asterisk users - Sep 2004 - One Question

An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040913/0d2c3483/attachment.htm
-------------- next part --------------
 Hi friends,

I used following commands to configure my zaptel card 

   1.modprobe zaptel
   2.modprobe wct1xxp
   3.ztcfg -vvv
   4.zttool

the problem is when I type "zttool" command it shows

RED             Digium Wildcard T100P T1/PRI Card 0   




my zaptel.conf look like this

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone=us
defaultzone=us

the above 5 lines only placed in my zaptel.conf file


can any one suggest how to get ok signal.



                   thanks in advance






Regards
Murali

On 13 Sep 2004, Murali wrote:

[snip]
> the problem is when I type "zttool" command it shows
> 
> RED             Digium Wildcard T100P T1/PRI Card 0   
> 
> my zaptel.conf look like this
> 
> span=1,1,0,esf,b8zs
[snip]
> can any one suggest how to get ok signal.
There are several possible error sources. What is your T1 connected to? If 
it isn't a pstn connection it may not provide a clock source. You may also 
need a T1 crossover cable (which is not the same as an ethernet crossover 
cable). Another possibility is that another line code than esf,b8zs is 
used.

Peter

An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040916/72fd793b/attachment.htm
-------------- next part --------------
 ?
Hi friends,

Redhat9.0 installed in my machine.Asterisk1.0 installed in that machine. 
Thereis no mpg123 player. So, I download the mpg123 player and installed it. 
My sound card is configured correctly. 
When I tried to check asterisk feature SetMusicOnHold its not working im not
able to hear any sounds.

But the same config (extensions.conf and musiconhold.conf) is worked for
Mepis2003 in another machine.

 Any one can suggest me


             Thanks in advance


Regards
Murali

On Thu, 2004-09-16 at 09:35 +0000, Murali wrote:
>   
> Hi friends,
> 
> Redhat9.0 installed in my machine.Asterisk1.0 installed in that machine. 
> Thereis no mpg123 player. So, I download the mpg123 player and installed
it.
> My sound card is configured correctly. 
> When I tried to check asterisk feature SetMusicOnHold its not working im
not able to hear any sounds.
> 
> But the same config (extensions.conf and musiconhold.conf) is worked for
Mepis2003 in another machine.
> 
>  Any one can suggest me
Check the version of mpg123 is it 0.59r this is the only version that
really works.


-- 
Dave Cotton <dcotton@linuxautrement.com>

An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20040929/33899f44/attachment.htm
-------------- next part --------------
Hello asterisk friends,

 I have one question regarding asterisk CLI.
 I am able to do dial from CLI like this
 
        CLI> dial 4008

48 is ringing 
I added entry in extensions.conf like this

[local]
exten => 48,1,Dial(SIP/4001,20,Ttr)


But, I can not able to answer that call from CLI. 
I don't know how to do that.

If  Any  (soft/hard) phone is ringing,
I want to answer that call from CLI.

Can any one help me.


          Thanks for your help




Regards
Murali