search for: bond1

Hi, I've using linux bonding in active-backup mode to combine two pairs of GigE NICs (eth0/eth1, eth2/eth3) into two logical bonds (bond0/bond1). All is working fine. However, I would like to specify a primary interface for each bond. This means I need to specify different options to the bonding module for each bond. I have tried every conceivable incantation of options and cannot get the kernel to recognize the second set of options. Ini...

Hi All, I''m configuring my natting-firewall to do some tc shaping. Some traffic has to be shaped on 30mbit, some on 10mbit all the others are unlimited. The configuring and filtering works correctly. The traffic that is shaped at 30mbit is correct, but the traffic that is shapped at 10mbit only gets to 100KB/sec. It is on a device configured with bonding (both in and out interface).

Hi List, We're using bonding to create bond0 with 2 NICs, and noticing that CentOS 5 2.6.18-8.1.14.el5 (and presumably older) creates bond1 as well. I'd like to remove bond1 from the system, so that our monitoring scripts don't pick it up, except for those machines that actually do have a bond1. So... how does one remove bond1? Thanks! Misc info below of configuration and what doesn't work. best, Jeff % cat /etc/m...

Hi! Is it HTB fully compatible with BOND interface? I have this setup (mode= fault tolerance) : BOND0 -> ETH0 + ETH1 BOND1 -> ETH2 + ETH3 ( http://www.kernel.org/pub/linux/kernel/people/marcelo/linux-2.4/Documentation/networking/bonding.txt ) HTB work very well with Class over BOND0. If I add Class for BOND1 it generate balance errors. Also with HTB.init (http://sourceforge.net/projects/htbinit) I have the some p...

Hello, Could someone tell me, how can I select from a dataframe only those columns whose names contain a certain text? For example, if the column names are "Bond1.Creditclass","Bond1.Price","Bond2.Creditclass","Bond2.Price", how do I select only the columns corresponding to Bond1? Thanks a lot, Mihai [[alternative HTML version deleted]]

Hai, That bond0 interface, you might want to change that the interface name to bond1 Depending on the bonding settings, you might have hit a reserved name. I lots my docu on that but i know i configured a bond1 because bond0 didn work right. And then check these. wbinfo -pPt ( or wbinfo -p && wbinfo -P && wbinfo -t ) wbinfo --sids-to-unix-ids S-1-22-2-10513 w...

...ne of my Mellanox NIC renamed to rename6, instead of eth1. The right names of NICs in my system should be: eth0 Mellanox NIC eth1 Mellanox NIC eth2 Intel NIC eth3 Intel NIC eth4 Intel NIC eth5 Intel NIC eth0 and eth1 will combined as bond1 with mode 4. However, the current names are: eth0 Mellanox NIC rename6 Mellanox NIC eth1 Intel NIC eth2 Intel NIC eth4 Intel NIC eth5 Intel NIC And bond1 still consist of eth0 and eth1, but eth1 is Intel NIC, instead of Mellanox NIC. F...

Hi, Sorry for the broad distribution, I''m not sure who best can help me. I''m trying to add a new interface stanza to /etc/network/interfaces. With augtool, I can accomplish this with the following: set /files/etc/network/interfaces/iface[last()+1] bond1 set /files/etc/network/interfaces/iface[last()]/family inet set /files/etc/network/interfaces/iface[last()]/method dhcp set /files/etc/network/interfaces/iface[last()]/slaves eth2 I''ve been able to translate that to the following Puppet resource: augeas { "bond1": context =&g...

Hi All I have two bond interfaces namely, bond0 and bond1. bond0 has two ethernet interfaces associated with it and bond1 also has two ethernet interfaces associated with it. Now i create a bridge interface namely br20 (20 being the VLAN) and assign it a IP Address , subnet mask and the default gateway. I will use this IP to reach the server. So it i...

Am 22.02.19 um 12:16 schrieb L.P.H. van Belle via samba: > Hai, > > Well, i did some extra checking, gone throug more logs. > ... Nothing. No errors. Sorry, i cant find anything.. > > Almost all my server run unattended updates, execpt the DC's. > > I had a few that where waiting for a reboot tomorrow night, all now rebooted, > and no problems before and

Hi, In one of our xen server, I am using two bonding. bond0 : Is for trunk, where the vlans are attached , port eth0 & eth1 is attached to bond0 bond1 : eth2 & eth3 are attached to bond1, where physical ip has been set . In the /etc/xen/xend-config.sxp, I am using (network-script *multi-network-bridge*) , the multi-network-bridge is as follows: [root@lnhst039 scripts]# cat multi-network-bridge #!/bin/sh # vconfig set_name_type DE...

...2.0.38-2.el5_2.1 installed cman.i386 2.0.84-2.el5_2.2 installed Every machine (hp blade server ) has 4 interfaces, bounded in this way: Eth0, eth1 -> bond0 -> connection for public service ( 10.0.181.x ) Eth2,eth3 -> bond1 -> connection for intra-cluster communication ( 192.168.44.x ) bond0 Link encap:Ethernet HWaddr 00:21:5A:48:DA:BE inet addr:10.0.181.41 Bcast:10.0.181.255 Mask:255.255.255.0 inet6 addr: fe80::221:5aff:fe48:dabe/64 Scope:Link UP BROADCAST RUNNING MASTER MUL...

