search for: ip601

...e----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Robert Jenkins > Sent: Tuesday, January 16, 2007 1:44 PM > To: 'Asterisk Users Mailing List - Non-Commercial Discussion' > Subject: [asterisk-users] Polycom IP601 - some hints working, not others? > > Hi, > I've got an Asterisk setup including a TDM2400 for analog trunks & > extensions plus two IP501s & an IP601 (all firmware 1.6.7 as supplied). > > The initial buddy / hint setup was fairly straightforward, but I have a > s...

Hello people, I am having difficulties figuring out the POE power draw in watts from a Polycom IP601. I want to know how many IP601's can be powered from the Cisco Catalyst 3560G-48PS. The IP601 wallwart has: Input 120VAC 60hz 19W, Output 24VDC 500mA. I assume the output is appropriate value to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE c...

...ather than what's in the Via: header. > -----Original Message----- > From: Warren (mailing lists) [mailto:warren-lists@icruise.com] > Sent: Friday, October 27, 2006 5:45 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: [asterisk-users] Taking a Polycom IP601 home > > > I am taking a Polycom IP601 home to try to figure out how to > provision > it outside of the office for our outsides sales people. > > Our asterisk server has a direct outside IP. > The IP601 will be behind a router at home so it will not have > an outsid...

I was reading a Polycom brochure and it appears that there is really no special receptionist console and the console is basically a IP601. Is this correct? The only difference is to purchase an expansion module in order to have more shortcut keys for the girls. So, apart from the hardware, as far as the dialplan is concerned, do I just treat the receptionist console as any other extension? Are there any special precautions I need t...

One more Polycom IP601 question please (sorry for the long intro here to document) ... In order to closely approximate the behavior of the previous telephone system that many of the users are familiar with, I have set up call parking like this: - features.conf [general] section contains: parkext => **...

Hi, Returning to my office I find two "missed calls" (from autodialers) that my IP601 displays as originating from 01111111111. However the CDR database recorded the call this way: calldate: 2008-04-04 14:18:16+02 clid: 0172752780 src: 0172752780 dst: 2131 dcontext: default channel: Zap/1-1 dstchannel: SIP/0146472131-007a7e80 lastapp:...

Hi everyone, I have a user that needs a little extra volume on his Polycom IP 601 phone set for all calls (beyond what the volume control currently offers). Is there a provisioning setting for this anywhere? (I'd like to avoid a separate amplifier between the phone and handset if possible.) Alternatively, is there a way to have Asterisk 1.4.x boost the volume to a particular SIP device

Hi Polycom experts, I'm having a problem getting changes to the Polycom IP 601's (mac)-directory.xml file to update the button list on the phone. If the phone is newly provisioned (i.e. if I "Format File System" on the phone) then the new list will show up on the buttons, but of course this is pretty drastic way to do it. - Environment: Asterisk test setup with 7 phones,

Hey list, Im in this HUGE crisis. Im trying to get a Polycom 601 with two expansion modules to work. I need the XML config files I guess. Does anyone have these I can have? Im trying to get this phone up and running, and haveing MUCHO problems, can someone help me out!! Im sure if I see the configs I can see how it works, just need those XML files!! The ones from the 501 that I have dont seem to

Hey everyone, I haven't seen an issue quite like mine, so I am hoping anyone who used the Polycom 601's may have an idea. We are going to be switching our office over to Asterisk. All the phones are going to be 601's, I am going to set up a boot server, but for now I am just going to test everything on one phone. My question is I have the phone registered in Asterisk (phone icon

All, Slightly off topic. Polycom released their SIP software version 1.6.6 for their phones recently. I was under the impression that this release fixed a previous limitation where the phones would only watch 7 buddies, ie send 7 sip subscriptions to Asterisk. I have configured a phone directory to watch 30 or so appearances, and it still seems to only be sending 7 subscriptions to Asterisk.

I'm having a problem with polycom ip601. If I Dial() directly eg Dial(SIP/4000) it works perfectly. The polycom rings, and stops ringing as soon as I hang up. But if the phone is called via a queue, the polycom continues to ring long after I've hung up. Other phones in the queue (grandstream, cisco) don't have this problem,...

How do you disable call waiting on Polycom IP601 phones? I've looked through the user and admin guides and can't see anything about disabling it. -Dan

Calling all Polycom gurus: I am using Polycom IP601 phones with Asterisk 1.4.21.2 In all Polycom phones, I set the following in sip.cfg. <dialplan dialplan.impossibleMatchHandling="2"> </dialplan> (I leave the digitmap unchanged because I thought setting impossibleMatchHandling will ignore the bitmap) ...so that I could...

Hi, I have an Asterisk 1.8.2.3 installed (public IP) with a peer (Polycom IP601) installed behind NAT. When the peer makes a call, it's working without any problem. But when a call is coming back, it ends up with a Got SIP response 400 "Bad Request" back from xx.xx.xx.xx where the xx.xx.xx.xx is the public IP of the peer. And the call drops to the voicemail (...

I have Teliax trunk set to ulaw and g729 and I have a modem/fax extension from a sipura forced to ulaw. When the call goes out through Teliax IAX trunk, asterisk transcodes to g729. Is there a way to tell asterisk not to transcode calls from/to a specific extension? I'm running asterisk 1.2.4 and that extension is for my home alarm/dish network and fax calls. Thanks -------------- next part

What hardphones support xml/html/xhmtl/microbrowser? I need an inexpensive SIP hardphone that can run simple applications (queue status, etc). The phones I know of: Aastra 480i, 9112i, 9133i (though limited by 3 LCD lines on the 91xx seems kind of silly) Cisco 79xx Mitel 5235 Polycom IP601 Any others? -Dan

Hello all Asterisk 1.2.10 BRIstuff PRE-1s Debian sarge I have an issue with my ISDN-BRI line. Asterisk tells me my D-Channel is down, no matter is I have an actual line plugged in or not. == Primary D-Channel on span 1 down I somehow got it to work once! The config tools do not indicate any errors whatsoever. Here is a rundown of various listings I can think about. (some things may show

I am working on Polycom IP601 console with expansion module. I want to put on the BLF (busy lamp field) feature on all the contact/speed dial names I put on the console but I could not get it to work. *CLI> core show version Asterisk 1.4.13 built by root @ hostname on a i686 running Linux on 2007-11-20 05:26:15 UTC *CLI&gt...

Where's the setting for overlap dialing with Polycom IP601? -Dan