpipe1, , TDM_VOICE, Comment [wanpipe1] CARD_TYPE = AFT S514CPU = A CommPort = PRI AUTO_PCISLOT = NO PCISLOT = 4 PCIBUS = 5 FE_MEDIA = E1 FE_LCODE = HDB3 FE_FRAME = NCRC4 FE_LINE = 1 TE_CLOCK = NORMAL TE_REF_CLOCK = 0 TE_SIG_MODE = CCS TE_HIGHIMPEDANCE = NO TE_RX_SLEVEL = 430 LBO = 120OH FE_TXTRISTATE = NO MTU = 1500 UDPPORT = 9000 TTL = 255 IGNORE_FRONT_END...

...ips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 - second port. To PBX. span=3,2,0,ccs,hdb3 #TE420 - third port. To PSTN. span=4,0,0,ccs,hdb3 #TE420 - fourth port. To PBX. span=5,3,0,ccs,hdb3 #TE220 - first port. To PSTN. span=6,0,0,ccs,hdb3 #TE220 - second port. To PBX. I should to say, th...

Hi whatever I set the span line to in zaptel.conf ie span=1,0,0,ccs,hdb3,crc4 span=1,1,0,ccs,hdb3,crc4 span=1,2,0,ccs,hdb3,crc4 zttool always shows Sync Source: Internally clocked surely this cannot be correct.

...RIs, but the problem stayed persistent on the same span. Anyone ever run into a Problem like this aswell? I haven't found any solution so far so i ask here. asterisk/zaptel/libpri are all lates stable out of the 1.2 branch and these are the related configs: /etc/zaptel.conf: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 dchan=47 span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 dchan=78 span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 dchan=109 span=5,0,0,ccs,hdb3,crc4 bchan=125-139,141-155 dchan=140 span=6,0,0,ccs,hdb3,crc4 bchan=156-170,172-186...

...76 channel => 32-46 channel => 48-62 etc\zaptel.conf # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" # span=3,3,0,ccs,hdb3 # termtype: te # bc...

I have my peers registered to SER.asterisk seems to be sending mwi for the peers seen in the sip show peers CLI command. i have my ser server registered with asterisk as a type=friend and all clients register to ser.how do i get mwi to work for these clients registered to SER. Thank you, -AA

...--->(Loop)E1 port 2---->sip extension local. kindly can any can help me to draw this dialpan in the extensions.conf Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO T4XXP (PCI) Card 0 Span 1 OK 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Span 2 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Span 3 RED 0 0 0 CCS HDB3 CRC4 0 db (CSU)/0-133 feet (DSX-1) T4XXP (PCI) Card 0 Sp...

Hello ml, i need some help on my zaptel configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a configuration problem. Can anyone give me a hint how to configure my E100P? Thank you for your h...

...emonstrated by executing dahdi_scan: [1] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 1 name=TE2/0/1 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=1 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS [2] active=yes alarms=RED description=T2XXP (PCI) Card 0 Span 2 name=TE2/0/2 manufacturer=Digium devicetype=Wildcard TE220 (4th Gen) location=Board ID Switch 0 basechan=32 totchans=31 irq=16 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) co...

...d Knoppix CD which seemed to be compatible with compiling this old code. I had do the "make install" from the new system because it is not possible to install applications on a CD system. It appears there is a missing file, make install fails with: ..... make[2]: Entering directory `/mnt/hdb3/home/crashedagain/wine-20040121/dlls/cabinet' ../../tools/mkinstalldirs -m 755 /usr/local/lib/wine /usr/bin/install -c cabinet.dll.so /usr/local/lib/wine/cabinet.dll.so make[2]: Leaving directory `/mnt/hdb3/home/crashedagain/wine-20040121/dlls/cabinet' cd `dirname capi2032/__install__` &a...

...(1:0/1/0) -- Auto fallthrough, channel 'SIP/98.34.56.216-0000000e' status is 'CONGESTION' Cisco Gateway show controller Controller E1 slot(0)/port(0) E1 Link is UP No Alarm detected. Applique type is Channelized E1. Framing is CRC4, Line Code is HDB3. Signalling type is R2-MFC. 0 Line Code Violations, 0 Framing Bit Errors 0 Far End Block Errors, 0 CRC Errors signalling type = r2 clock source = slave channel group 0 = 1-31 1 2 3 allocated timeslots = YYYYY...

