Sorry, <4 x i8> should convert to a <1 x i32>. What currently is happening is that it is returning a <2 x i32> because <1 x i32> does not exist. Micah> -----Original Message----- > From: Rotem, Nadav [mailto:nadav.rotem at intel.com] > Sent: Monday, July 30, 2012 10:51 AM > To: Villmow, Micah; Developers Mailing List > Subject: RE: Vector promotion broken for <2 x [i8|i16]> > > > >Though I am having trouble in understanding how x86 supports the <1 x > i64> type. Based on looking at the code, it should fail because v1i64 > is not supported on the x86 platform as >far as I can tell. > > The Type-Legalizer can handle vector types in the following ways: > 1. Split - this splits vectors into two halves. For example on SSE4, > <4 x i64> is split to <2 x i64> > 2. Widen - this methods adds additional vector elements, but keeps the > element type. For example <3 x float> is legalized to <4 x float> > 3. Promote - this method widens each element in the vector. For example > SSE masks are promoted from <4 x i1> to <4 x i32> > 4. Scalarize - this method coverts vectors with a single element into a > scalar. For example, <1 x i64> into i64. > > >> The function getTypeToPromoteTo will return a <2 x i32> for a <2 x > i8>, <2 x i16> or <4 x i8>. > > The first two conversions look correct, and I assume that your target > declares v2i32 as a legal type. I am not sure how <4 x i8> got there. > Maybe it was first split, and after that promoted ? > > > > From: Rotem, Nadav [mailto:nadav.rotem at intel.com] > Sent: Saturday, July 28, 2012 12:56 PM > To: Villmow, Micah; Developers Mailing List > Subject: RE: Vector promotion broken for <2 x [i8|i16]> > > I think that you attached the wrong patch. The attached patch is the > one which adds the new MVT types. > > > > From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu] > On Behalf Of Villmow, Micah > Sent: Saturday, July 28, 2012 01:54 > To: Developers Mailing List > Subject: [LLVMdev] Vector promotion broken for <2 x [i8|i16]> > > Vector promotion which is new in LLVM 3.1 is broken for sub32 bit > types. The problem is in the VectorLegalizer::PromoteVectorOp. > The function getTypeToPromoteTo will return a <2 x i32> for a <2 x i8>, > <2 x i16> or <4 x i8>. The problem is that there are no vectors of size > 1 defined for i32 or i16. The attached patch fixes these issues. > > This can be reproduced by setting in any target: > setOperationAction(ISD::AND, MVT::i8, Promote); > setOperationAction(ISD::AND, MVT::v2i8, Promote); > setOperationAction(ISD::AND, MVT::i16, Promote); > > Let me know if this is good, > Micah > > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies.
I don't know how your target architecture looks like, but I suspect that <4 x i8> should not be legalized to <1 x i32>. I think that what you are seeing is that <4 x i8> is first split into <2 x i8>, and later promoted to <2 x i32>. At the moment different targets can only affect type-legalization by declaring different legal types. A number of us discussed the possibility of allowing different targets to override the decisions for different types. But at the moment this is only a plan. -----Original Message----- From: Villmow, Micah [mailto:Micah.Villmow at amd.com] Sent: Monday, July 30, 2012 21:05 To: Rotem, Nadav; Developers Mailing List Subject: RE: Vector promotion broken for <2 x [i8|i16]> Sorry, <4 x i8> should convert to a <1 x i32>. What currently is happening is that it is returning a <2 x i32> because <1 x i32> does not exist. Micah> -----Original Message----- > From: Rotem, Nadav [mailto:nadav.rotem at intel.com] > Sent: Monday, July 30, 2012 10:51 AM > To: Villmow, Micah; Developers Mailing List > Subject: RE: Vector promotion broken for <2 x [i8|i16]> > > > >Though I am having trouble in understanding