Displaying 20 results from an estimated 646 matches for "bchan".
Did you mean:
chan
2004 Aug 12
5
Question about TE405P
Hi all,
Does somebody know how I have to setup my TE405P ?
Is it correct my configuration below ? Otherwise, can somebody help me ?
Thanks,
Angel.
zaptel.conf
span=1,1,0,ccs,hdb3
span=2,0,1,ccs,hdb3
span=3,0,1,ccs,hdb3
span=4,0,1,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes...
2009 Dec 08
2
E1 Channel Numbering - Your Comments.
...ly
expected the last B-channel at 127 where it was actually at 124 (my
first time with E1s). As telcom lingo goes I have seen this 32nd
channel referred to as "time slot 0" and as "framing channel" and
expect there to be other names as well.
As an example, the current method:
bchan=1-15
dchan=16
bchan=17-31
...
bchan=32-46
dchan=47
bchan=48-62
...
bchan=63-77
dchan=78
bchan=79-93
...
bchan=94-108
dchan=109
bchan=110-124
and an example of my first thoughts:
bchan=1-15
dchan=16
bchan=17-31
uchan=32
...
bchan=33-47
dchan=48
bchan=49-63
uchan=64
...
bchan=65-79
dchan=80
bchan=8...
2005 Jul 28
1
how to loop E400P card to test ?Any help will be appreciated.
...ype=national
pridialplan=unknown
group=1
channel=>1-15
channel=>17-31
group = 2
channel => 32-46
channel => 48-62
group = 3
channel => 63-77
channel => 79-93
group = 4
channel => 94-108
channel => 110-124
------------------------
zaptel.conf
span=1,1,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,1,0,ccs,hdb3,crc4
bchan=63-77
dchan=78
bchan=79-93
span=4,1,0,ccs,hdb3,crc4
bchan=94-108
dchan=109
bchan=110-124
--------------------------
extensions.conf
[default]
include => from-sip
[from-sip]
exten...
2006 Aug 28
3
lost packets when bridging zap and iax
...ng=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
group = 1
channel => 1-15
channel => 17-31
channel => 32-46
channel => 48-62
channel => 63-77
channel => 79-93
channel => 94-108
channel => 110-124
/etc/asterisk# cat /etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,1,0,ccs,hdb3
bchan=63-77
dchan=78
bchan=79-93
span=4,1,0,ccs,hdb3
bchan=94-108
dchan=109
bchan=110-124
loadzone=it
defaultzone=it
2009 Nov 27
1
ISDN30 Timing Sources (Jon Morgan)
Quoth Jon Morgan <jon.morgan at motors.co.uk>
>
>We have a 2 port Digium TE220P card, one span is configured to connect to our ISDN30 provider (British Telecom), the other span connects to our internal PBX. Here's the zaptel.conf snip:
>
>span=1,1,0,ccs,hdb3,crc4
>bchan=1-15
>dchan=16
>bchan=17-31
>
>span=2,0,0,ccs,hdb3,crc4
>bchan=32-46
>dchan=47
>bchan=48-62
FWIW, I (also BT ISDN30 on span 1 with a PBX on the second port of a
TE205P) have the following zaptel.conf.
span=1,1,1,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,0,1,cc...
2011 Feb 04
3
PRI voice optimization
...ation as well.
# Autogenerated by /usr/local/sbin/genzaptelconf -- do not hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# It must be in the module loading order
# Global data
loadzone = in
defaultzone = in
span = 1,0,0,ccs,hdb3
bchan = 1-15
dchan = 16
bchan = 17-31
span = 2,0,0,ccs,hdb3
bchan = 32-46
dchan = 47
bchan = 48-62
span = 3,0,0,ccs,hdb3
bchan = 63-77
dchan = 78
bchan = 79-93
span = 4,0,0,ccs,hdb3
bchan = 94-108
dchan = 109
bchan = 110-124
[channels]
language=en
context=from-pstn
switchtype=euroisdn
p...
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...= NO # YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz
events from hardware
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
MTU = 8
/etc/dahdi/system.conf:
defaultzone=be
loadzone=be
span=1,1,0,ccs,hdb3
dchan=16
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
span=2,2,0,ccs,hdb3
dchan=47
bchan=32-46,48-62
echocanceller=mg2,32-46,48-62
span=3,3,0,ccs,hdb3
dchan=78
bchan=63-77,79-93
echocanceller=mg2,63-77,79-93
span=4,4,0,ccs,hdb3
dchan=109
bchan=94-108,110-124
echocanceller=mg2,94-108,110-124
span=5,5,0,ccs,hd...
2005 Jun 08
1
EuroISDN Italy - quadbri - zaptel.conf - what settings work ?
