Xen users - Aug 2011 - Using of bonded interfaces for xen dom0 (debian)

Hello,

Where can I find a link (or docs) to *working* network config for xen 4.1.2?

My tests (s. below) were not successful.

Thank you in advance for any hints.

Regards, Mark

# ---
root@xen411dom0:~# cat /etc/network/interfaces
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.

auto lo
iface lo inet loopback

auto bond0
iface bond0 inet static
     ##bridge_ports eth0
     address 192.168.1.150
     netmask 255.255.255.0
     network 192.168.1.0
     broadcast 192.168.1.255
     gateway 192.168.1.1
     slaves eth0 eth2
     bond-mode active-backup
     #bond-mode 802.3ad
     bond-miimon 100
     bond-downdelay 200
     bond-updelay 200

#auto xenbr0
#iface xenbr0 inet static
#    bridge_ports bond0
#    #bridge_ports eth0 eth2
#    address 192.168.1.150
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1

auto bond1
iface bond1 inet static
     ##bridge_ports eth0
     address 10.0.1.150
     netmask 255.255.255.0
     network 10.0.1.0
     broadcast 10.0.1.255
     gateway 10.0.1.1
     slaves eth1 eth3
     bond-mode active-backup
     #bond-mode 802.3ad
     bond-miimon 100
     bond-downdelay 200
     bond-updelay 200


#auto xenbr0
#iface xenbr0 inet static
#    bridge_ports eth0 eth2
#    address 192.168.1.150
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1

#auto xenbr1
#iface xenbr1 inet static
#    bridge_ports eth1
#    address 192.168.1.151
#    broadcast 192.168.1.255
#    netmask 255.255.255.0
#    gateway 192.168.1.1
#
#auto xenbr2
#iface xenbr2 inet static
#    bridge_ports eth2
#    address 10.0.1.152
#    broadcast 10.0.1.255
#    netmask 255.255.255.0
#    gateway 10.0.1.1
#
#auto xenbr3
#iface xenbr3 inet static
#    bridge_ports eth3
#    address 10.0.1.153
#    broadcast 10.0.1.255
#    netmask 255.255.255.0
#    gateway 10.0.1.1

# 
----------------------------------------------------------------------------- 

root@xen411dom0:/etc/xen# grep -v "^ *#[^#]" xend-config.sxp

(xend-http-server yes)
(xend-unix-server yes)

(xend-port            8000)

### (network-script network-bridge)
### (network-script ''network-bridge netdev=bond0
antispoof=yes'')

(vif-script vif-bridge)

## Use the following if network traffic is routed, as an alternative to the

## Use the following if network traffic is routed with NAT, as an 
alternative

(dom0-min-mem 0)
(dom0-cpus 0)

(vnc-listen ''0.0.0.0'')
(vncpasswd '''')

-- 
ms@it-infrastrukturen.org


_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users