Displaying 20 results from an estimated 90 matches for "bridge_ports".
2011 Aug 26
0
Using of bonded interfaces for xen dom0 (debian)
...nk you in advance for any hints.
Regards, Mark
# ---
root@xen411dom0:~# cat /etc/network/interfaces
# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.
auto lo
iface lo inet loopback
auto bond0
iface bond0 inet static
##bridge_ports eth0
address 192.168.1.150
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
slaves eth0 eth2
bond-mode active-backup
#bond-mode 802.3ad
bond-miimon 100
bond-downdelay 200
bond-updelay 200
#auto xenbr0
#ifac...
2013 May 20
6
Bridge networking in Debian
...ing instructions in /usr/share/doc/xen-utils-common/README.debian,
I created a /etc/network/interfaces file like this:
auto br0
iface br0 inet static
address 192.168.0.26
network 192.168.0.0
netmask 255.255.255.0
broadcast 192.168.0.255
gateway 192.168.0.1
bridge_ports all
When the machine reboots, I see:
br0 Link encap:Ethernet HWaddr 00:1e:4f:11:51:5f
inet addr:192.168.0.26 Bcast:192.168.0.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2174 errors:0 dropped:0 overruns:0 frame:0
TX packets:531 errors:0 dropped:0...
2010 May 23
4
xen4.0 debian vlan config
Hello,
can anybody help me how to configure vlans?
There are vlans:
vlan2
vlan3
vlan30
Server has one nic - eth0.
vlan2 should be dom0 eth0(peth0) for management
Each vlan3 and vlan30 should be has its own bridge.
How to make it?
Br
Peter
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
2010 Dec 12
3
weird fail with conversion to bridges?
...iface lan1 inet static
address 10.0.1.254
netmask 255.255.255.0
network 10.0.1.0
broadcast 10.0.1.255
#auto br-lan0
#iface br-lan0 inet static
# address 10.0.0.254
# netmask 255.255.255.0
# network 10.0.0.0
# broadcast 10.0.0.255
# bridge_ports lan0
#auto br-lan1
#iface br-lan1 inet static
# address 10.0.1.254
# netmask 255.255.255.0
# network 10.0.1.0
# broadcast 10.0.1.255
# bridge_ports lan1
and my interfaces looks like this:
wan wan0 detect dhcp,tcpflags,nosmurfs,routefilter...
2009 Aug 30
4
Multiple Network Cards + Multiple Bridges on debian lenny
Hi all,
I''m searching for a tutorial how to setup multiple network cards with
xen network bridge setup in debian lenny. My problem is, bridges seams
only to work if i put an ip adress in dom0 to them.
Thanks,
Alex
_______________________________________________
Xen-users mailing list
Xen-users@lists.xensource.com
http://lists.xensource.com/xen-users
2018 May 23
0
Unable to connect VMs to a bridge over bonded network on Debian 9 (works fine on Centos 7.4)
...9000
# address 192.168.1.62
# netmask 255.255.255.0
# gateway 192.168.1.1
# dns-nameservers 192.168.1.241 192.168.1.104
slaves eno1 enp1s0f1
auto br0
iface br0 inet static
address 192.168.1.62
netmask 255.255.255.0
gateway 192.168.1.1
dns-nameservers 192.168.1.241 192.168.1.104
bridge_ports bond0
#bridge_ports eno1 enp1s0f1
bridge_stp on
bridge_fd 0.0
# mtu 9000
#post-up ifconfig bond0 mtu 9000
#post-up ip link set dev bond0 mtu 9000
#auto bond1
#iface bond1 inet static
# address 10.100.200.62
# netmask 255.255.255.0
# bond_slaves enp3s0f1
# bond_primary enp3s0f1...
2006 Oct 08
0
Xen 3: Untethered bridges??
...a dummy interface tied to "untethered" bridges
(as I also have physical switches plugged into the "LAN" and "DMZ"
interfaces).
Here is what the ''/etc/network/nterfaces'' file looks like:
auto br-lan0 br-dmz0 br-adm0
iface br-lan0 inet manual
bridge_ports eth0
iface br-dmz0 inet manual
bridge_ports eth1
iface br-adm0 inet static
address 10.253.3.2
netmask 255.255.255.0
gateway 10.253.3.1
bridge_ports dummy0
the ''br-adm0'' bridge is for remote administration of Dom0. The firewall DomU
is of course tied...
