Damon Estep
2007-Jan-16 15:45 UTC
[asterisk-users] Polycom IP601 - some hints working, not others?
Are all of the sip phones in the same context?> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Robert Jenkins > Sent: Tuesday, January 16, 2007 1:44 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: [asterisk-users] Polycom IP601 - some hints working, notothers?> > Hi, > I've got an Asterisk setup including a TDM2400 for analog trunks & > extensions plus two IP501s & an IP601 (all firmware 1.6.7 assupplied).> > The initial buddy / hint setup was fairly straightforward, but I havea> strange problem in that some extensions don't show any statusindication.> > Asterisk (V 1.2.13) CLI report for 'show hints' seems to indicate thatthe> hints are set up correctly, but the phones are just not attempting to > monitor certain extensions:- > > -= Registered Asterisk Dial Plan Hints =- > 304 : ZAP/4 State:Idle > Watchers 0 > 303 : ZAP/3 State:Idle > Watchers 0 > 302 : ZAP/2 State:Idle > Watchers 0 > 301 : ZAP/1 State:Idle > Watchers 0 > 210 : ZAP/16 State:Idle > Watchers 0 > 209 : ZAP/15 State:Idle > Watchers 0 > 208 : ZAP/14 State:Idle > Watchers 3 > 207 : ZAP/13 State:Idle > Watchers 3 > 206 : ZAP/12 State:Idle > Watchers 3 > 205 : ZAP/11 State:Idle > Watchers 0 > 204 : ZAP/10 State:Idle > Watchers 3 > 203 : ZAP/9 State:Idle > Watchers 0 > 202 : SIP/202 State:Idle > Watchers 3 > 201 : SIP/201 State:Idle > Watchers 3 > 200 : SIP/200 State:Idle > Watchers 3 > ---------------- > > The (mac)-directory.xml files have all the extensions in, in identical > format, but the phones simply don't seem to be subscribing to certain > 'buddys' to show the status. > > I've tried deleting directory entries at both an IP501 and the IP601and> re-creating them, with & without rebooting, but with no effect. > All entries have buddy watch enabled. > The list of working / not working indications is consistent acrossreboots> of both the phones and the Asterisk PC. > > Any ideas appreciated, > > Robert Jenkins. > > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-users mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-users
Robert Jenkins
2007-Jan-16 16:43 UTC
[asterisk-users] Polycom IP601 - some hints working, not others?
Hi, Yes, there are just the three Polycoms (200 - 202), the rest of the system is analog. The Polycoms always 'see' each other, the problem is with them seeing some Zap channels. Although the 501s don't have the display of the 601 plus sidecar, from Asterisks point of view the 'watchers' count is always 3 or 0, so all the Polycom phones appear to be behaving identically, all or none show status, in respect of each contact. (In the 'Show Hints' list, the lines with 'Watchers 0' are the extensions that don't show status). Robert Jenkins.> -----Original Message----- > From: Damon Estep [mailto:damon@suburbanbroadband.net] > Sent: 16 January 2007 22:46 > To: raj@jrw.co.uk; Asterisk Users Mailing List - > Non-Commercial Discussion > Subject: RE: [asterisk-users] Polycom IP601 - some hints > working, not others? > > Are all of the sip phones in the same context? > > > -----Original Message----- > > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users- > > bounces@lists.digium.com] On Behalf Of Robert Jenkins > > Sent: Tuesday, January 16, 2007 1:44 PM > > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > > Subject: [asterisk-users] Polycom IP601 - some hints working, not > others? > > > > Hi, > > I've got an Asterisk setup including a TDM2400 for analog trunks & > > extensions plus two IP501s & an IP601 (all firmware 1.6.7 as > supplied). > > > > The initial buddy / hint setup was fairly straightforward, > but I have > a > > strange problem in that some extensions don't show any status > indication. > > > > Asterisk (V 1.2.13) CLI report for 'show hints' seems to > indicate that > the > > hints are set up correctly, but the phones are just not > attempting to > > monitor certain extensions:- > > > > -= Registered Asterisk Dial Plan Hints =- > > 304 : ZAP/4 State:Idle Watchers 0 > > 303 : ZAP/3 State:Idle Watchers 0 > > 302 : ZAP/2 State:Idle Watchers 0 > > 301 : ZAP/1 State:Idle Watchers 0 > > 210 : ZAP/16 State:Idle Watchers 0 > > 209 : ZAP/15 State:Idle Watchers 0 > > 208 : ZAP/14 State:Idle Watchers 3 > > 207 : ZAP/13 State:Idle Watchers 3 > > 206 : ZAP/12 State:Idle Watchers 3 > > 205 : ZAP/11 State:Idle Watchers 0 > > 204 : ZAP/10 State:Idle Watchers 3 > > 203 : ZAP/9 State:Idle Watchers 0 > > 202 : SIP/202 State:Idle Watchers 3 > > 201 : SIP/201 State:Idle Watchers 3 > > 200 : SIP/200 State:Idle Watchers 3 > > ---------------- > > > > The (mac)-directory.xml files have all the extensions in, > in identical > > format, but the phones simply don't seem to be subscribing > to certain > > 'buddys' to show the status. > > > > I've tried deleting directory entries at both an IP501 and the IP601 > and > > re-creating them, with & without rebooting, but with no effect. > > All entries have buddy watch enabled. > > The list of working / not working indications is consistent across > reboots > > of both the phones and the Asterisk PC. > > > > Any ideas appreciated, > > > > Robert Jenkins. > > > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users >
Damon Estep
2007-Jan-16 17:02 UTC
[asterisk-users] Polycom IP601 - some hints working, not others?
