Displaying 20 results from an estimated 400 matches for "b8zs".
2012 Dec 21
2
dahdi timing source multiple cards
I have a box with 12 T1s (4 Te410P cards). The PSTN provider is reporting
slips and ask me to update the clock source. I have my system.conf set as
the following but when I run dahdi_scan only the ports on Card 1 are showing
up with syncsrc=1
system.conf :
span=1,1,0,esf,b8zs
bchan=2-24
mtp2=1
span=2,2,0,esf,b8zs
bchan=26-48
mtp2=25
span=3,3,0,esf,b8zs
bchan=49-72
span=4,4,0,esf,b8zs
bchan=73-96
span=5,5,0,esf,b8zs
bchan=97-120
span=6,6,0,esf,b8zs
bchan=121-144
span=7,7,0,esf,b8zs
bchan=145-168
span=8,8,0,esf,b8zs
bchan=169-192...
2005 Aug 10
2
ZAP bchan and dchan HELP!!
...ter channel '1-190'
Aug 10 16:33:32 WARNING[8954]: loader.c:403 __load_resource:
chan_zap.so: load_module failed, returning -1
Do I HAVE to have a dchannel on every DS1? They want an extra $100 per
dchannel.
PLEASE HELP.
I can have set the cards as follows:
zaptel.conf:
span=1,1,0,esf,b8zs
span=2,0,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,0,0,esf,b8zs
span=5,0,0,esf,b8zs
span=6,0,0,esf,b8zs
span=7,0,0,esf,b8zs
span=8,0,0,esf,b8zs
bchan=1-190
dchan=191
dchan=192
loadzone = us
defaultzone=us
zapata.conf:
switchtype = 5ess
signalling = pri_cpe
group = 2
context=internal
channel =>...
2011 Aug 03
1
TE410P hardware problems
...dahdi_scan
[9]
active=yes
alarms=RED/LFA/LMFA
description=T4XXP (PCI) Card 2 Span 1
name=TE4/2/1
manufacturer=Digium
devicetype=Wildcard TE410P (4th Gen) (VPMOCT128)
location=PCI Bus 10 Slot 04
basechan=193
totchans=24
irq=50
type=digital-T1
syncsrc=0
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[10]
active=yes
alarms=RED/LFA/LMFA
description=T4XXP (PCI) Card 2 Span 2
name=TE4/2/2
manufacturer=Digium
devicetype=Wildcard TE410P (4th Gen) (VPMOCT128)
location=PCI Bus 10 Slot 04
basechan=217
totchans=24
irq=50
type=digital-T1
syncsrc=0
lbo=0 db...
2004 Dec 03
3
Two zaptel T1 cards: no clock from one
...0 0 IO-APIC-level t4xxp
lsmod:
Module Size Used by
wct1xxp 17568 0
wct4xxp 70048 0
zaptel 226436 222 wct1xxp,wct4xxp
e1000 87348 0
crc_ccitt 3072 1 zaptel
zaptel.conf:
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,3,0,esf,b8zs
span=4,4,0,esf,b8zs
span=5,0,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
bchan=49-71
dchan=72
bchan=73-95
dchan=96
fxoks=97-108
#fxoks=109-120
loadzone = us
defaultzone=us
asterisk/zapata.conf:
[channels]
language=en
echocancel=yes
echocancelwhenbrid...
2011 Jan 05
0
TE420 issue: card 0 span N: isr2=XX isr3=Y
...instead of pri_cpe), and would disappear when connecting to
real T1 lines, or is caused by the new hardware.
Once the messages have started, they continue even if I stop Asterisk;
in order to stop them I need to shut down Zaptel too.
Originally I had the following in zaptel.conf:
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,3,0,esf,b8zs
span=4,4,0,esf,b8zs
And then, wondering if it was to do with timing slips, tried this:
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,0,0,esf,b8zs
That didn't help, so I then tried this:
span=1,0,0,esf,b8zs
span=2,0,0,esf,b8zs
span...
2006 Apr 27
12
PRIs from two different telco
...s from different telcos
(span 1 and span 2). I can get one working, but not the other. However,
if I use vpmsupport=0 when loading the wct4xxp module, they both work.
But here is the problem, vpmsupport=0 disables the on board echo
cancellation. Any ideas?
BTW, here is zaptel.conf
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
loadzone=us
defaultzone=us
2005 Jun 11
4
PRI Trouble
...the following error on my PRI line
which connects my asterisk server to a Norstar 0x32 key system.
The asterisk zaptel.conf file was configure as follows and this config
worked for 6 months until friday. Nothing was changed on either system
prior to friday. here is teh zaptel.conf
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
To try to fix the problem i changed the timing on span 2 from 0 to 1
span=1,0,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
However i still get the same error. Please help we cannot connect call
form my norst...
