search for: wct1xxp

Hi, I am trying to set up * and ISDN-PRI (channels 1 - 15) using E100 boards. I installed zaptel and libpri. When I execute modprobe -r wct1xxp I get an error message: ZT_CHANCONFIG failed on channel 1: Function not implemented (38) /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed Follows my /etc/zaptel.conf: span=1,0,0,ccs,hdb3 nethdlc=1-15 loadzone = us...

...d) that Asterisk will successfully load on the other side (automatically). I've used the provided asterisk startup script (which I moved to /etc/rc.d/init.d) and RedHat's 'chkconfig' to make sure that Asterisk is started on bootup, but the problem I'm having has to do w/ the wct1xxp module, I believe. When I want to start Asterisk manually, I just type 'modprobe wct1xxp' and my two T1 cards are correctly started and then I can start asterisk w/ the normal commands and everything works. But, when I come back from a restart, it appears that the Asterisk startup fai...

Does anyone keep a known telemarketer caller id database? If not has anyone proposed an Asterisk community project to share this information? Sort of a nation wide blacklist so Asterisk'ers can cut down on the garbage calls... -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, all I am trying to install E100P card, the 'modprobe zaptel' is ok, but when I did 'modprobe wct1xxp', I got such error, so can not load the driver for the card. /lib/modules/2.4.20-8/misc/wct1xxp.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the output f...

...I get a couple of errors on modprobing the driver, but if I reverse the order it seems to load OK. ztcfg is happy and zttool seems to see the card so I'm pretty certain it is something silly. any help gratefully received. Brian [root@pigsy root]# modprobe zaptel [root@pigsy root]# modprobe wct1xxp ZT_CHANCONFIG failed on channel 32: No such device or address (6) /lib/modules/2.4.20-24.9/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.20-24.9/misc/wct1xxp.o: insmod wct1xxp failed [root@pigsy root]# modprobe wcfxs [root@pigsy root]# modprobe wct1xxp [root@pigsy root]# __________...

Hi All, I wish to connect * to a Cisco using a E100P board. When I load the driver I got this error message: -bash-2.05b# modprobe wct1xxp ZT_CHANCONFIG failed on channel 1: Function not implemented (38) /lib/modules/2.4.21-SAX/misc/wct1xxp.o: post-install wct1xxp failed /lib/modules/2.4.21-SAX/misc/wct1xxp.o: insmod wct1xxp failed Follows Cisco configuration: isdn switch-type primary-qsig isdn voice-call-failure 0 controller E1...

...om my work account, as proper) Hello all, I'm back. I've got that lucky feeling that this will all work out very soon, and I hope that that is true. The issue: In my * server I have a t100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The config on the TA750? Any help or tips are alwa...

In my * server I have a T100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. Running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The config on the TA750? The TA750 has been re...

...t was impossible we were getting that many errors and something must have been wrong with our handling of the E-bit signal. I've come across the DS21554 framer documentation and i've seen that it has a flag for enabling the E-bit generation in the "TCR2" register and that the wct1xxp.c wasn't setting it. So i tried this small patch and the telco is perfectly happy with it, now, the E-bit error has disappeared. Since there had been a thread in May (started by Konrad Gorsky) about weird far end CRC errors i'm posting in the hope to help somebody. Note that i do not...

...video, Ethernet, and serial ata all on-board, I got it because of that, there wouldn't be anything else on the pci bus that would mess with the zaptel card(s). So, here's my problem. I'm running redhat 9 with kernel 2.4.20-20.9. I can load the zaptel module fine. I can also load the wct1xxp module fine. But, after I load the wct1xxp module, I notice that the entire box just freezes for about 3 seconds every 30 seconds. Zttool sees the card fine, doesn't see any problems (other than the circuit down), and there are no irq misses. Within 3 seconds of starting *, the entire box jus...

Hello ml, i need some help on my zaptel configuration. My E100P only shows some YELLOW / RED alarm when I load the wct1xxp module and do a cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED ... .. . My /etc/zaptel.conf is: span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=nl defaultzone=nl I tried zaptel-1.0RC2 and the latest CVS version too. So I think it...