...;1". For a secondary, use "2", and so on.
# To not use this as a sync source, just use "0"
#
loadzone=it
defaultzone=it
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
span=5,0,3,ccs,ami
span=6,0,3,ccs,ami
span=7,0,3,ccs,ami
span=8,0,3,ccs,ami
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12
bchan=13,14
dchan=15
bchan=16,17
dchan=18
bchan=19,20
dchan=21
bchan=22,23
dchan=24
I get this on bri intense debug...
> Unnumbered frame:
> SAPI: 63 C/R: 0 EA: 0
> TEI: 127 EA: 1
> M3: 0 P/F: 0 M2: 0...
2006 Mar 07
5
MWI, SER and asterisk
I have my peers registered to SER.asterisk seems to be sending mwi for
the peers seen in the sip show peers CLI command. i have my ser server
registered with asterisk as a type=friend and all clients register to
ser.how do i get mwi to work for these clients registered to SER.
Thank you,
-AA
2005 Jun 06
0
D channel initialization
...call manually once again, and again... you
get the picture :(
The Siemens guy tells me that this is a problem with the D channel. I
tried to change the timing for this cirtuit, in zaptel.conf. No positive
results.
Configuration files follows:
loadzone = us
defaultzone=us
span=1,0,0,ccs,hdb3,crc4
bchan=1-15
dchan=16
bchan=17-31
span=2,0,0,ccs,hdb3,crc4
bchan=32-46
dchan=47
bchan=48-62
span=3,0,0,ccs,hdb3,crc4
bchan=63-77
dchan=78
bchan=79-93
span=4,0,0,ccs,hdb3,crc4
bchan=94-108
dchan=109
bchan=110-124
span=5,0,0,ccs,hdb3,crc4
bchan=125-139
dchan=140
bchan=141-155
span=6,0,0,ccs,hdb3,crc4
bchan=1...
2012 Dec 21
2
dahdi timing source multiple cards
I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting
slips and ask me to update the clock source. I have my system.conf set as
the following but when I run dahdi_scan only the ports on Card 1 are showing
up with syncsrc=1
system.conf :
span=1,1,0,esf,b8zs
bchan=2-24
mtp2=1
span=2,2,0,esf,b8zs
bchan=26-48
mtp2=25
span=3,3,0,esf,b8zs
bchan=49-72
span=4,4,0,esf,b8zs
bchan=73-96
span=5,5,0,esf,b8zs
bchan=97-120
span=6,6,0,esf,b8zs
bchan=121-144
span=7,7,0,esf,b8zs
bchan=145-168
span=8,8,0,esf,b8zs
bchan=169-192
span=9,...
2004 Jul 29
6
Zaptel doesn't see remote hangup ? euro-isdn
...my AS5300.
Am I missing something ? How do I debug the Zap channels ?
Cheers,
Walter Klomp
/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4 # This is the line in question...
span=2,1,0,ccs,hdb3,crc4 # not used yet
span=3,0,0,ccs,hdb3,crc4 # not used yet
span=4,0,0,ccs,hdb3,crc4 # not used yet
# Span 1
bchan=1-15
dchan=16
bchan=17-31
# Span 2
bchan=32-46
dchan=47
bchan=48-62
# Span 3
bchan=63-77
dchan=78
bchan=79-93
# Span 4
bchan=94-108
dchan=109
bchan=110-124
alaw=1-124
loadzone=uk
defaultzone=uk
/etc/asterisk/zapata.conf
[channels]
context=default
switchtype=euroisdn
signalling=pri_cpe
usecalleri...
2007 Jun 28
2
E1 not coming up
...he problem stayed persistent
on the same span.
Anyone ever run into a Problem like this aswell? I haven't found any
solution so far so i ask here.
asterisk/zaptel/libpri are all lates stable out of the 1.2 branch
and these are the related configs:
/etc/zaptel.conf:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
span=2,0,0,ccs,hdb3,crc4
bchan=32-46,48-62
dchan=47
span=3,0,0,ccs,hdb3,crc4
bchan=63-77,79-93
dchan=78
span=4,0,0,ccs,hdb3,crc4
bchan=94-108,110-124
dchan=109
span=5,0,0,ccs,hdb3,crc4
bchan=125-139,141-155
dchan=140
span=6,0,0,ccs,hdb3,crc4
bchan=156-170,172-186
dchan=171...
2009 Dec 28
2
Multiple Digium cards with one NFAS trunkgroup
....
Any ideal on what would cause this? I tried the latest Zaptel and then a
older version to, same issue.