...starts blinking, alarm lights red, with display saying "Loss of carrier - (LOS - no T1), Asterisk and zttool detecting yellow alarm. The upper right corner of the displays says WINK ESF. Any ideas? Thanks in advance! ZAPTEL.CONF: span=1,1,0,ccs,hdb3,yellow span=2,2,0,ccs,hdb3,yellow #2,2,0 span=3,3,0,ccs,hdb3,yellow #3,3,0 span=4,0,0,esf,b8zs bchan=1-15,17-31 bchan=32-46,48-62 bchan=63-77,79-93 dchan=16,47,78 fxoks=94-117 loadzone=us #es defaultzone=us #es...

...multiboot on my main machine. There's a Debian Etch install on /dev/hda, and GRUB is also installed on the Debian side. On /dev/hdb, I have CentOS 5. I fdisked the drive manually, then chose manual partitioning during install. The setup for CentOS is: hdb1 -> swap hdb2 -> /boot, ext2 hdb3 -> / , ext3 After completing the install, I rebooted on the Debian side and edited menu.lst like this: <snip> title Debian GNU/Linux, kernel 2.6.18 root (hd0,1) kernel /vmlinuz-2.6.18 root=/dev/hda3 vga=788 ro initrd...

...spans. Is that correct? [1] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 1 name=TE4/0/1 manufacturer=Digium devicetype=Wildcard TE420 (4th Gen) (VPMOCT128) location=Board ID Switch 0 basechan=1 totchans=31 irq=177 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 feet (DSX-1) coding_opts=HDB3 framing_opts=CCS,CRC4 coding=HDB3 framing=CCS [2] active=yes alarms=OK description=T4XXP (PCI) Card 0 Span 2 name=TE4/0/2 manufacturer=Digium devicetype=Wildcard TE420 (4th Gen) (VPMOCT128) location=Board ID Switch 0 basechan=32 totchans=31 irq=177 type=digital-E1 syncsrc=0 lbo=0 db (CSU)/0-133 fee...

...channels and the second one with 30 channels. When I try to load zaptel modules, I get an error message: "Loading zaptel framework: Loading zaptel hardware modules: wct1xxp wcusb Running ztcfg: ZT_CHANCONFIG failed on channel 63: No such device" Follows my zaptel.conf: span=1,0,0,ccs,hdb3 bchan=1-15 dchan=16 span=2,0,0,ccs,hdb3 bchan=33-47,49-63 dchan=48,64 Any clue? Daniel

...ot of entries like "pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" This happens on a regular basis and the E1 becomes up after some time. My zaptel.conf is as follows: # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 hardhdlc=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 hardhdlc=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" span=3,3,0,ccs,hdb3 # termtype: te bchan=63-77,79-93 hardhdlc=78 # Span 4:...

...76 channel => 32-46 channel => 48-62 etc\zaptel.conf # Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not hand edit # Zaptel Configuration File # # This file is parsed by the Zaptel Configurator, ztcfg # # Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED span=1,1,0,ccs,hdb3 # termtype: te bchan=1-15,17-31 dchan=16 # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED span=2,2,0,ccs,hdb3 # termtype: te bchan=32-46,48-62 dchan=47 # Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3" # span=3,3,0,ccs,hdb3 # termtype: te # bc...

Hello. I have a TE212 configured in E1 mode. This is shown in a cat /proc/zaptel/2 and 3 (where the card is configured): cat /proc/zaptel/2 Span 2: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" HDB3/CCS/CRC4 RED NOTOPEN 25 TE2/0/1/1 Clear 26 TE2/0/1/2 Clear 27 TE2/0/1/3 Clear 28 TE2/0/1/4 Clear 29 TE2/0/1/5 Clear 30 TE2/0/1/6 Clear 31 TE2/0/1/7 Clear 32 TE2/0/1/8 Clear 33 TE2/0/1/9 Clear 34 TE2...

I have 7965 and am trying to convert the firmware to SIP (SIP45.8-3-4SR1S). Does anyone have a valid XMLDefault.cnf.xml they could share? I have tried the version at voip-info<info.org/wiki/view/Asterisk+phone+cisco+79x1+xml+configuration+files+for+SIP&view_comment_id=14768#Troubleshooting>for the 7941/7961 but unfortunately /var/log/messages shows in.tftp stops sending after