You don't have a T1 connected to the card or you are using a wrong cable
or... A red alarm says 'I don't like the signal coming in from the far
end'.
Could be no signal, could be incompatible signaling options, could be wiring
issues, could be most anything.
Lyle
----- Original Message -----
From: Murali
To: asterisk-users@lists.digium.com ; asterisk-users-request@lists.digium.com
Sent: Monday, September 13, 2004 5:40 AM
Subject: [Asterisk-Users] Red Alarm - Config Zaptel card
hi all,
can anyone give solution for this.
wct1xxp - Digium Wildcard T100P T1/PRI Card 0
zttool gives
RED Digium Wildcard T100P T1/PRI Card 0
my zaptel.conf look like this
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us
the above 5 lines only placed in my zaptel.conf file
Regards
Murali
------------------------------------------------------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/7d6050db/attachment.htm