search for: bridge_port

...nk you in advance for any hints. Regards, Mark # --- root@xen411dom0:~# cat /etc/network/interfaces # Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or # /usr/share/doc/ifupdown/examples for more information. auto lo iface lo inet loopback auto bond0 iface bond0 inet static ##bridge_ports eth0 address 192.168.1.150 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 slaves eth0 eth2 bond-mode active-backup #bond-mode 802.3ad bond-miimon 100 bond-downdelay 200 bond-updelay 200 #auto xenbr0 #ifa...

...ing instructions in /usr/share/doc/xen-utils-common/README.debian, I created a /etc/network/interfaces file like this: auto br0 iface br0 inet static address 192.168.0.26 network 192.168.0.0 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.1 bridge_ports all When the machine reboots, I see: br0 Link encap:Ethernet HWaddr 00:1e:4f:11:51:5f inet addr:192.168.0.26 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2174 errors:0 dropped:0 overruns:0 frame:0 TX packets:531 errors:0 dropped:0...

Hello, can anybody help me how to configure vlans? There are vlans: vlan2 vlan3 vlan30 Server has one nic - eth0. vlan2 should be dom0 eth0(peth0) for management Each vlan3 and vlan30 should be has its own bridge. How to make it? Br Peter _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...iface lan1 inet static address 10.0.1.254 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 #auto br-lan0 #iface br-lan0 inet static # address 10.0.0.254 # netmask 255.255.255.0 # network 10.0.0.0 # broadcast 10.0.0.255 # bridge_ports lan0 #auto br-lan1 #iface br-lan1 inet static # address 10.0.1.254 # netmask 255.255.255.0 # network 10.0.1.0 # broadcast 10.0.1.255 # bridge_ports lan1 and my interfaces looks like this: wan wan0 detect dhcp,tcpflags,nosmurfs,routefilter...

Hi all, I''m searching for a tutorial how to setup multiple network cards with xen network bridge setup in debian lenny. My problem is, bridges seams only to work if i put an ip adress in dom0 to them. Thanks, Alex _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...9000 # address 192.168.1.62 # netmask 255.255.255.0 # gateway 192.168.1.1 # dns-nameservers 192.168.1.241 192.168.1.104 slaves eno1 enp1s0f1 auto br0 iface br0 inet static address 192.168.1.62 netmask 255.255.255.0 gateway 192.168.1.1 dns-nameservers 192.168.1.241 192.168.1.104 bridge_ports bond0 #bridge_ports eno1 enp1s0f1 bridge_stp on bridge_fd 0.0 # mtu 9000 #post-up ifconfig bond0 mtu 9000 #post-up ip link set dev bond0 mtu 9000 #auto bond1 #iface bond1 inet static # address 10.100.200.62 # netmask 255.255.255.0 # bond_slaves enp3s0f1 # bond_primary enp3s0f1...

...a dummy interface tied to "untethered" bridges (as I also have physical switches plugged into the "LAN" and "DMZ" interfaces). Here is what the ''/etc/network/nterfaces'' file looks like: auto br-lan0 br-dmz0 br-adm0 iface br-lan0 inet manual bridge_ports eth0 iface br-dmz0 inet manual bridge_ports eth1 iface br-adm0 inet static address 10.253.3.2 netmask 255.255.255.0 gateway 10.253.3.1 bridge_ports dummy0 the ''br-adm0'' bridge is for remote administration of Dom0. The firewall DomU is of course tie...

...to lo eth0 eth1 eth2 eth3 iface lo inet loopback # xenbr0 -> eth0 auto xenbr0 iface xenbr0 inet static address 192.168.0.78 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.2 dns-nameservers 192.168.0.88 bridge_ports eth0 bridge_stp no bridge_fd 2 # xenbr1 -> eth1 auto xenbr1 iface xenbr1 inet manual bridge_ports eth1 bridge_stp no bridge_fd 2 # xenbr1 -> eth1 auto xenbr2 iface xenbr2 inet manual bridge_ports eth2 bridge_stp no bridge_fd 2...

...x'' ] *** With the network script in debian wheezy *** /etc/network/interfaces auto bond0 iface bond0 inet manual slaves eth0 eth1 bond-mode 0 auto br0 iface br0 inet static address 100.x.x.x netmask 255.255.255.0 network 100.x.x.0 broadcast 100.x.x.255 gateway 100.x.x.19 bridge_ports bond0 bond-miimon 100 bond-lacp_rate 1 bond-downdelay 200 bond-updelay 200 address 0.0.0.0 netmask 0.0.0.0 *** *** /etc/sysctl.conf #kernel.printk = 3 4 1 3 #net.ipv4.conf.default.rp_filter=1 #net.ipv4.conf.all.rp_filter=1 #net.ipv4.tcp_sync...