I have a PolyCom Soundpoint 500 sip phone. I'm tring to get the phone registered on an asterisk box but am having no luck. I get the following errors 192.168.22.196 being the phone and 22.254 being the asterisk box.. Apr 23 11:41:33 NOTICE[1133742896]: chan_sip.c:5623 handle_request: Registration from '"110" <sip:192.168.22.196@192.168.22.254>' failed for

...itten on it, and the card is a bit different than the T100P I already have, Does Digium use the same boards for both cards ? I don't have an E1 link here, can I test the card just by loading the driver and run zttool to see how many channels it shows ? I don't find a wce1xxp driver only wct1xxp...

...anyone?), so that's what I've put here. These are based on zaptel-1.0-RC1. John --- zaptel-1.0/zaptel.init.ole 2003-07-14 14:25:44.000000000 -0500 +++ zaptel-1.0/zaptel.init 2004-08-18 16:43:04.000000000 -0500 @@ -27,9 +27,10 @@ RETVAL=0 -MODULES="torisa tor2 wct4xxp wct1xxp wcfxo wcfxs wcusb" - -RMODULES="wcusb wcfxs wcfxo wct1xxp wct4xxp tor2 torisa" if [ "${DEBUG}" = "yes" ]; then ARGS="debug=1" --- zaptel-1.0/zaptel.sysconfig.ole 2002-06-06 18:20:24.000000000 -0500 +++ zaptel-1.0/zaptel.sysconfig 2004-08-1...

hi all i have a te110p installed in my system with a lot of Echo.. i decide to install the oslec echo supressor but when y try to add the module i have this problem. [root at asterisk zaptel-1.4.7.1]# insmod wct1xxp.ko insmod: error inserting 'wct1xxp.ko': -1 Unknown symbol in module [root at asterisk zaptel-1.4.7.1]# some advice? thanks. -- .-

...tran TSU 600 in the mail. I seem to be having a problem with the T100P card. So far I have done the following: vi zaptel.conf fxoks=1-22 fxsks=23-24 ... vi zapata.conf ... signalling=fxo_ks ... channel => 1-22 ... signalling=fxs_ks ... channel => 23-24 I then run modprobe zaptel modprobe wct1xxp ztcfg -vv There are no errors to report. In /proc/zaptel/1 all of the configured channels are listed. However, I do not have an LED lit up on the T100P. To me, it makes sense that the green LED sould be lit up when the driver is loaded (like the TDM400P). Is an LED supposed to be lit up? Do I...

...th dahdi-linux 2.2.0.2, dadhi- linux-complete 2.0.0+2.0.0, 2.1.0.2+2.1.0.2, and 2.2.0.2+2.2.0. The card is a Digium TE220B which uses the wct4xxp module. This does not happen, on the same systems and kernel version, with a TE121 using the wcte12xp module nor does it happen with a T100P using wct1xxp. OS is CentOS 5.3, and happens with kernel versions 2.6.18-164.el5 and 2.6.18-128.el5. I'm posting this wondering if anyone else has seen similar behavior. /etc/dahdi/system.conf: span=1,1,0,esf,b8xs bchan=1-23 dchan=24 loadzone=us defaultzone=us /etc/dahdi/modules: wc...

...install wctdm && /sbin/ztcfg install wctdm24xxp /sbin/modprobe --ignore-install wctdm24xxp && /sbin/ztcfg install ztdynamic /sbin/modprobe --ignore-install ztdynamic && /sbin/ztcfg install ztd-eth /sbin/modprobe --ignore-install ztd-eth && /sbin/ztcfg install wct1xxp /sbin/modprobe --ignore-install wct1xxp && /sbin/ztcfg install wcte11xp /sbin/modprobe --ignore-install wcte11xp && /sbin/ztcfg install pciradio /sbin/modprobe --ignore-install pciradio && /sbin/ztcfg install ztd-loc /sbin/modprobe --ignore-install ztd-loc &&...

Hi, I had a wct1xxp in my asterisk server, but I migrated to a cisco sip gateway, and then unplugged the e1. I then changed zaptel's Makefile to include ztdummy and ran modprobe ztdummy Music on hold for queues is not working well... it is simply mute. I realized that, while waiting on a Queue, if I ran a reload...

Hi, using Sangoma drivers: - doing 'lsmod', I see: zaptel ... wanpipe,wctdm24xxp,wctdm,wcfxo,wcte11xp,wct1xxp,wct4xxp,tor2 I'd like to avoid loading all these modules. What have I to do? - do I need to have 'zaptel' startup script under /etc/init.d ? Thanks -- Domenico Viggiani