2009 Dec 28
2
Multiple Digium cards with one NFAS trunkgroup
...audio.
Any ideal on what would cause this? I tried the latest Zaptel and then a
older version to, same issue.
Here is what the config files look like, any help would be great on this,
ive Googled and can't seem to find what else to try!
zaptel.conf
loadzone=us
defaultzone=us
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
span=3,1,0,esf,b8zs
bchan=49-72
#dchan=72
span=4,1,0,esf,b8zs
bchan=73-96
#dchan=96
span=5,1,0,esf,b8zs
bchan=97-120
#dchan=120
span=6,1,0,esf,b8zs
bchan=121-144
#dchan=144
zapata.conf
[trunkgroups]
trunkgroup => 1,24,48
spanmap...
2003 Nov 20
4
T1 / Channel Bank Configuration
...|
| | | |
| | -------------------
--------------
| Asterisk |
| |
| 2 T1 Cards |
| |
| |
| |
--------------
With this setup what should the zaptel & zapata configs look like.....
zaptel.conf -
span=1,0,0,esf,b8zs
E&M=1-24 (I am going to be doing DID/DOD Lines)
zapata.conf -
signalling=fxo_ks
context=blah
group=1
channel => 1-24
Here is where my confusion comes in. Under Zaptel.conf it appears that
you are just configuring the first card. If this is so, do you not need
to configure the second c...
2008 Mar 04
4
Mitel SX-200 + *
...EL:
I built a Crossover cable and connected it like this:
PSTN--T1--ASTRISK--T1--OLD MITEL
-Crossover Cable Pin-out:
1 - 4
2 - 5
4 - 1
5 - 2
Mitel Settings:
Line Coding = B8ZS Framing = D4 (T1 Card 9109-021-001-NA)
(My config: span=1,1,0,d4,b8zs & e&m=1-24)
The card is a 24 channel T1 - not a PRI right? (T1 E&M Emulation Trunk:
1)
So does that mean I use E&M with Winkstart?
(signalling=em_w) (is this spelt right?)...
2010 Jul 08
1
not sure what to change to point the timing to the at&t circuits?
# Span 1
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
echocanceller=mg2,1-23
# Span 2
span=2,2,0,esf,b8zs
bchan=25-47
dchan=48
echocanceller=mg2,25-47
# Span 3
span=3,3,0,esf,b8zs
bchan=49-71
dchan=72
echocanceller=mg2,49-71
# Span 4
span=4,4,0,esf,b8zs
bchan=73-95
dchan=96
echocanceller=mg2,73-95
# Global
loadzone = us
defa...
2009 May 19
2
Unable to make outbound calls
...ails below:
geriatrix ~ # dahdi_scan
[1]
active=yes
alarms=OK
description=T2XXP (PCI) Card 0 Span 1
name=TE2/0/1
manufacturer=Digium
devicetype=Wildcard TE210P (4th Gen)
location=Board ID Switch 0
basechan=1
totchans=24
irq=48
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)
coding_opts=B8ZS,AMI
framing_opts=ESF,D4
coding=B8ZS
framing=ESF
[2]
active=yes
alarms=RED
description=T2XXP (PCI) Card 0 Span 2
name=TE2/0/2
manufacturer=Digium
devicetype=Wildcard TE210P (4th Gen)
location=Board ID Switch 0
basechan=25
totchans=24
irq=48
type=digital-T1
syncsrc=1
lbo=0 db (CSU)/0-133 feet (DSX-1)...
2004 May 23
5
PRI problem???
...The box is
quite hefty, dual Zeon 2.8s with SCSI drives and 2Gb of memory. I have a 4
port Digium T1 card for channel bank and PRI access.
I activated a PRI from a local CLEC (DMS-500 based, National protocol).
This PRI is on slot 2 of the card and is set as the primary timing source.
It is ESF/B8ZS.
All the software is latest CVS HEAD as of 5/22/04.
My problem lies in random intermittent drops of calls. The entire PRI seems
to disappear, dropping all current established calls. I see occasional
printouts on an asterisk management console showing all 23 B channels
resetting with no reason...
2011 Aug 16
1
PRI Problem
I am having a problem with a new PRI turn-up on dahdi 2.5.0 and
asterisk 1.8.5 that I have not seen before. The PRI is setup as B8ZS,
ESF and the span shows up and ok. This PRI is merely a crossover T1
going into an old DC0 class 5 switch.
I am getting the following errors over and over again
[Aug 16 10:26:10] NOTICE[8002]: chan_dahdi.c:3043
my_handle_dchan_exception: PRI got event: HDLC Bad FCS (8) on
D-channel of span 1
[Aug...
