Hi Scott,
make sure that ztcfg is only run once. Modprobing the e100p driver
probably triggers this automatically.
I am still investigating why qozap/zaptel becomes unhappy when
ztcfg is run twice.
If you want me to take a look via ssh, let me know.
best regards
Klaus
Am Do, den 12.08.2004 schrieb Scott Stingel um 12:40:> Hi-
>
> Anyone using the Junghann's quad BRI card and the Digium E100P in the
same
> system?
>
> I'm having a configuration problem where I can configure the cards one
at a
> time (with the appropriate drivers loaded) in a system, but when I try them
> both together, neither will work. They both work fine one at a time.
> Probably has something to do with the channel numbering.
>
> I've tried numbering the channels with the E1 first (which produces
lots of
> modprobe errors), and then with the BRI span's first, which produces no
> modprobe errors, but doesn't work. Here is the latter configuration:
>
> ZAPTEL.CONF (excerpt):
> # qozap span definitions
> # most of the values should be bogus because we are not really zaptel
> span=1,1,3,ccs,ami
> span=2,0,3,ccs,ami
> span=3,0,3,ccs,ami
> span=4,0,3,ccs,ami
>
> # E1 definition:
> span=5,0,0,ccs,hdb3,crc4
>
> #BRI's:
> bchan=1,2
> dchan=3
> bchan=4,5
> dchan=6
> bchan=7,8
> dchan=9
> bchan=10,11
> dchan=12
>
> #E1:
> bchan=13-27,29-43
> dchan=28
>
> ---------------------------------------
>
> ZAPATA.CONF (excerpt)
> switchtype = euroisdn
>
> ; p2mp TE mode (for connecting ISDN lines in point-to-multipoint mode)
> signalling = bri_cpe_ptmp
>
> ; define 4 BRI's:
> pridialplan = unknown
> prilocaldialplan = unknown
> echocancel = yes
>
> context=incoming
> group = 1
> ; S/T port 1
> channel => 1-2
>
> group = 2
> ; S/T port 2
> channel => 4-5
>
> group = 3
> ; S/T port 3
> channel => 7-8
>
> group = 4
> ; S/T port 4
> channel => 10-11
>
> ; E1 - for output to external Dialogic only
> ; we are pri_net in this case
>
> group = 9
> pridialplan = unknown
> signalling=pri_net
> channel => 13-27,29-43
>
> ------------------------------------------
>
> STARTUP MODPROBES, ETC:
> #following for Quad BRI system:
> cd /usr/src/bri/bri-stuff.0.1.0-RC2g/qozap
> modprobe -v zaptel >>/var/log/asterisk/modprobe.log
> sleep 1
> insmod -v qozap.o >>/var/log/asterisk/modprobe.log
> sleep 1
>
> # following for single E1 system
> modprobe -v wct1xxp >>/var/log/asterisk/modprobe.log
> sleep 2
>
> ztcfg -vv >>/var/log/asterisk/modprobe.log
> sleep 3
> echo >>/var/log/asterisk/modprobe.log
>
> -------------------------------
>
> Thanks for any help!
> Regards
>
> Scott M. Stingel
> President,
> Emerging Voice Technology, Inc.
> Palo Alto California & London England
> www.evtmedia.com
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users@lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users