2009 Sep 21
0
received packet with own address as source address
...to lo eth0 eth1 eth2 eth3
iface lo inet loopback
# xenbr0 -> eth0
auto xenbr0
iface xenbr0 inet static
address 192.168.0.78
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.2
dns-nameservers 192.168.0.88
bridge_ports eth0
bridge_stp no
bridge_fd 2
# xenbr1 -> eth1
auto xenbr1
iface xenbr1 inet manual
bridge_ports eth1
bridge_stp no
bridge_fd 2
# xenbr1 -> eth1
auto xenbr2
iface xenbr2 inet manual
bridge_ports eth2
bridge_stp no
bridge_fd 2...
2013 Aug 14
12
xen 4.3 - bridge with bonding under Debian Wheezy
...x'' ]
***
With the network script in debian wheezy
***
/etc/network/interfaces
auto bond0
iface bond0 inet manual
slaves eth0 eth1
bond-mode 0
auto br0
iface br0 inet static
address 100.x.x.x
netmask 255.255.255.0
network 100.x.x.0
broadcast 100.x.x.255
gateway 100.x.x.19
bridge_ports bond0
bond-miimon 100
bond-lacp_rate 1
bond-downdelay 200
bond-updelay 200
address 0.0.0.0
netmask 0.0.0.0
***
***
/etc/sysctl.conf
#kernel.printk = 3 4 1 3
#net.ipv4.conf.default.rp_filter=1
#net.ipv4.conf.all.rp_filter=1
#net.ipv4.tcp_synco...
2011 Sep 08
4
CentOS 6 domU on Debian 6 dom0 not working
Hi all,
Has anyone managed to get CentOS 6 domU (i.e. guest) working on a Debian 6 do0?
Both OS''s are 32bit and I''m running XEN 4.0.1 with HVM support.
A CentOS 5.6 domU works fine on this very same server though.
When I start CentOS 6, I get the following error:
newusaxen:~# xm create -c /xen/genocide.cfg
Using config file "/xen/genocide.cfg".
xenconsole: Could
2007 Mar 15
15
dom0 networking disabled
Hi folks, I''ve been trying to work out this situation for a few days now
without much success and dug all over the archives for similar issues,
none of which seem to relate exactly.
I installed Debian Etch and the Xen (3.03) kernels / binaries on a Dell
server. It works fantastic with all the default configurations with one
strange flaw - as soon as the /etc/xen/scripts/network-bridge
2010 Sep 06
1
Bug#571634: bridge loosing connection
...y indicates this rule
works perfectly when the traffic is bridged."
I'm using bridges but it's not working obviously.
/etc/network/interfaces
auto br0
allow-hotplug br0
iface br0 inet static
address 10.100.200.20
netmask 255.255.255.0
dns-nameservers 10.100.200.3
gateway 10.100.200.3
bridge_ports eth0
allow-hotplug br1
auto br1
iface br1 inet manual
bridge_ports eth1
This is my logs:
Sep 6 09:47:14 elise kernel: [71970.564974] br1: port 2(vif1.1)
entering disabled state
Sep 6 09:47:14 elise kernel: [71970.578040] br1: port 2(vif1.1)
entering disabled state
Sep 6 09:47:14 elise kernel...
2007 Apr 18
2
[Bridge] Newbie at work - need some advise/guidence please.
...bridge priorities to both an yet I
am still having the same issues. Here are some configs of both machines.
-------------------[slave]--------------------
# The internal network interface
auto br0
iface br0 inet static
address 192.168.5.11
netmask 255.255.255.0
bridge_ports eth0 eth1
# The external network interface
auto br1
iface br1 inet static
address [public ip address]
netmask 255.255.0.0
bridge_ports eth2 eth3 eth4 eth5 eth6
#Using ip route2 to do policy based routing.
<<EOF
bridge name bridge id...