how x86 supports the <1 > >x > i64> type. Based on looking at the code, it should fail because v1i64 > is not supported on the x86 platform as >far as I can tell. > > The Type-Legalizer can handle vector types in the following ways: > 1. Split - this splits vectors into two halves. For example on SSE4, > <4 x i64> is split to <2 x i64> > 2. Widen - this methods adds additional vector elements, but keeps the > element type. For example <3 x float> is legalized to <4 x float> 3. > Promote - this method widens each element in the vector. For example > SSE masks are promoted from <4 x i1> to <4 x i32> 4. Scalarize - this > method coverts vectors with a single element into a scalar. For > example, <1 x i64> into i64. > > >> The function getTypeToPromoteTo will return a <2 x i32> for a <2 x > i8>, <2 x i16> or <4 x i8>. > > The first two conversions look correct, and I assume that your target > declares v2i32 as a legal type. I am not sure how <4 x i8> got there. > Maybe it was first split, and after that promoted ? > > > > From: Rotem, Nadav [mailto:nadav.rotem at intel.com] > Sent: Saturday, July 28, 2012 12:56 PM > To: Villmow, Micah; Developers Mailing List > Subject: RE: Vector promotion broken for <2 x [i8|i16]> > > I think that you attached the wrong patch. The attached patch is the > one which adds the new MVT types. > > > > From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-bounces at cs.uiuc.edu] > On Behalf Of Villmow, Micah > Sent: Saturday, July 28, 2012 01:54 > To: Developers Mailing List > Subject: [LLVMdev] Vector promotion broken for <2 x [i8|i16]> > > Vector promotion which is new in LLVM 3.1 is broken for sub32 bit > types. The problem is in the VectorLegalizer::PromoteVectorOp. > The function getTypeToPromoteTo will return a <2 x i32> for a <2 x > i8>, > <2 x i16> or <4 x i8>. The problem is that there are no vectors of > size > 1 defined for i32 or i16. The attached patch fixes these issues. > > This can be reproduced by setting in any target: > setOperationAction(ISD::AND, MVT::i8, Promote); > setOperationAction(ISD::AND, MVT::v2i8, Promote); > setOperationAction(ISD::AND, MVT::i16, Promote); > > Let me know if this is good, > Micah > > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies. > --------------------------------------------------------------------- > Intel Israel (74) Limited > > This e-mail and any attachments may contain confidential material for > the sole use of the intended recipient(s). Any review or distribution > by others is strictly prohibited. If you are not the intended > recipient, please contact the sender and delete all copies.--------------------------------------------------------------------- Intel Israel (74) Limited This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
Hrmm.... PromoteVectorOp doesn't seem to follow this at all.
http://llvm.org/svn/llvm-project/llvm/trunk/lib/CodeGen/SelectionDAG/LegalizeVectorOps.cpp
SDValue VectorLegalizer::PromoteVectorOp(SDValue Op) {
// Vector "promotion" is basically just bitcasting and doing the
operation
// in a different type. For example, x86 promotes ISD::AND on v2i32 to
// v1i64.
EVT VT = Op.getValueType();
assert(Op.getNode()->getNumValues() == 1 &&
"Can't promote a vector with multiple results!");
EVT NVT = TLI.getTypeToPromoteTo(Op.getOpcode(), VT);
DebugLoc dl = Op.getDebugLoc();
SmallVector<SDValue, 4> Operands(Op.getNumOperands());
for (unsigned j = 0; j != Op.getNumOperands(); ++j) {
if (Op.getOperand(j).getValueType().isVector())
Operands[j] = DAG.getNode(ISD::BITCAST, dl, NVT, Op.getOperand(j));
else
Operands[j] = Op.getOperand(j);
}
Op = DAG.getNode(Op.getOpcode(), dl, NVT, &Operands[0], Operands.size());
return DAG.getNode(ISD::BITCAST, dl, VT, Op);
}
The input Op is <4 x i8> = and <4 x i8>, <4 x i8>.
