A couple things:
In zapata.conf, the channels line should be:
channel => 1-15,17-31
If you are connected to the PSTN, the signalling should be pri_cpe (customer
premise equipment). But your setting would be correct for connection to a
channel bank I think.
Hope this helps
Scott
Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com
-----Original Message-----
From: asterisk-users-admin@lists.digium.com
[mailto:asterisk-users-admin@lists.digium.com] On Behalf Of Horacio J. Pe?a
Sent: Monday, August 02, 2004 8:55 PM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] help with digium E1 card
Hola!
I've a Digium E1 card, zaptel recognizes it as (loading the module with
debug=1)
Setting up DMA (write/read = 321b2000/321b2200) Controller version: 43
Framer: DS21554, Revision: 5 (E1)
Found a Wildcard: Digium Wildcard E100P E1/PRA Using CCS/HDB3 coding/framing
with CRC4 120 Ohms Calling startup (flags is 4099) Started DMA Got
interrupt: 0x0005
/etc/zaptel.conf:
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
/etc/asterisk/zapata.conf:
[channels]
context=default
switchtype=euroisdn
signalling=pri_net
group=1
channel => 1-31
asterix fails with:
Aug 3 00:59:23 ERROR[16384]: chan_zap.c:5352 mkintf: Signalling requested
is PRI Signalling but line is in Unknown signalling 896 signalling Aug 3
00:59:23 ERROR[16384]: chan_zap.c:7376 setup_zap: Unable to register channel
'1-31'
Aug 3 00:59:23 WARNING[16384]: loader.c:313 ast_load_resource: chan_zap.so:
load_module failed, returning -1 Aug 3 00:59:23 WARNING[16384]:
loader.c:408 load_modules: Loading module chan_zap.so failed!
What could be happening?
Thanks,
HoraPe
---
Horacio J. Pe?a
horape@compendium.com.ar
horape@uninet.edu
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users