Hi ! I'm trying to configurate my first asterisk system. My test plant has an E100P Card and a 4 FXS TDM 400P card. I've an E1 configured for 15 channels. Telco says that crc4 is configurated so my zaptel.conf is: loadzone = it defaultzone=it span=1,0,0,ccs,hdb3,crc4 bchan=1-15 dchan=16 unused=17-31 fxoks=32-35 zttool shows no alarms. I've also tried changing the timing configuration. == Primary D-Channel on span 1 up == Primary D-Channel on span 1 up Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! Not good - head of queue has not been transmitted yet == Primary D-Channel on span 1 down Oct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No D-channels available! Using Primary on channel anyway 16! Does anyone have any idea what's wrong ? Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041026/fbc72a4c/attachment.htm
> I'm trying to configurate my first asterisk system. > > My test plant has an E100P Card and a 4 FXS TDM 400P card. > > I've an E1 configured for 15 channels. > Telco says that crc4 is configurated so my zaptel.conf is: > > loadzone = it > defaultzone=it > span=1,0,0,ccs,hdb3,crc4 > bchan=1-15 > dchan=16 > unused=17-31 > fxoks=32-35 > zttool shows no alarms. > > > I've also tried changing the timing configuration. > > > == Primary D-Channel on span 1 up > == Primary D-Channel on span 1 up > Oct 26 14:15:56 WARNING[11275]: chan_zap.c:7133 zt_pri_error: PRI: !! > Not good - head of queue has not been transmitted yet > == Primary D-Channel on span 1 down > Oct 26 14:15:57 WARNING[11275]: chan_zap.c:1913 pri_find_dchan: No > D-channels available! Using Primary on channel anyway 16! > Does anyone have any idea what's wrong ?Maybe your E1 is configured for CAS not CCS. At least that caused a similar error for me. Chris
I am trying to configure E1 card (Digium) but not able to do that. The green light doesn't come up when it starts. What can be the problem. I have also changed the jumper settings of the card from T1 to E1 but still no relief. Thanks in advance Manish