asterisk users - Jul 2004 - TA750 + T100P configuration. flashing red alarm on t100p after running modprobe wct1xxp, ztcfg

(to mods: sorry for any extra work I've put you through. Posting from my 
work account, as proper)

Hello all, I'm back. I've got that lucky feeling that this will all
work out very soon, and I hope that that is true.

The issue:
In my * server I have a t100P, connected with a T1 crossover cable to
an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg'
the alarm on the card starts blinking red. running zttool confirmed
that yes, it is a red alarm. I've read a few previous posts on this
type of setup and I'm not too much closer. What should I be checking
next? A different cable? The config on the TA750? Any help or tips are
always appreciated.

Configs:
[root@rosella root]# cat /etc/zaptel.conf
span=1,0,0,esf,b8zs
fxoks=1-8
loadzone = us
defaultzone=us
[root@rosella root]# cat /etc/zaptel.conf
span=1,0,0,esf,b8zs
fxoks=1-8
loadzone = us
defaultzone=us
[root@rosella root]# lsmod
Module                  Size  Used by    Not tainted
wct1xxp                13760   0
zaptel                181984   0  [wct1xxp]
autofs                 13780   0  (autoclean) (unused)
tg3                    57608   2
... (etc) ...

Other information:
I used the pinout available here:
http://www.digium.com/index.php?menu=faq#General_5 
<http://www.digium.com/index.php?menu=faq#General_5>

Output from /var/log/messages:
Jul  2 11:30:23 rosella sshd(pam_unix)[2601]: session opened for user
root by (uid=0)
Jul  2 11:30:51 rosella kernel: Zapata Telephony Interface Registered
on major 196
Jul  2 11:30:51 rosella kernel: Framer: DS21552, Revision: 3 (T1)
Jul  2 11:30:51 rosella kernel: Found a Wildcard: Digium Wildcard T100P 
T1/PRI
Jul  2 11:31:14 rosella kernel: Registered tone zone 0 (United States
/ North America)
Jul  2 11:31:14 rosella kernel: Using ESF/B8ZS coding/framing
Jul  2 11:31:14 rosella kernel: Calling startup (flags is 4099)

Output from /sbin/ztcfg -vv:
[root@rosella root]# /sbin/ztcfg -vv

Zaptel Configuration
=====================
SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
... (etc) ...
Channel 08: FXO Kewlstart (Default) (Slaves: 08)

8 channels configured.

[root@rosella root]#

Help!

-paul

-- 
Paul Concepcion
HelpCan Computer Technical Services, Inc.