The result of TLI.getTypeToPromoteTo(ISD::AND, MVT::v4i8) is MVT::v2i32;
The reason why this occurs is:
// See if this has an explicit type specified.
std::map<std::pair<unsigned, MVT::SimpleValueType>,
MVT::SimpleValueType>::const_iterator PTTI
PromoteToType.find(std::make_pair(Op, VT.getSimpleVT().SimpleTy));
if (PTTI != PromoteToType.end()) return PTTI->second;
assert((VT.isInteger() || VT.isFloatingPoint()) &&
"Cannot autopromote this type, add it with
AddPromotedToType.");
EVT NVT = VT;
do {
NVT = (MVT::SimpleValueType)(NVT.getSimpleVT().SimpleTy+1);
assert(NVT.isInteger() == VT.isInteger() && NVT != MVT::isVoid
&&
"Didn't find type to promote to!");
} while (!isTypeLegal(NVT) ||
getOperationAction(Op, NVT) == Promote);
The first line in the do while loop is important, it just increments the type,
starting at MVT::v4i8 until it hits a legal type.
This seems broken to me.
Here is what TOT LLVM has for its MVT list:
v4i8 = 14, // 4 x i8
v8i8 = 15, // 8 x i8
v16i8 = 16, // 16 x i8
v32i8 = 17, // 32 x i8
v2i16 = 18, // 2 x i16
v4i16 = 19, // 4 x i16
v8i16 = 20, // 8 x i16
v16i16 = 21, // 16 x i16
v2i32 = 22, // 2 x i32
So, for my platform with the 'and' I promote all i8 and i16 types, so
the first type that is legal is v2i32.
If I add the v1i32 then it works, however, it breaks when I added v1i16(which I
need for the v2i8 case).
So I set AddPromotedType(ISD::AND, MVT::v4i8, MVT::v1i32) to get around it. So
it seems in this case someone has
hit this issue before and added the ability to override promotion rules.
> -----Original Message-----
> From: Rotem, Nadav [mailto:nadav.rotem at intel.com]
> Sent: Monday, July 30, 2012 11:17 AM
> To: Villmow, Micah; Developers Mailing List
> Subject: RE: Vector promotion broken for <2 x [i8|i16]>
>
> I don't know how your target architecture looks like, but I suspect
> that <4 x i8> should not be legalized to <1 x i32>. I think
that what
> you are seeing is that <4 x i8> is first split into <2 x i8>,
and later
> promoted to <2 x i32>. At the moment different targets can only
affect
> type-legalization by declaring different legal types. A number of us
> discussed the possibility of allowing different targets to override the
> decisions for different types. But at the moment this is only a plan.
>
> -----Original Message-----
> From: Villmow, Micah [mailto:Micah.Villmow at amd.com]
> Sent: Monday, July 30, 2012 21:05
> To: Rotem, Nadav; Developers Mailing List
> Subject: RE: Vector promotion broken for <2 x [i8|i16]>
>
> Sorry, <4 x i8> should convert to a <1 x i32>. What currently
is
> happening is that it is returning a <2 x i32> because <1 x i32>
does
> not exist.
>
> Micah
>
> > -----Original Message-----
> > From: Rotem, Nadav [mailto:nadav.rotem at intel.com]
> > Sent: Monday, July 30, 2012 10:51 AM
> > To: Villmow, Micah; Developers Mailing List
> > Subject: RE: Vector promotion broken for <2 x [i8|i16]>
> >
> >
> > >Though I am having trouble in understanding how x86 supports the
<1
> > >x
> > i64> type. Based on looking at the code, it should fail because
v1i64
> > is not supported on the x86 platform as >far as I can tell.
> >
> > The Type-Legalizer can handle vector types in the following ways:
> > 1. Split - this splits vectors into two halves. For example on SSE4,
> > <4 x i64> is split to <2 x i64>
> > 2. Widen - this methods adds additional vector elements, but keeps
> the
> > element type. For example <3 x float> is legalized to <4 x
float> 3.
> > Promote - this method widens each element in the vector. For example
> > SSE masks are promoted from <4 x i1> to <4 x i32> 4.
Scalarize - this
> > method coverts vectors with a single element into a scalar. For
> > example, <1 x i64> into i64.
> >
> > >> The function getTypeToPromoteTo will return a <2 x i32>
for a <2 x
> > i8>, <2 x i16> or <4 x i8>.