...512 /sbin/ifconfig eth0 0.0.0.0 txqueuelen 10000 mtu 1500 up /sbin/ifconfig eth1 0.0.0.0 txqueuelen 10000 mtu 1500 up /sbin/ifconfig eth2 0.0.0.0 txqueuelen 10000 mtu 1500 up /sbin/ifconfig eth3 0.0.0.0 txqueuelen 10000 mtu 1500 up #To bond0 /sbin/ifconfig eth0 down /sbin/ifconfig eth2 down #To bond1 /sbin/ifconfig eth1 down /sbin/ifconfig eth3 down modprobe bonding max_bonds=2 ifconfig bond0 0.0.0.0 up ifenslave-2.6 bond0 eth0 eth2 ifconfig bond1 0.0.0.0 up ifenslave-2.6 bond1 eth1 eth3 /usr/local/sbin/brctl addbr br999 /sbin/vconfig add bond0 999 /sbin/vconfig add bond1 999 /sbin/ifco...

...et/ixgbe/ixgbe.ko version: 3.15.1-k license: GPL description: Intel(R) 10 Gigabit PCI Express Network Driver author: Intel Corporation, <linux.nics at intel.com> srcversion: B390E9D9904338B52C2E361 I have updated this to 3.18.7-1 as well, same results # ifconfig bond1 |grep error RX packets:4476995 errors:6940 dropped:0 overruns:0 frame:6940 TX packets:2130564 errors:0 dropped:0 overruns:0 carrier:0 # cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: adaptive load balancing Primary Slave:...

Hi, I configured some ha services using heartbeat, I have this on my log: Nov 14 09:59:06 mail1 heartbeat[3932]: ERROR: Unable to send bcast [-1] packet: Operation not permitted Nov 14 09:59:06 mail1 heartbeat[3932]: ERROR: write failure on bcast bond1.: Operation not permitted how allow broadcast only on some interfaces with shorewall? attacched is shorewall status Thanks Nicola

...enabled a trunk on my swith to get 2GB. This is the network example of my system setting. First setup and match some mac adresses.. ( bond0 is a reserved interface dont use it. ) ! Note, below are 4 different files. ! ############################################# # /etc/systemd/network/30-bond1-dev1.network [Match] MACAddress=aa:b2:bc:02:d6:01 [Network] Bond=bond1 ############################################# # /etc/systemd/network/30-bond1-dev2.network [Match] MACAddress=aa:b2:bc:02:d6:01 [Network] Bond=bond1 ############################################# # /etc/systemd/network/30-bon...

...6 --bootproto=static --onboot=yes --hostname=box.example.com --ip=192.168.1.3 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=192.168.1.1 --bondslaves=p1p1,p1p2 --bondopts=mode=active-backup,primary=p1p1,miimon=80,updelay=60000 # Cluster network, not created on install network --device=bond1 --noipv6 --nodns --nodefroute --bootproto=static --onboot=yes --ip=192.168.2.2 --netmask=255.255.255.0 --bondslaves=em1,em2 --bondopts=mode=active-backup,primary=em1,miimon=80,updelay=60000 # ISCSI network network --device=p1p3 --noipv6 --nodns --nodefroute --bootproto=static --onboot=yes --mtu=90...

...ing adapter Jan 17 23:40:14 xen01 kernel: ixgbe 0000:04:00.1 eth6: Reset adapter Jan 17 23:40:15 xen01 kernel: ixgbe 0000:04:00.1 eth6: PCIe transaction pending bit also did not clear. Jan 17 23:40:15 xen01 kernel: ixgbe 0000:04:00.1: master disable timed out Jan 17 23:40:15 xen01 kernel: bonding: bond1: link status down for interface eth6, disabling it in 200 ms. Jan 17 23:40:15 xen01 kernel: bonding: bond1: link status definitely down for interface eth6, disabling it [...] repeated every second or so. >> Are the devices connected to the same network infrastructure? > > There are...

On 01/27/2017 06:08 AM, Karel Hendrych wrote: > Have you tried to eliminate all power management features all over? I've been trying to find and disable all power management features but having relatively little luck with that solving the problems. Stabbing the the dark I've tried different ACPI settings, including completely disabling it, disabling CPU frequency scaling, and setting

...s it? Please advice. My smb.conf looks like bellow. workgroup = EMEA server string = SambaStorage password server = EMEA.NET passdb backend = tdbsam smb encrypt = disabled realm = EMEA.NET security = ADS interfaces = 192.168.85.124 192.168.85.127 127.0.0.1 # interfaces = bond1:1 bond1:2 bond1 lo bind interfaces only = no local master = no preferred master = no os level = 33 dns proxy = yes wins support = no wide links = yes unix extensions = no log file = /var/log/samba/smb3x.log max log size = 50000 socket options = TCP_NODELAY IPT...