You are trying to subscribe to a non SIP channel? Not sure that can be done...never tried. -----Original Message----- From: Robert Jenkins [mailto:raj@jrw.co.uk] Sent: Tuesday, January 16, 2007 4:43 PM To: Damon Estep; 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [asterisk-users] Polycom IP601 - some hints working, not others? Hi, Yes, there are just the three Polycoms (200 - 202), the rest of the system is analog. The Polycoms always 'see' each other, the problem is with them seeing some Zap channels. Although the 501s don't have the display of the 601 plus sidecar, from Asterisks point of view the 'watchers' count is always 3 or 0, so all the Polycom phones appear to be behaving identically, all or none show status, in respect of each contact. (In the 'Show Hints' list, the lines with 'Watchers 0' are the extensions that don't show status). Robert Jenkins.> -----Original Message----- > From: Damon Estep [mailto:damon@suburbanbroadband.net] > Sent: 16 January 2007 22:46 > To: raj@jrw.co.uk; Asterisk Users Mailing List - > Non-Commercial Discussion > Subject: RE: [asterisk-users] Polycom IP601 - some hints > working, not others? > > Are all of the sip phones in the same context? > > > -----Original Message----- > > From: asterisk-users-bounces@lists.digium.com > [mailto:asterisk-users- > > bounces@lists.digium.com] On Behalf Of Robert Jenkins > > Sent: Tuesday, January 16, 2007 1:44 PM > > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > > Subject: [asterisk-users] Polycom IP601 - some hints working, not > others? > > > > Hi, > > I've got an Asterisk setup including a TDM2400 for analog trunks & > > extensions plus two IP501s & an IP601 (all firmware 1.6.7 as > supplied). > > > > The initial buddy / hint setup was fairly straightforward, > but I have > a > > strange problem in that some extensions don't show any status > indication. > > > > Asterisk (V 1.2.13) CLI report for 'show hints' seems to > indicate that > the > > hints are set up correctly, but the phones are just not > attempting to > > monitor certain extensions:- > > > > -= Registered Asterisk Dial Plan Hints =- > > 304 : ZAP/4 State:Idle Watchers 0 > > 303 : ZAP/3 State:Idle Watchers 0 > > 302 : ZAP/2 State:Idle Watchers 0 > > 301 : ZAP/1 State:Idle Watchers 0 > > 210 : ZAP/16 State:Idle Watchers 0 > > 209 : ZAP/15 State:Idle Watchers 0 > > 208 : ZAP/14 State:Idle Watchers 3 > > 207 : ZAP/13 State:Idle Watchers 3 > > 206 : ZAP/12 State:Idle Watchers 3 > > 205 : ZAP/11 State:Idle Watchers 0 > > 204 : ZAP/10 State:Idle Watchers 3 > > 203 : ZAP/9 State:Idle Watchers 0 > > 202 : SIP/202 State:Idle Watchers 3 > > 201 : SIP/201 State:Idle Watchers 3 > > 200 : SIP/200 State:Idle Watchers 3 > > ---------------- > > > > The (mac)-directory.xml files have all the extensions in, > in identical > > format, but the phones simply don't seem to be subscribing > to certain > > 'buddys' to show the status. > > > > I've tried deleting directory entries at both an IP501 and the IP601 > and > > re-creating them, with & without rebooting, but with no effect. > > All entries have buddy watch enabled. > > The list of working / not working indications is consistent across > reboots > > of both the phones and the Asterisk PC. > > > > Any ideas appreciated, > > > > Robert Jenkins. > > > > > > _______________________________________________ > > --Bandwidth and Colocation provided by Easynews.com -- > > > > asterisk-users mailing list > > To UNSUBSCRIBE or update options visit: > > http://lists.digium.com/mailman/listinfo/asterisk-users >
Seemingly Similar Threads
- force ulaw passthrough if call from modem extension?
- # IP601's with POE per Catalyst 3560G-48PS
- Configuring BLF or Asterisk presence/Hints feature
- Polycom IP 601 Buddy Watch doesn't work after Asterisk reload
- Newbie Polycom: IP601 console with expansion module