2018 Aug 18
2
Bridging local physical interface to tinc
...---
root at debianserver:~# cat /etc/network/interfaces
# The loopback network interface
auto lo
iface lo inet loopback
# Local physical nic - bridge to br0
auto eth0
iface eth0 inet manual
# Bridge for physical nic and tinc (on tinc-up will add tinc tap device here)
auto br0
iface br0 inet dhcp
bridge_ports eth0
bridge_stp off
bridge_waitport 0
bridge_fd 0
Server 1 /etc/tinc/netname/tinc.conf
-----------------------------------------------------
root at debianserver:~# cat /etc/tinc/netname/tinc.conf
Name = debianserver
AddressFamily = ipv4
Mode = switch
ConnectTo = hetznerpve
Compression = 0
PMTU...
2013 Nov 01
2
network not work
When I add all interfaces, the internet does not work....
eth0 = interneteth1 = lan
------------------auto eth0 iface eth0 inet static address 192.168.1.254 netmask 255.255.255.0 broadcast 192.168.1.255
auto eth1 iface eth1 inet static address 192.168.0.100 netmask 255.255.255.0 broadcast 192.168.0.255 gateway 192.168.0.254
auto xenbr0 iface xenbr0 inet static
2010 Oct 28
1
libvirt problems. Create bridged network via cmdline?
Hello!
I've faced a weird problem. And I totally can't understand how libvirt
handles networks. The thing that i need to do is simple. I create a bridge
in my ubuntu host, the following config:
*iface eth0 inet manual*
*
*
*auto br0*
*iface br0 inet dhcp*
* bridge_ports eth0*
* bridge_stp on*
* bridge_maxwait 0*
That's OK, and my bridge turns up automatically. But I don't understand why
libvirt can't use it, it always want to create bridge on its own. So that
when I try to create bridged network with the command:
virsh virsh net-create net.xml
ne...
2011 Jul 26
1
Ping not working after a migration
...d move them via
normal and live migration.
Another (possibly) important information is that I configured my virtual bridge on both worker nodes like this:
auto br0 iface br0 inet static address 192.168.0.[2|3] netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 #gateway 192.168.0.1 bridge_ports eth0 bridge_stp on bridge_maxwait 0
The command "brctl show" gives me following things back:
bridge name??? bridge id??? ??? ??? STP enabled??? interfaces
br0??? ??? ??? 8000.003005c34278??? yes??? ??? ??? eth0
??? ??? ??? ??? ??? ??? ??? ??? ??? ?? ???? ??? ?? vnet0 (<- only appears...
2010 Jun 30
1
Some missunderstanding in the wiki page
...;t work
(duplicate IPs). So, to me, it would me more clear if the br0 interface has
no IP. In my case, I have two nics: eth0 the interface for the host and eth1
for the guest. The eth1 part in my network/interfaces is:
...
auto eth1
iface eth1 inet manual
auto br0
iface br0 inet manual
bridge_ports eth1
bridge_stp on
bridge_maxwait 0
bridge_fd 0
...
and then in the guest you configure the IP as you want. In the host, eth1 (or
whatever interface you bridge) has no IP, so it's not used, and the guest
uses completely.
What do you think?
Regards,
Leo...
2013 Dec 14
3
Re: assign static external IP to container
...followed to setup the bridge. i'm
pretty sure virbr0 is what libvirt uses....
host$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto br0
iface br0 inet static
address 67.180.246.122
netmask 255.255.255.248
gateway 67.180.246.121
dns-nameservers 67.180.241.11 67.180.241.12
bridge_ports eth0
bridge_fd 9
bridge_maxage 12
bridge_stp off
host$ virsh net-list
Name State Autostart
- -----------------------------------------
default active yes
host$ virsh net-dumpxml default
<network>
<name>default</name>
<uuid>e6d3f...
2009 Apr 27
3
[Bridge] Ubuntu: network bridging between wireless and wired connection fails
...------
$ cat /etc/network/interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet manual
auto eth1
iface eth1 inet dhcp
wpa-driver wext
wpa-ssid ##SSID##
wpa-ap-scan 1
wpa-proto RSN
wpa-pairwise CCMP
wpa-group CCMP
wpa-key-mgmt WPA-PSK
wpa-psk ##PSK KEY##
auto br0
iface br0 inet dhcp
bridge_ports eth0 eth1
-----------------------------------------------------------
So, eth1 is my wireless connection, eth0 is my wired connection.
Without the bridge, I'm able to make a connection on my wireless side,
as on my wired side.
When I bring up the bridge, nothing works ... I'm not able to...