search for: tdm2400

We have a recently deployed server with a new TDM2400 card that will not put dialtone or audio on FXS ports after the physical server restarts (though they will ring if called, there's just no audio on the line if the phone at the other end picks up). The symptom can be resolved by stopping Asterisk, restarting DAHDI, and then restarting Asterisk...

Hi List... I have an asterisk box with one TDM2400, it has 8 FXS's and 12 FXO's, and it also has the echo canceller... I'm running Asterisk 1.2.13 and Zaptel 1.2.12 with the Kernel 2.6.9-34.0.2.EL I'm using Polycom's 501 with the SIP 1.6.2.0041 The problem is when someone dials to or from the PSTN through the TDM2400, the v...

Hi, I'm trying to connect an HDL F10 device for a friend living in Brazil to the TDM2400 on his Asterisk server. That device should behave like a normal doorbell and it is if connected to an analog PBX. I connected to the TDM2400 and everything works fine except for one thing: when the called party hangs up his phone, the F10 HDL device does not hang up. I'm not brazilian and no...

Does anyone know if a TDM2400 will fit into a Dell 2850? Kerry Garrison Director of Technical Services Tech Data Pros - Orange County's Mobile IT Service Provider (949) 502-7819 x200 - <mailto:kerryg@techdatapros.com> kerryg@techdatapros.com <http://www.techdatapros.com/> http://www.techdatapros.com ----...

Good Day List, I'm having some issues with echo cancel on my Asterisk box, and have done extensive reading and have gained some useful pointers from this list but have a couple of hopefully fairly simple questions. The Asterisk box is connected via 20 FXO ports on a TDM2400 with the Hardware echo cancel module. Echo cancel almost works, but the users hear what they describe as a 'crackle' coming back when they talk. I want to tune to echo canceller, but am unsure if any of the options provided have any effect on the hardware module. Do the settings such...

Hi, >From a chat with Kevin Fleming during last Astricon Europe in Paris, I understood that Digium was about to support TDM bridging with TDM2400 board. This feature had to be introduced with 1.4 release. Is my understanding correct ? If correct, would it be reliable enough to bridge 14400b/s fax calls though I know, fax were not officially supported or shall I use Sangoma boards for that ? Regards -------------- next part --------------...

does TDM2400 work on 3.3v pci slot? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20070211/ac7d0c79/attachment.htm

Hello list, I am encountering a bit of a problem in working with incoming calls with a TDM2400 and * 1.2.4; when a call comes in, * will correctly detect the ringing, but will sometimes report multiple "Attempting native bridge". What I do is basically that when a call comes in, I dial a different box through the same Zaptel interface and I get logs like this: [call comes in...

Hello, I've installed two Digium TDM2400 cards on my server. One has 24FXS and the other has 16 FXS and 4 FXO. They are both connected to power. Unfortunately some of the FXS module fail to initialize and I find following messages in the logs (the rest of the FXS modules work well). Could someone give me some advice? !!!!!!! LOOP_CLO...

Hello All I have a TDM2400 card with 4 FXO, and the the following problem: This card answered all the calls, but for the caller, the call is ringing and I don't hear nothing when it has picked up. Here is piece of my log: Thanks for any help. == Starting post polarity CID detection on channel 21 -- Starting simp...

Hello Fellows! I have a TDM2400 and I can't put it to work. Every time it receive a call the Asterisk handle it and call the SIP phone; when people pick up the fone they don't hear nothing and the caller hear the phone rings and nothing happens. In Asterisk console I can see the message answered by the SIP's phone. I...

Hi Adam, I have the same problem. Are you sure is an echo canceller problem? Following advices from this list I discovered that I had an IRQ shared. Untill now I didn't try the new setup but I really hope that this was the problem. If you manage to solve the problem in any way please give me advise. Ciao You can make sure the card is sitting on

...gured and is working with other tdm cards. - zaptel.conf is configured. Zapata Telephony Interface Registered on major 196 Zaptel Version: SVN-branch-1.2-r2128M Zaptel Echo Canceller: KB1 ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 74 PCI Config reg is 02900317 Wildcard TDM2400P: New Reg: fe590000! Detected REG0: 00000100 Detected REG1: 00007849 Detected REG2: 0000001d (pre) Reg fc is 10000027 (post) Reg fc is 10000024 Detected REG2: 0000ffff wctdm24xxp: reg is a04c0004 Resetting the modules... During Resetting the modules...

Hello everyone, I have noticed thar our dahdi-channels.conf has some repeating directives, for instance for channel 2 (FXO) we have these settings: ;;; line="2 WCTDM/0/1 FXSKS" signalling=fxs_ks callerid=asreceived group=0 context=from-pstn channel => 2 callerid= group= context=default As you can see, a few directives are repeated (callerid, group, context). This was generated by

...or interrupt problems etc I have seen some posts recently that seem to indicate it is in fact possible these days thanks to some updated firmware perhaps? ..... I just need to have two in the server because the 4 ports aren't enough ... I'd rather just expand by one card rather than get a TDM2400 (or TDM800??) Anyone had recent success/failure with this sort of thing? -- Chris Earle

I have one TDM2404E digium card on asterisk box, after configuring the zaptel and zapata configuration files, I am getting these errors when reloading asterisk: ast_unregister_indication_country: Removed default indication country 'us' setup_zap: Ignoring signalling setup_zap: Ignoring answeronpolarityswitch unable to recognize channel 13-5 what is the reason for that? Thanks,

Hi all, I have a TDM2400 full of FXS cards and a TDM800 full of FXO cards. If I have a fax machine on the FXS port dialing out through asterisk on the TDM800 FXO, should I be expecting any problems? Or should this just work as expected? (ie, flawlessly with the asterisk box essentially transparent to the whole operation)...

Is there a way I can change the ring cadence on FXS lines on a system using a Digium Wildcard TDM2400 card? I recently deployed a new phone system, and the customer has a few POTS phones in areas where they don't have data network services, so we're using the FXS lines to provide dialtone at those outbuildings. The old phone system would ring those phones with a short ring-short ring-paus...

Hi, We added more g729 licenses today that we bought from digium on Friday. Since we had previously installed their licenses and had them running we just ran the register command along with the new key that was given to us. After we restarted asterisk NONE of the g729's worked even though if we do a show g729 it shows the new correct total licenses. In the licenses folder we see both license

...ng, and has Sketchy Power, LAN - NEW Cabling in main Office building, Hodge Podge of DYI wiring across remaining buildings. Phones - Total of about 50 extensions. Only about 25 - 30 phones will be IP phones, 20-30 more will have to be analog due to the distance. Analog Extensions will be on Digium TDM2400 or Sangoma A400 Cards. Analog extensions WILL Hit a Surge Gate before the cards, and as much precaution on grounding protection and power protection is being taken as possible. The cards WILL BE PCI not PCI-e (They are being donated) A New Dell Power-edge Server will be acquired for the PBX HERE...