2007 Apr 19
2
3rd T1 of quad card won't change signaling
...el 47, PRI Signalling
signalling
chan_zap.c: Signalling requested on channel 49 is PRI
Signalling but line is in E & M Immediate signalling
chan_zap.c: Unable to register channel '49-72'
loader.c: chan_zap.so: load_module failed, returning -1
----------ZAPTEL.CONF-------
span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
#span=2,2,1,esf,b8zs #have tried this way as well
span=2,1,0,esf,b8zs
bchan=25-47
dchan=48
span=3,0,0,esf,b8zs
e&m=49-72
-----------ZAPATA.CONF--------
[channels]
language=en
usecallerid=yes
callerid=asreceived
callwaiting=no
relaxdtmf=no
group=0
callgroup=0
faxdetect=no...
2005 Oct 04
2
Quad PRI Problems
...ot event: HDLC Bad FCS (8) on Primary
D-channel of span 3
Telco claims the PRI's are fine on their end and that it is my unit.
Is this timing? (google somewhat leads to this) I am running 1.08
asterisk zaptel libpri.
Any help would be greatly appreciated.
~ron
Zaptel.conf
span=1,1,0,esf,b8zs # connects to an Adtran FXS TA624
e&m=1-24
span=2,1,0,esf,b8zs # Connects to Bell Company 1
bchan=25-47
dchan= 48
span=3,1,0,esf,b8zs # Connects to Bell Company #2
bchan=49-71
dchan= 72
span=4,1,0,esf,b8zs # Connects to Brook Trout CArd
e&m=1-4
defaultzone=us
loadzone=us
[channels]
conte...
2004 Dec 05
3
PRI configuration problem
...xt: 1 Cause: Requested channel not available (44),
class = Network Congestion (2) ]
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Null, peerstate Null
NEW_HANGUP DEBUG: Destroying the call, ourstate Null, peerstate Null
====================================
Zaptel.conf
-----------
span=1,1,0,esf,b8zs
span=2,2,0,esf,b8zs
span=3,0,0,esf,b8zs
span=4,0,0,esf,b8zs
bchan=1-23
dchan=24
bchan=25-47
dchan=48
bchan=49-96
loadzone = us
defaultzone=us
=====================================
Zapata.conf
-----------
[trunkgroups]
trunkgroup => 1,24,48
spanmap => 1,1,1
spanmap => 2,1,2
spanmap => 3,...
2004 Mar 16
7
PRI Errors
...20
>Mar 14 03:11:59 NOTICE[15376]: Alarm cleared on channel 21
>Mar 14 03:11:59 NOTICE[15376]: Alarm cleared on channel 22
>Mar 14 03:11:59 NOTICE[15376]: Alarm cleared on channel 23
>
>/etc/zaptel.conf
>========================================================
>span=1,1,0,esf,b8zs
>span=2,0,0,esf,b8zs
>span=3,0,0,esf,b8zs
>span=4,0,0,esf,b8zs
>bchan=1-23
>dchan=24
>bchan=25-47
>dchan=48
>bchan=49-71
>dchan=72
>bchan=73-95
>dchan=96
>
>/etc/asterisk/zapata.conf
>===============================================
>[channels]
>conte...
2007 Feb 13
4
Nortel 81C MSDL Trunking to Asterisk TE110P, Nortel Resetting PRI Channels
...igium
TE110P
REQ prt
TYPE adan dch 10 Zaptel.conf
loadzone
= us
ADAN DCH 51 defaultzone=us
CTYP MSDL span=1,1,0,esf,b8zs
(also tried 1,0,0,esf,b8zs)
GRP 1 bchan=1-23
DNUM 7 dchan=24
PORT 1 span=2,1,0,esf,b8zs
(also tried 2,0,0,esf,b8zs)
DES Asterisk VOIP...
2005 Mar 06
3
Zaptel.conf and multiple T1 woes
...handed to me (I
inherited this Asterisk project, btw). These configs are likely a train
wreck, so if anybody could possible either generate a config that would
work, or explain a somewhat laymens terms how I can go about making a
good config, I'd appreciate it.
zaptel.conf:
span=1,0,0,esf,b8zs
span=2,0,0,esf,b8zs
fxoks=1-24
bchan=12-23,36-47
dchan=24,48
loadzone = us
fxsks=49-53
and zapata.conf:
context=from-pstn
signalling=pri_cpe
switchtype=national
faxdetect=incoming
usecallerid=yes
echocancel=yes
echocancelwhenbridged=no
echotraining=400
group=0
channel=12-23,36-47
context=from...