Hi all, Has anyone managed to get CentOS 6 domU (i.e. guest) working on a Debian 6 do0? Both OS''s are 32bit and I''m running XEN 4.0.1 with HVM support. A CentOS 5.6 domU works fine on this very same server though. When I start CentOS 6, I get the following error: newusaxen:~# xm create -c /xen/genocide.cfg Using config file "/xen/genocide.cfg". xenconsole: Could

Hi folks, I''ve been trying to work out this situation for a few days now without much success and dug all over the archives for similar issues, none of which seem to relate exactly. I installed Debian Etch and the Xen (3.03) kernels / binaries on a Dell server. It works fantastic with all the default configurations with one strange flaw - as soon as the /etc/xen/scripts/network-bridge

...y indicates this rule works perfectly when the traffic is bridged." I'm using bridges but it's not working obviously. /etc/network/interfaces auto br0 allow-hotplug br0 iface br0 inet static address 10.100.200.20 netmask 255.255.255.0 dns-nameservers 10.100.200.3 gateway 10.100.200.3 bridge_ports eth0 allow-hotplug br1 auto br1 iface br1 inet manual bridge_ports eth1 This is my logs: Sep 6 09:47:14 elise kernel: [71970.564974] br1: port 2(vif1.1) entering disabled state Sep 6 09:47:14 elise kernel: [71970.578040] br1: port 2(vif1.1) entering disabled state Sep 6 09:47:14 elise kerne...

...bridge priorities to both an yet I am still having the same issues. Here are some configs of both machines. -------------------[slave]-------------------- # The internal network interface auto br0 iface br0 inet static address 192.168.5.11 netmask 255.255.255.0 bridge_ports eth0 eth1 # The external network interface auto br1 iface br1 inet static address [public ip address] netmask 255.255.0.0 bridge_ports eth2 eth3 eth4 eth5 eth6 #Using ip route2 to do policy based routing. <<EOF bridge name bridge id...

...--- root at debianserver:~# cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # Local physical nic - bridge to br0 auto eth0 iface eth0 inet manual # Bridge for physical nic and tinc (on tinc-up will add tinc tap device here) auto br0 iface br0 inet dhcp bridge_ports eth0 bridge_stp off bridge_waitport 0 bridge_fd 0 Server 1 /etc/tinc/netname/tinc.conf ----------------------------------------------------- root at debianserver:~# cat /etc/tinc/netname/tinc.conf Name = debianserver AddressFamily = ipv4 Mode = switch ConnectTo = hetznerpve Compression = 0 PMT...

When I add all interfaces, the internet does not work.... eth0 = interneteth1 = lan ------------------auto eth0 iface eth0 inet static address 192.168.1.254 netmask 255.255.255.0 broadcast 192.168.1.255 auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.254 auto xenbr0 iface xenbr0 inet static

Hello! I've faced a weird problem. And I totally can't understand how libvirt handles networks. The thing that i need to do is simple. I create a bridge in my ubuntu host, the following config: *iface eth0 inet manual* * * *auto br0* *iface br0 inet dhcp* * bridge_ports eth0* * bridge_stp on* * bridge_maxwait 0* That's OK, and my bridge turns up automatically. But I don't understand why libvirt can't use it, it always want to create bridge on its own. So that when I try to create bridged network with the command: virsh virsh net-create net.xml n...

...d move them via normal and live migration. Another (possibly) important information is that I configured my virtual bridge on both worker nodes like this: auto br0 iface br0 inet static address 192.168.0.[2|3] netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 #gateway 192.168.0.1 bridge_ports eth0 bridge_stp on bridge_maxwait 0 The command "brctl show" gives me following things back: bridge name??? bridge id??? ??? ??? STP enabled??? interfaces br0??? ??? ??? 8000.003005c34278??? yes??? ??? ??? eth0 ??? ??? ??? ??? ??? ??? ??? ??? ??? ?? ???? ??? ?? vnet0 (<- only appear...

...;t work (duplicate IPs). So, to me, it would me more clear if the br0 interface has no IP. In my case, I have two nics: eth0 the interface for the host and eth1 for the guest. The eth1 part in my network/interfaces is: ... auto eth1 iface eth1 inet manual auto br0 iface br0 inet manual bridge_ports eth1 bridge_stp on bridge_maxwait 0 bridge_fd 0 ... and then in the guest you configure the IP as you want. In the host, eth1 (or whatever interface you bridge) has no IP, so it's not used, and the guest uses completely. What do you think? Regards, Leo...

...followed to setup the bridge. i'm pretty sure virbr0 is what libvirt uses.... host$ cat /etc/network/interfaces auto lo iface lo inet loopback auto br0 iface br0 inet static address 67.180.246.122 netmask 255.255.255.248 gateway 67.180.246.121 dns-nameservers 67.180.241.11 67.180.241.12 bridge_ports eth0 bridge_fd 9 bridge_maxage 12 bridge_stp off host$ virsh net-list Name State Autostart - ----------------------------------------- default active yes host$ virsh net-dumpxml default <network> <name>default</name> <uuid>e6d3...

...------ $ cat /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto eth1 iface eth1 inet dhcp wpa-driver wext wpa-ssid ##SSID## wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk ##PSK KEY## auto br0 iface br0 inet dhcp bridge_ports eth0 eth1 ----------------------------------------------------------- So, eth1 is my wireless connection, eth0 is my wired connection. Without the bridge, I'm able to make a connection on my wireless side, as on my wired side. When I bring up the bridge, nothing works ... I'm not able to...