Here is what the config files look like, any help would be great on this,
ive Googled and can't seem to find what else to try!
zaptel.conf
loadzone=us
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
span=3,1,0,esf,b8zs
bchan=49-72
#dchan=72
span=4,1,0,esf,b8zs
bchan=73-96
#dchan=96
span=5,1,0,esf,b8zs
bchan=97-120
#dchan=120
span=6,1,0,esf,b8zs
bchan=121-144
#dchan=144
zapata.conf
[trunkgroups]
trunkgroup => 1,24,48
spanmap =>...
2007 Apr 24
1
TE412P (T1/E1+DSP) digium card cause server crash
...800FSB 2MB cache *2
Memory: 512M ECC REG DDRII400 * 2 (1G)
Storage: 3ware SATA RAID 0 card /80G SATA HD *2
OS: Linux 2.6.11-gentoo-r6
Asterisk 1.2.1 + libpri-1.2.3 + Zaptel 1.2.16
Zaptel configuration:
-------------------------------
### Zaptel.conf --> Span: 1 (E1_4) Board 1
span=1,1,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
### Zaptel.conf --> Span: 2 (E1_4) Board 1
span=2,1,0,ccs,hdb3
bchan=32-46
dchan=47
bchan=48-62
### Zaptel.conf --> Span: 3 (E1_4) Board 1
span=3,1,0,ccs,hdb3
bchan=63-77
dchan=78
bchan=79-93
### Zaptel.conf --> Span: 4 (E1_4) Board 1
span=4,1,0,ccs,hdb3
bchan=94-...
2005 Feb 13
3
Sangoma A102 cards testing
...S (8) on Primary D-channel of span 2
No D-channels available! Using Primary on channel anyways 47!
PRI: !! Not good - head of queue has not been transmitted yet
I've tried everything i can think off with the wancfg configuration files
here is my zaptel and zapata configs.
span=1,0,0,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
span=2,1,0,ccs,hdb3
bchan=32-46
dchan=47
bchan=48-62
--------------------------
zapata.conf
switchtype=euroisdn
signalling=pri_net
group=1
channel=>1-15
channel=>17-31
group=2
signalling=pri_cpe
channel=>32-46
channel=>48-62
-------------------------------...
2005 Jun 11
4
PRI Trouble
...following error on my PRI line
which connects my asterisk server to a Norstar 0x32 key system.
The asterisk zaptel.conf file was configure as follows and this config
worked for 6 months until friday. Nothing was changed on either system
prior to friday. here is teh zaptel.conf
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
To try to fix the problem i changed the timing on span 2 from 0 to 1
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
However i still get the same error. Please help we cannot connect call
form my norstar to...
2010 Dec 05
2
HA8 cards and RED alarm
...e use NVFaxDetect stuff for this
;
;faxdetect=both
;faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no
group=1
signalling=bri_cpe
context=isdn
channel => 1,2,4,5,7,8,10,11,13,14,16,17,19,20,22,23
SrvPhone2:/etc/dahdi# cat system.conf
loadzone = be
defaultzone = be
span = 1,1,0,ccs,ami
bchan = 1,2
hardhdlc = 3
span = 2,2,0,ccs,ami
bchan = 4,5
hardhdlc = 6
span = 3,3,0,ccs,ami
bchan = 7,8
hardhdlc = 9
span = 4,4,0,ccs,ami
bchan = 10,11
hardhdlc = 12
span = 5,5,0,ccs,ami
bchan = 13,14
hardhdlc=15
span = 6,6,0,ccs,ami
bchan = 16,17
hardhdlc = 18
span = 7,7,0,ccs,ami
bchan = 19,20
ha...
2006 Apr 27
12
PRIs from two different telco
...an 1 and span 2). I can get one working, but not the other. However,
if I use vpmsupport=0 when loading the wct4xxp module, they both work.
But here is the problem, vpmsupport=0 disables the on board echo
cancellation. Any ideas?
BTW, here is zaptel.conf
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
loadzone=us
defaultzone=us
2013 Mar 21
2
Need help about round-robin
...\zaptel.conf
# Autogenerated by /usr/sbin/zapconf on Wed Feb 20 10:13:17 2013 -- do not
hand edit
# Zaptel Configuration File
#
# This file is parsed by the Zaptel Configurator, ztcfg
#
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS RED
span=1,1,0,ccs,hdb3
# termtype: te
bchan=1-15,17-31
dchan=16
# Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS RED
span=2,2,0,ccs,hdb3
# termtype: te
bchan=32-46,48-62
dchan=47
# Span 3: TE4/0/3 "T4XXP (PCI) Card 0 Span 3"
# span=3,3,0,ccs,hdb3
# termtype: te
# bchan=63-77,79-93
# dchan=78
# Span 4: TE4/0/4 &qu...