search for: downdelay

...ork/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode 0 auto br0 iface br0 inet static address 100.x.x.x netmask 255.255.255.0 network 100.x.x.0 broadcast 100.x.x.255 gateway 100.x.x.19 bridge_ports bond0 bond-miimon 100 bond-lacp_rate 1 bond-downdelay 200 bond-updelay 200 address 0.0.0.0 netmask 0.0.0.0 *** *** /etc/sysctl.conf #kernel.printk = 3 4 1 3 #net.ipv4.conf.default.rp_filter=1 #net.ipv4.conf.all.rp_filter=1 #net.ipv4.tcp_syncookies=1 net.ipv4.ip_forward=1 #net.ipv4.conf.br0.proxy_arp=1 #net.ipv4....

...auto bond0 iface bond0 inet static ##bridge_ports eth0 address 192.168.1.150 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 slaves eth0 eth2 bond-mode active-backup #bond-mode 802.3ad bond-miimon 100 bond-downdelay 200 bond-updelay 200 #auto xenbr0 #iface xenbr0 inet static # bridge_ports bond0 # #bridge_ports eth0 eth2 # address 192.168.1.150 # broadcast 192.168.1.255 # netmask 255.255.255.0 # gateway 192.168.1.1 auto bond1 iface bond1 inet static ##bridge_ports eth0 addres...

...just did the upgrade to 1908, I didn't experience the problem you had, I can't see anything out of the ordinary in your network files. I originally set up my bond using nmtui Here is my configuration: #Bond: BONDING_OPTS="ad_select=stable all_slaves_active=0 arp_all_targets=any downdelay=0 fail_over_mac=none lp_interval=1 miimon=100 min_links=0 mode=802.3ad num_grat_arp=1 num_unsol_na=1 primary_reselect=always resend_igmp=1 updelay=0 use_carrier=1 xmit_hash_policy=layer2" TYPE=Bond BONDING_MASTER=yes PROXY_METHOD=none BROWSER_ONLY=no BOOTPROTO=none IPADDR=a.b.c.249 PREFIX=24...

...to measure the traffic of domUs using vnstat without luck. My configuration: Debian 6.0.3 xen 4.0.1 vnstat 1.11 I''m using bonding with two network cards. auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode active-backup bond-miimon 100 bond-updelay 200 bond-downdelay 200 bond-primary eth0 auto br0 iface br0 inet static address x.x.x.x netmask x.x.x.x network x.x.x.x broadcast x.x.x.x gateway x.x.x.x bridge_ports bond0 bridge_fd 0 bridge_hello 2 bridge_maxage 12 bridge_ageing 0...

Hi! I just upgraded a machine to 7.7.1908 and the default route is not being set on boot. This particular server has a bonded interface, and the corresponding configuration for the master is ( /etc/sysconfig/network-scripts/ifcfg-bond0): TYPE=Bond BOOTPROTO=none DEFROUTE=yes IPV4_FAILURE_FATAL=yes NAME=bond0 DEVICE=bond0 ONBOOT=yes IPADDR=10.3.20.131 PREFIX=24

...d? My config:- Bonded ethernet connected to trunks on Cisco 3750 stack with connection as follows:- eth0 --> bond0 eth1 --> bond0 --> br200 --> vif2.0 /etc/network/interfaces:- iface bond0 inet manual slaves eth0 eth1 bond_mode 5 bond-miimon 100 bond-downdelay 200 bond-updelay 200 auto br200 iface br200 inet static address 172.31.1.66 gateway 172.31.1.65 netmask 255.255.255.240 bridge_ports bond0 bridge_maxwait 0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off ro...

...d? My config:- Bonded ethernet connected to trunks on Cisco 3750 stack with connection as follows:- eth0 --> bond0 eth1 --> bond0 --> br200 --> vif2.0 /etc/network/interfaces:- iface bond0 inet manual slaves eth0 eth1 bond_mode 5 bond-miimon 100 bond-downdelay 200 bond-updelay 200 auto br200 iface br200 inet static address 172.31.1.66 gateway 172.31.1.65 netmask 255.255.255.240 bridge_ports bond0 bridge_maxwait 0 bridge_fd 9 bridge_hello 2 bridge_maxage 12 bridge_stp off ro...