> >
> > The first two conversions look correct, and I assume that your target
> > declares v2i32 as a legal type. I am not sure how <4 x i8> got
there.
> > Maybe it was first split, and after that promoted ?
> >
> >
> >
> > From: Rotem, Nadav [mailto:nadav.rotem at intel.com]
> > Sent: Saturday, July 28, 2012 12:56 PM
> > To: Villmow, Micah; Developers Mailing List
> > Subject: RE: Vector promotion broken for <2 x [i8|i16]>
> >
> > I think that you attached the wrong patch. The attached patch is the
> > one which adds the new MVT types.
> >
> >
> >
> > From: llvmdev-bounces at cs.uiuc.edu [mailto:llvmdev-
> bounces at cs.uiuc.edu]
> > On Behalf Of Villmow, Micah
> > Sent: Saturday, July 28, 2012 01:54
> > To: Developers Mailing List
> > Subject: [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
> >
> > Vector promotion which is new in LLVM 3.1 is broken for sub32 bit
> > types. The problem is in the VectorLegalizer::PromoteVectorOp.
> > The function getTypeToPromoteTo will return a <2 x i32> for a
<2 x
> > i8>,
> > <2 x i16> or <4 x i8>. The problem is that there are no
vectors of
> > size
> > 1 defined for i32 or i16. The attached patch fixes these issues.
> >
> > This can be reproduced by setting in any target:
> > setOperationAction(ISD::AND, MVT::i8, Promote);
> > setOperationAction(ISD::AND, MVT::v2i8, Promote);
> > setOperationAction(ISD::AND, MVT::i16, Promote);
> >
> > Let me know if this is good,
> > Micah
> >
> > ---------------------------------------------------------------------
> > Intel Israel (74) Limited
> >
> > This e-mail and any attachments may contain confidential material for
> > the sole use of the intended recipient(s). Any review or distribution
> > by others is strictly prohibited. If you are not the intended
> > recipient, please contact the sender and delete all copies.
> > ---------------------------------------------------------------------
> > Intel Israel (74) Limited
> >
> > This e-mail and any attachments may contain confidential material for
> > the sole use of the intended recipient(s). Any review or distribution
> > by others is strictly prohibited. If you are not the intended
> > recipient, please contact the sender and delete all copies.
>
> ---------------------------------------------------------------------
> Intel Israel (74) Limited
>
> This e-mail and any attachments may contain confidential material for
> the sole use of the intended recipient(s). Any review or distribution
> by others is strictly prohibited. If you are not the intended
> recipient, please contact the sender and delete all copies.
dag at cray.com
2012-Jul-30 20:14 UTC
[LLVMdev] Vector promotion broken for <2 x [i8|i16]>
"Villmow, Micah" <Micah.Villmow at amd.com> writes:> Sorry, <4 x i8> should convert to a <1 x i32>.Why? I'm really confused. Shouldn't this converts to a <4 x i32>? -Dave
The comments in the code state it should do bitcast, op, then bitcast, not
extend, op and truncate.
"SDValue VectorLegalizer::PromoteVectorOp(SDValue Op) {
// Vector "promotion" is basically just bitcasting and doing the
operation
// in a different type. For example, x86 promotes ISD::AND on v2i32 to
// v1i64."
So following the same logic <4 x i8> bitcasts into a <1 x i32> and
then does the ISD::AND and then bitcasts back to <1 x i32>.
Micah
> -----Original Message-----
> From: dag at cray.com [mailto:dag at cray.com]
> Sent: Monday, July 30, 2012 1:15 PM
> To: Villmow, Micah
> Cc: Rotem, Nadav; Developers Mailing List
> Subject: Re: [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
>
> "Villmow, Micah" <Micah.Villmow at amd.com> writes:
>
> > Sorry, <4 x i8> should convert to a <1 x i32>.
>
> Why? I'm really confused.
>
> Shouldn't this converts to a <4 x i32>?
>
> -Dave
Seemingly Similar Threads
- [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
- [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
- [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
- [LLVMdev] Vector promotion broken for <2 x [i8|i16]>
- [LLVMdev] Vector promotion broken for <2 x [i8|i16]>